On 30/06/2022 12:57, Alexander Dahl wrote:
Hello,
trying to build dropbear as part of a ptxdist based embedded BSP for an
armv5te target, more precisely I try to upgrade dropbear from 2020.81 to
2022.82, the previous version builds fine, the new one fails to build.
Cross toolchain is OSELAS.Toolchain-2016.06.1/arm-v5te-linux-gnueabi/
gcc-5.4.0-glibc-2.23-binutils-2.26-kernel-4.6-sanitized
According to config.log … Invocation command line was
$ ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --
libdir=/usr/lib --build=x86_64-host-linux-gnu --host=arm-v5te-linux-gnueabi --
enable-harden --enable-largefile --disable-zlib --disable-pam --enable-openpty
--enable-syslog --enable-shadow --disable-plugin --disable-fuzz --enable-
bundled-libtom --disable-lastlog --disable-utmp --disable-utmpx --disable-wtmp
--disable-wtmpx --disable-loginfunc --disable-pututline --disable-pututxline
And localoptions.h was set to this:
/* localoptions.h created by ptxdist */
#define DROPBEAR_X11FWD 0
#define DROPBEAR_CLI_LOCALTCPFWD 1
#define DROPBEAR_CLI_REMOTETCPFWD 1
#define DROPBEAR_SVR_LOCALTCPFWD 1
#define DROPBEAR_SVR_REMOTETCPFWD 1
#define DROPBEAR_SVR_AGENTFWD 0
#define DROPBEAR_CLI_AGENTFWD 0
#define DROPBEAR_AES128 1
#define DROPBEAR_3DES 0
#define DROPBEAR_AES256 1
#define DROPBEAR_ENABLE_CBC_MODE 0
#define DROPBEAR_ENABLE_CTR_MODE 1
#define DROPBEAR_SHA1_HMAC 0
#define DROPBEAR_DH_GROUP1 0
#define DROPBEAR_DH_GROUP14_SHA1 0
#define DROPBEAR_SHA1_96_HMAC 0
#define DROPBEAR_SHA2_256_HMAC 1
#define DROPBEAR_SHA2_512_HMAC 1
#define DROPBEAR_DSS 0
#define DROPBEAR_RSA 1
#define DROPBEAR_ECDSA 0
#define DROPBEAR_ECDH 0
#define DROPBEAR_CURVE25519 0
#define DROPBEAR_SVR_PASSWORD_AUTH 1
#define DROPBEAR_CLI_PASSWORD_AUTH 1
#define DROPBEAR_SVR_PUBKEY_AUTH 1
#define DROPBEAR_CLI_PUBKEY_AUTH 1
The compile error is like this:
arm-v5te-linux-gnueabi-gcc -c -Os -W -Wall -Wno-pointer-sign -fno-strict-
overflow -fPIE -fstack-protector-strong -D_FORTIFY_SOURCE=2 -I./libtomcrypt/
src/headers/ -DLOCALOPTIONS_H_EXISTS -I. -I. -DDROPBEAR_SERVER -
DDROPBEAR_CLIENT signkey.c -o signkey.o
In file included from signkey.c:31:0:
sk-ecdsa.h:11:44: error: unknown type name 'ecc_key'
signkey.c: In function 'buf_get_pub_key':
signkey.c:318:17: error: 'DROPBEAR_SIGNKEY_SK_ECDSA_NISTP256' undeclared
(first use in this function)
signkey.c:318:17: note: each undeclared identifier is reported only once for
each function it appears in
signkey.c: In function 'buf_verify':
signkey.c:688:17: error: 'DROPBEAR_SIGNKEY_SK_ECDSA_NISTP256' undeclared
(first use in this function)
signkey.c:689:3: error: unknown type name 'ecc_key'
signkey.c:689:20: error: 'ecc_key' undeclared (first use in this function)
signkey.c:689:29: error: expected expression before ')' token
make[1]: *** [Makefile:154: signkey.o] Error 1
I looked into the dropbear code, and sk-ecdsa.h includes "includes.h" which
itself includes "tomcrypt.h" and in some file of that 'ecc_key' is defined, so
I don't know why the compiler complains here.
Did not look into the other errors however.
Any ideas?
I think the problem occurs when DROPBEAR_SK_ECDSA is 1 and
DROPBEAR_ECDSA is 0. The upstream maintainers can determine whether
this combination should be supported or not.
The ptxdist rules for dropbear 2020.81 (the current version in ptxdist)
did not configure DROPBEAR_SK_ECDSA in "localoptions.h", so
DROPBEAR_SK_ECDSA gets defined with the default value 1 in
"default_options_guard.h" (generated from "default_options.h").
As a temporary measure, you can change ptxdist's "dropbear.make" to
forcibly configure DROPBEAR_SK_ECDSA to 0 by adding these lines in the
appropriate place before the `@$(call touch)` line in the
`$(STATEDIR)/dropbear.prepare` rules:
@echo "ptxdist: disabling sk_ecdsa"
@echo "#define DROPBEAR_SK_ECDSA 0" >> $(DROPBEAR_LOCALOPTIONS)
You could also add these lines to forcibly configure DROPBEAR_SK_ED25519
to 0 (not needed to fix the build, but it should reduce the executable
size):
@echo "ptxdist: disabling sk_ed25519"
@echo "#define DROPBEAR_SK_ED25519 0" >> $(DROPBEAR_LOCALOPTIONS)
(Ideally, extra configuration options for the new features should be
added to ptxdist's "dropbear.in", and should automatically select
DROPBEAR_ECDSA when DROPBEAR_SK_ECDSA is configured.)
Alternatively, you could just select the DROPBEAR_ECSDA option in the
configuration anyway, but that will increase the size of the dropbear
executable.
--
-=( Ian Abbott <[email protected]> || MEV Ltd. is a company )=-
-=( registered in England & Wales. Regd. number: 02862268. )=-
-=( Regd. addr.: S11 & 12 Building 67, Europa Business Park, )=-
-=( Bird Hall Lane, STOCKPORT, SK3 0XA, UK. || www.mev.co.uk )=-
