On Fri, Feb 10, 2023 at 12:23:39PM +0100, Christian Melki wrote:
> On 2/10/23 12:17 PM, Michael Olbrich wrote:
> > On Wed, Feb 08, 2023 at 10:42:50AM +0100, Christian Melki wrote:
> > > Very minor bugfix release.
> > > https://github.com/libsdl-org/SDL_ttf/releases/tag/release-2.20.2
> > > Also do some fixes. As the configuration was very non-complete.
> > > This should help reduce footprint if needed.
> > > Ptxdist had freetype dependencies, although sdl2-ttf was using
> > > the internal library.
> > > 
> > > * License file copyright year changed.
> > > * Move patchset forward, applies cleanly.
> > > * Add option to control if the mandatory freetype library should
> > > be external (otherwise it must use the internal one).
> > > * Add option to enable optional harfbuzz.
> > > * Add option to enable internal harfbuzz if support is enabled.
> > > * Make the options default reflect the old behavior.
> > > Ie, internal freetype and harfbuzz as default.
> > > * Disable the freetypetest tool.
> > > 
> > > Signed-off-by: Christian Melki <[email protected]>
> > > ---
> > >   ...igure-make-opengl-support-switchable.patch |  0
> > >   .../autogen.sh                                |  0
> > >   .../series                                    |  0
> > >   rules/sdl2-ttf.in                             | 46 +++++++++++++++++--
> > >   rules/sdl2-ttf.make                           | 10 ++--
> > >   5 files changed, 50 insertions(+), 6 deletions(-)
> > >   rename patches/{SDL2_ttf-2.20.1 => 
> > > SDL2_ttf-2.20.2}/0001-configure-make-opengl-support-switchable.patch 
> > > (100%)
> > >   rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/autogen.sh (100%)
> > >   rename patches/{SDL2_ttf-2.20.1 => SDL2_ttf-2.20.2}/series (100%)
> > > 
> > > diff --git 
> > > a/patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> > >  
> > > b/patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
> > > similarity index 100%
> > > rename from 
> > > patches/SDL2_ttf-2.20.1/0001-configure-make-opengl-support-switchable.patch
> > > rename to 
> > > patches/SDL2_ttf-2.20.2/0001-configure-make-opengl-support-switchable.patch
> > > diff --git a/patches/SDL2_ttf-2.20.1/autogen.sh 
> > > b/patches/SDL2_ttf-2.20.2/autogen.sh
> > > similarity index 100%
> > > rename from patches/SDL2_ttf-2.20.1/autogen.sh
> > > rename to patches/SDL2_ttf-2.20.2/autogen.sh
> > > diff --git a/patches/SDL2_ttf-2.20.1/series 
> > > b/patches/SDL2_ttf-2.20.2/series
> > > similarity index 100%
> > > rename from patches/SDL2_ttf-2.20.1/series
> > > rename to patches/SDL2_ttf-2.20.2/series
> > > diff --git a/rules/sdl2-ttf.in b/rules/sdl2-ttf.in
> > > index a14676933..fb68fd5a0 100644
> > > --- a/rules/sdl2-ttf.in
> > > +++ b/rules/sdl2-ttf.in
> > > @@ -1,12 +1,52 @@
> > >   ## SECTION=multimedia_sdl
> > > -config SDL2_TTF
> > > +menuconfig SDL2_TTF
> > >           tristate
> > >           select SDL2
> > > - select FREETYPE
> > > - prompt "SDL2 ttf"
> > > + select FREETYPE if SDL2_TTF_EXTERNAL_FREETYPE
> > > + select HARFBUZZ if SDL2_TTF_EXTERNAL_HARFBUZZ
> > > + prompt "SDL2 ttf                      "
> > >           help
> > >             This is a sample library which allows you to use TrueType
> > >             fonts in your SDL applications. It comes with an example
> > >             program "showfont" which displays an example string for a
> > >             given TrueType font file.
> > > +
> > > +if SDL2_TTF
> > > +
> > > +config SDL2_TTF_EXTERNAL_FREETYPE
> > > + bool
> > > + prompt "enable external freetype support"
> > > + help
> > > +   Freetype is mandatory for SDL2-ttf.
> > > +   And it has a version of freetype built in.
> > > +   To reduce code footprint, there is an option
> > > +   to use an external freetype library.
> > > +   Probably not as well tested against different
> > > +   versions of freetype as the internal one.
> > > +
> > > +config SDL2_TTF_HARFBUZZ
> > > + bool
> > > + prompt "enable harfbuzz support"
> > > + default y
> > > + help
> > > +   Harfbuzz is optional for SDL2-ttf.
> > > +   However, it has a version of harfbuzz built in.
> > > +   To reduce code footprint, there is an option
> > > +   to disable harfbuzz altogheter.
> > > +
> > > +if SDL2_TTF_HARFBUZZ
> > > +
> > > +config SDL2_TTF_EXTERNAL_HARFBUZZ
> > > + bool
> > > + prompt "enable external harfbuzz support"
> > > + help
> > > +   Use this option to build with an external
> > > +   harfbuzz library.
> > > +   Much like the external freetype option,
> > > +   this can be used to reduce footprint by
> > > +   deduplicating library use.
> > 
> > Hmmm, I would prefer to always us the system libraries or none at all, or
> > are there good reasons to use the built-in versions?
> > 
> > Michael
> > 
> 
> Guess none, beside compatibility? Relying on old broken behavior etc?
> I've built it with the options set for external though. Seems ok.
> Maybe the harfbuzz/freetype circular dependency made the project carry it's 
> own implementation?
> 
> And I agree, but refrained from changing the default behavior.
> The duplication bugged be a bit when I stumbled upon it though.

I'm pretty sure, the old behaviour was just accidental. So always use the
system libraries please, with just one option to make harfbuzz optional.

Michael

> > > +
> > > +endif
> > > +
> > > +endif
> > > diff --git a/rules/sdl2-ttf.make b/rules/sdl2-ttf.make
> > > index beaad3992..724e26ed6 100644
> > > --- a/rules/sdl2-ttf.make
> > > +++ b/rules/sdl2-ttf.make
> > > @@ -14,8 +14,8 @@ PACKAGES-$(PTXCONF_SDL2_TTF) += sdl2-ttf
> > >   #
> > >   # Paths and names
> > >   #
> > > -SDL2_TTF_VERSION := 2.20.1
> > > -SDL2_TTF_MD5             := 746be429bdfb5892066dcfaf593e1644
> > > +SDL2_TTF_VERSION := 2.20.2
> > > +SDL2_TTF_MD5             := 4815838c87410346226983f4e0a85fd4
> > >   SDL2_TTF                := SDL2_ttf-$(SDL2_TTF_VERSION)
> > >   SDL2_TTF_SUFFIX         := tar.gz
> > >   SDL2_TTF_URL            := 
> > > https://www.libsdl.org/projects/SDL_ttf/release/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> > > @@ -23,7 +23,7 @@ SDL2_TTF_SOURCE         := 
> > > $(SRCDIR)/$(SDL2_TTF).$(SDL2_TTF_SUFFIX)
> > >   SDL2_TTF_DIR            := $(BUILDDIR)/$(SDL2_TTF)
> > >   SDL2_TTF_LICENSE        := zlib
> > >   SDL2_TTF_LICENSE_FILES  := \
> > > - file://LICENSE.txt;md5=771dca8728b18d39b130e19b36514371
> > > + file://LICENSE.txt;md5=a41cbf59bdea749fe34c1af6d3615f68
> > >   # 
> > > ----------------------------------------------------------------------------
> > >   # Prepare
> > > @@ -33,6 +33,10 @@ SDL2_TTF_CONF_TOOL     := autoconf
> > >   SDL2_TTF_CONF_OPT       := \
> > >           $(CROSS_AUTOCONF_USR) \
> > >           $(GLOBAL_LARGE_FILE_OPTION) \
> > > + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_FREETYPE)-freetype-builtin 
> > > \
> > > + --disable-freetypetest \
> > > + --$(call ptx/endis,PTXCONF_SDL2_TTF_HARFBUZZ)-harfbuzz \
> > > + --$(call ptx/disen,PTXCONF_SDL2_TTF_EXTERNAL_HARFBUZZ)-harfbuzz-builtin 
> > > \
> > >           --disable-sdltest
> > >   ifdef PTXCONF_SDL2_PULSEAUDIO
> > > -- 
> > > 2.34.1
> > > 
> > > 
> > > 
> > 
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Reply via email to