Thanks, applied as 3303094861b0ff0f2a560092cb59fde24de60cdd.

Michael

[sent from post-receive hook]

On Mon, 18 May 2026 09:54:01 +0200, Thorsten Scherer <[email protected]> 
wrote:
> Signed-off-by: Thorsten Scherer <[email protected]>
> Message-Id: <[email protected]>
> Signed-off-by: Michael Olbrich <[email protected]>
> 
> diff --git a/rules/pcmciautils.in b/rules/pcmciautils.in
> deleted file mode 100644
> index e35ff2bfc92e..000000000000
> --- a/rules/pcmciautils.in
> +++ /dev/null
> @@ -1,39 +0,0 @@
> -## SECTION=staging
> -## old section:
> -### SECTION=shell_and_console
> -
> -menuconfig PCMCIAUTILS
> -     tristate
> -     prompt "pcmcia utils                  "
> -     select LIBSYSFS
> -     help
> -       PCMCIAutils contains hotplug scripts and initialization tools
> -       necessary to allow the PCMCIA subsystem to behave (almost) as
> -       every other hotpluggable bus system (e.g. USB, IEEE1394).
> -       Please note that the kernel support for this new feature is only
> -       present since 2.6.13-rc1. Also, you need sysfsutils 1.3.0 and
> -       module-init-tools 3.2-pre4 or later.
> -       (see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
> -        and http://www.kernel.org/pub/linux/utils/kernel/pcmcia/howto.html)
> -
> -       STAGING: remove in PTXdist 2026.03.0
> -       Unmaintained in PTXdist, upstream dead and fails to build with
> -       current toolchains.
> -
> -if PCMCIAUTILS
> -
> -config PCMCIAUTILS_STARTUP
> -     bool
> -     prompt "Support dynamic sockets (STARTUP, PCCARD_NONSTATIC)"
> -     help
> -       If this is enabled some more programs are built and installed to allow
> -       hotplugging of the pcmcia socket itself.
> -       "You don't need it if the socket driver does not select
> -       PCCARD_NONSTATIC -- that is the case for many embedded systems --
> -       and for yenta_socket if the cardbus bridge is either below a
> -       PCI-PCI bridge, or where the PCI bus is not equivalent to the host
> -       bus (e.g. on PPC)"
> -       (see http://www.kernel.org/pub/linux/utils/kernel/pcmcia/pcmcia.html
> -        and http://www.kernel.org/pub/linux/utils/kernel/pcmcia/howto.html)
> -
> -endif
> diff --git a/rules/pcmciautils.make b/rules/pcmciautils.make
> deleted file mode 100644
> index dcdd342d55de..000000000000
> --- a/rules/pcmciautils.make
> +++ /dev/null
> @@ -1,82 +0,0 @@
> -# -*-makefile-*-
> -#
> -# Copyright (C) 2005 by Steven Scholz <[email protected]>
> -#               2009 by Marc Kleine-Budde <[email protected]>
> -#
> -# For further information about the PTXdist project and license conditions
> -# see the README file.
> -#
> -
> -#
> -# We provide this package
> -#
> -PACKAGES-$(PTXCONF_PCMCIAUTILS) += pcmciautils
> -
> -#
> -# Paths and names
> -#
> -PCMCIAUTILS_VERSION  := 017
> -PCMCIAUTILS_MD5              := ee5837214d297661c8b8189055a351fc
> -PCMCIAUTILS          := pcmciautils-$(PCMCIAUTILS_VERSION)
> -PCMCIAUTILS_SUFFIX   := tar.gz
> -PCMCIAUTILS_URL              := $(call ptx/mirror, KERNEL, 
> utils/kernel/pcmcia/$(PCMCIAUTILS).$(PCMCIAUTILS_SUFFIX))
> -PCMCIAUTILS_SOURCE   := $(SRCDIR)/$(PCMCIAUTILS).$(PCMCIAUTILS_SUFFIX)
> -PCMCIAUTILS_DIR              := $(BUILDDIR)/$(PCMCIAUTILS)
> -
> -# 
> ----------------------------------------------------------------------------
> -# Prepare
> -# 
> ----------------------------------------------------------------------------
> -
> -PCMCIAUTILS_MAKE_ENV := \
> -     $(CROSS_ENV_CFLAGS) \
> -     $(CROSS_ENV_CPPFLAGS) \
> -     $(CROSS_ENV_LDFLAGS)
> -
> -PCMCIAUTILS_MAKE_OPT := \
> -     prefix=/usr \
> -     mandir=/usr/share/man \
> -     CROSS=$(COMPILER_PREFIX) \
> -     V=1 \
> -     STRIP=echo \
> -     $(call ptx/ifdef, PTXCONF_PCMCIAUTILS_STARTUP, STARTUP=true, 
> STARTUP=false)
> -
> -PCMCIAUTILS_INSTALL_OPT := \
> -     $(PCMCIAUTILS_MAKE_OPT) \
> -     install
> -
> -PCMCIAUTILS_MAKE_PAR := NO
> -
> -$(STATEDIR)/pcmciautils.prepare:
> -     @$(call targetinfo)
> -     @$(call touch)
> -
> -# 
> ----------------------------------------------------------------------------
> -# Target-Install
> -# 
> ----------------------------------------------------------------------------
> -
> -$(STATEDIR)/pcmciautils.targetinstall:
> -     @$(call targetinfo)
> -
> -     @$(call install_init, pcmciautils)
> -     @$(call install_fixup, pcmciautils,PRIORITY,optional)
> -     @$(call install_fixup, pcmciautils,SECTION,base)
> -     @$(call install_fixup, pcmciautils,AUTHOR,"Robert Schwebel 
> <[email protected]>")
> -     @$(call install_fixup, pcmciautils,DESCRIPTION,missing)
> -
> -#    # install-tools
> -     @$(call install_copy, pcmciautils, 0, 0, 0755, -, \
> -             /usr/sbin/pccardctl);
> -     @$(call install_link, pcmciautils, pccardctl, /usr/sbin/lspcmcia)
> -
> -     @$(call install_copy, pcmciautils, 0, 0, 0755, -, \
> -             /usr/lib/udev/pcmcia-check-broken-cis);
> -
> -ifdef PTXCONF_PCMCIAUTILS_STARTUP
> -#    # install-socket-tools
> -     @$(call install_copy, pcmciautils, 0, 0, 0755, -, \
> -             /usr/lib/udev/pcmcia-socket-startup);
> -endif
> -     @$(call install_finish, pcmciautils)
> -     @$(call touch)
> -
> -# vim: syntax=make

Reply via email to