On Tue, Mar 05, 2013 at 05:19:35AM -0800, Henri Jubin wrote: > Hello, > I installed pulp v2 as described in the documention.
greetings, what doc links did you follow, this one: http://pulp-user-guide.readthedocs.org/en/pulp-2.0/ or something else? reason I ask is I have run through those instructions a few times and I ended up with working setups. > I was able to create a consumer from the client side as described here: < consumer details clipped > > > > I think a got a messup with the certificate and the documentation does > not look working properly as i followed from top to botton and it does > not work. Can somebody point me to a doc with the inter relation with > the certificates or tell me how to set it. > > Thanks > Henri What FQDN do you have for the pulp server cert? did you set the hostname in the [server] section in /etc/pulp/server.conf or did you stick with the default (primary FQDN for the machine)? and what is the "host" setting under [server] in /etc/pulp/consumer/consumer.conf? And if you pull the cert being served up does that name match? you can use something along the lines of this to pull it: openssl s_client -connect <your server>:443 | openssl x509 -noout -text | grep Subject (you will need to ctrl-c the command to end it) the CN= filed shows the common name and should match what is in your configs above. also, are the times in sync between the two machines? Steve P.S. I'm a pulp user who did a lot of installs during pulp v2 beta to help test the release _______________________________________________ Pulp-list mailing list [email protected] https://www.redhat.com/mailman/listinfo/pulp-list
