Thanks Mike! I’ll try that. I hadn’t tried the other way yet. From: Mike DePaulo [mailto:[email protected]] Sent: March 24, 2021 2:30 PM To: Briand, Sheldon <[email protected]> Cc: Brian Bouterse <[email protected]>; David Davis <[email protected]>; [email protected] Subject: Re: [Pulp-list] using ansible to install azure backend
***ATTENTION*** This email originated from outside of the NRC. ***ATTENTION*** Ce courriel provient de l'extérieur du CNRC Hi Sheldon, FYI: A better solution in the meantime is to run the installer with the following variable set: prereq_pip_packages: - Jinja2 - django-storages[azure] The current installer docs incorrectly document prereq_pip_packages, so I just submitted a PR<https://github.com/pulp/pulp_installer/pull/566> to correct them. I also wrote up a task for us to implement a better way of installing it into the installer. (Also to document usage variables in the installer docs.) https://pulp.plan.io/issues/8446 -Mike On Wed, Mar 24, 2021 at 12:27 PM Briand, Sheldon <[email protected]<mailto:[email protected]>> wrote: Hi Brian, Thanks for your reply. I will try doing it manually using the pip environment and let everyone know how it goes. -Sheldon From: Brian Bouterse [mailto:[email protected]<mailto:[email protected]>] Sent: March 24, 2021 1:14 PM To: David Davis <[email protected]<mailto:[email protected]>> Cc: Briand, Sheldon <[email protected]<mailto:[email protected]>>; [email protected]<mailto:[email protected]> Subject: Re: [Pulp-list] using ansible to install azure backend ***ATTENTION*** This email originated from outside of the NRC. ***ATTENTION*** Ce courriel provient de l'extérieur du CNRC I agree with @daviddavis. I think the installer would benefit from docs on how to configure django-storages for S3 and Azure as basic examples. I think the process is roughly: 1) Make sure the pulpcore[azure] pip extras is installed in the virtualenv: https://github.com/pulp/pulpcore/blob/483abb5c4e8a048db4a8bd39f88c12617cf4b047/setup.py#L25-L30 2) Configure django-storages, which you can set via settings through the pulp_settings var entirely through the I believe (1) is not available in the installer today and I'm hoping @mikedep333 can reply about what can be done there. As a workaround you could install it manually into the virtualenv onto the target system, let us know if you want more info on that. On Wed, Mar 24, 2021 at 11:15 AM David Davis <[email protected]<mailto:[email protected]>> wrote: To clarify, you're talking about having to install the django-storages packages[0]? I don't know if this exists today in the installer (maybe someone from the pulp_installer team can confirm) but it would be great to have support for setting up pulp to use non-fs storage backends. With using pip, I think you just need to be sure you're using the pulp virtualenv that the installer creates ($ workon pulp). [0] https://docs.pulpproject.org/pulpcore/installation/storage.html#configuring-pulp David On Tue, Mar 23, 2021 at 9:55 AM Briand, Sheldon <[email protected]<mailto:[email protected]>> wrote: Hi, I see instructions for using pip to install storage back ends. I’m wondering if there is any way to install the storage back ends using ansible. If I have used ansible to install pulp3 are there any tricks (or dangers) I need to know when using pip to install the storage back ends? Thanks, -Sheldon _______________________________________________ Pulp-list mailing list [email protected]<mailto:[email protected]> https://listman.redhat.com/mailman/listinfo/pulp-list _______________________________________________ Pulp-list mailing list [email protected]<mailto:[email protected]> https://listman.redhat.com/mailman/listinfo/pulp-list _______________________________________________ Pulp-list mailing list [email protected]<mailto:[email protected]> https://listman.redhat.com/mailman/listinfo/pulp-list -- Mike DePaulo He / Him / His Service Reliability Engineer, Pulp Red Hat<https://www.redhat.com/> IM: mikedep333 GPG: 51745404 [Image removed by sender.]<https://www.redhat.com/>
_______________________________________________ Pulp-list mailing list [email protected] https://listman.redhat.com/mailman/listinfo/pulp-list
