https://bugs.freedesktop.org/show_bug.cgi?id=46236
--- Comment #8 from Raymond <[email protected]> --- ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Path analog-output-speaker (Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=87, min_dB=-130.5, max_dB=0 ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=3, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x6, n_channels=2, override_map=no ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, volume_limit=-1, enumeration=0, required=0, required_any=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Element PCM, direction=1, switch=1, volume=1, volume_limit=-1, enumeration=0, required=0, required_any=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Headphone, alsa_name='Headphone Jack', detection unavailable ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Front Headphone, alsa_name='Front Headphone Jack', detection possible ( 0.094| 0.000) D: [pulseaudio] alsa-mixer.c: Jack Speaker Phantom, alsa_name='Speaker Phantom Jack', detection possible ( 0.094| 0.000) I: [pulseaudio] alsa-sink.c: Successfully enabled deferred volume. ( 0.094| 0.000) I: [pulseaudio] alsa-sink.c: Hardware volume ranges from -130.50 dB to 0.00 dB. Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 but your onboard alc269vb only has 0 - 87 steps and stepsize 0x02 = 0.75dB dB range should be -(87 x 0.75)dB to 0dB Codec: Realtek ALC269VB Address: 0 AFG Function Id: 0x1 (unsol 1) Vendor Id: 0x10ec0269 No Modem Function Group found Default PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Default Amp-In caps: N/A Default Amp-Out caps: N/A GPIO: io=2, o=0, i=0, unsolicited=1, wake=0 IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out Device: name="ALC269VB Analog", type="Audio", device=0 Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x57 0x57] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0 Amp-Out vals: [0x57 0x57] Converter: stream=8, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
