https://bugs.freedesktop.org/show_bug.cgi?id=70865
--- Comment #12 from Raymond <superquad.vort...@gmail.com> --- With alsa there is a ""Simple mixer control 'Independent HP'" if set to * "Enable", sound is /only/ audible through the built-in speaker * "Disable", sound is /only/ audible through the connected headphone/line-out as pulseaudio only use device 0 for analog playback, when independent HP is on , HP is only used for alt analog device 2 (auto mute of speaker by headphone is disabled) when independent HP is off, HP is used by analog device 0 if your external speaker is always plugged into line out, do you mean you want the internal speaker only auto muted by headphone but not by line out ? APLAY **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: AD1884 Analog [AD1884 Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 2: AD1884 Alt Analog [AD1884 Alt Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 Node 0x03 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="AD1884 Alt Analog", type="Audio", device=2 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x27 0x27] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 Node 0x04 [Audio Output] wcaps 0x405: Stereo Amp-Out Control: name="PCM Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="AD1884 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x27, nsteps=0x27, stepsize=0x05, mute=0 Amp-Out vals: [0x27 0x27] Converter: stream=0, channel=0 Power states: D0 D3 Power: setting=D0, actual=D0 -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list pulseaudio-bugs@lists.freedesktop.org http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs