https://bugs.freedesktop.org/show_bug.cgi?id=54881
--- Comment #16 from Olivier Crête <[email protected]> --- The internal 17 oin onnector is connected to a panel that has 4 separate connections (which we "split" using pulse). And the internal SPDIF connector is also connected. I didn't setup the fw file, but I think it was to disable other things to prevent noise and enable those that are actually in use. In the UEFI menu, everything is either on "auto" or "enabled. When doing the aplay command without pulseaudio running, I get a bunch of underruns. I'm not sure why the s32le, or the 96000 sinks, it's the application creating those, and I don't have the source code to it right now. I'm not sure I followed everything, but I should rebuild pulse with DEBUG_TIMING and your patch and post the log? Here is the "firmware" file: # ASRock H61TM_ITX (Realtek ALC892) # Vendor Id, Subsystem Id, Address # See /proc/asound/card0/codec#0 [codec] 0x10ec0892 0x1849e892 0 # Prevent the AA-loopback from being enabled which can pull in white noise (ACI#380) [hint] mixer_nid = 0 # Disable everything except for: # 0x1e = Main S/PDIF # 0x1a = Output A (Front) # 0x16 = Output B (Center/LFE) # 0x15 = Output C (Rear) # 0x17 = Output D (Side) [pincfg] 0x11 0x40028008 0x12 0x40f000f0 0x14 0x40f000f0 0x15 0x01011012 0x16 0x01016011 0x17 0x01014413 0x18 0x40f000f0 0x19 0x40f000f0 0x1a 0x01014410 0x1b 0x40f000f0 0x1c 0x411111f0 0x1d 0x4037e629 0x1e 0x014b1180 And the matching pulse profile: [General] auto-profiles = no [Mapping analog-surround-71] device-strings = surround71:%f channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right description = Analog Surround 7.1 paths-output = analog-output priority = 100 direction = output [Mapping analog-stereo] description = Analog Stereo device-strings = front:%f hw:%f channel-map = left,right paths-output = analog-output priority = 90 direction = output [Mapping digital-stereo] device-strings = iec958:%f channel-map = left,right description = Digital Stereo paths-output = iec958-stereo-output priority = 50 direction = output [Mapping hdmi-stereo-7] device-strings = hw:%f,7 channel-map = left,right description = Digital Stereo (HDMI) paths-output = hdmi-output-1 priority = 40 direction = output [Profile output:analog-surround-71+output:digital-stereo+output:hdmi-stereo-7] description = ASRock output-mappings = analog-surround-71 digital-stereo hdmi-stereo-7 priority = 100 -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
