https://bugs.freedesktop.org/show_bug.cgi?id=90480
--- Comment #4 from Raymond <[email protected]> --- (In reply to Yan Pashkovsky from comment #0) > If I connect front panel sound jacks to my MB via HD Audio, not AC97 and > plug headphones to the front output - Pulseaudio will be randomly and fast > switch between front and rear inputs. > Sound card - Relatek, Pulseaudio 4.0, Linux Mint 17.1 > On Launchpad > https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/1067434 post the output of alsa-info.sh to debug unsol jack plug and unplug event, you need to enable tracepoint and find out how those pin get sense command were triggered https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/plain/Documentation/sound/alsa/HD-Audio.txt Tracepoints ~~~~~~~~~~~ The hd-audio driver gives a few basic tracepoints. `hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response` traces the response from RIRB (only when read from the codec driver). `hda:hda_bus_reset` traces the bus-reset due to fatal error, etc, `hda:hda_unsol_event` traces the unsolicited events, and `hda:hda_power_down` and `hda:hda_power_up` trace the power down/up via power-saving behavior. Enabling all tracepoints can be done like ------------------------------------------------------------------------ # echo 1 > /sys/kernel/debug/tracing/events/hda/enable ------------------------------------------------------------------------ then after some commands, you can traces from /sys/kernel/debug/tracing/trace file. For example, when you want to trace what codec command is sent, enable the tracepoint like: ------------------------------------------------------------------------ # cat /sys/kernel/debug/tracing/trace # tracer: nop # # TASK-PID CPU# TIMESTAMP FUNCTION # | | | | | <...>-7807 [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019 <...>-7807 [002] 105147.774893: hda_send_cmd: [0:0] val=e39019 <...>-7807 [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a <...>-7807 [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019 <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019 <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a https://git.kernel.org/cgit/linux/kernel/git/tiwai/sound.git/log/sound/pci/hda?qt=grep&q=tracepoint -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
