https://bugs.freedesktop.org/show_bug.cgi?id=42353
--- Comment #28 from Raymond <[email protected]> --- SERIAL CONFIGURATION REGISTER Index 0x74 D4 INTS Interrupt Mode Select This bit selects the JS interrupt implementation path. 0 = Bit 0 Slot 12 (modem interrupt). 1 = Slot 6 valid bit (MIC ADC interrupt). 2.2.9 GLOB_STA—Global Status Register (Audio—D30:F2) I/O Address: Default Value: Lockable: Bit 31:30Reserved. NABMBAR + 30h GPI Status Change Interrupt (GSCI) — R/WC. 0 =Software clears this bit by writing a 1 to it. 1 =This bit reflects the state of bit 0 in slot 12, and is set when bit 0 of slot 12 is set. This indicates that one of the GPI’s changed state, and that the new values are available in slot 12. This bit is not affected by AC ‘97 Audio Function D3HOT to D0 Reset. -- You are receiving this mail because: You are the QA Contact for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
