https://bugs.freedesktop.org/show_bug.cgi?id=93163
--- Comment #2 from Christian Vogel <[email protected]> --- Yes, if I configure it manually, then I have set all except the first two channels mapped to aux<0..N>. Here's what I came up with for udev-detect so that I can at least use the card for stereo outputs, for actual audio work I wouldn't use pulseaudio anyway. ➜ /etc/udev/rules.d/99-pulseaudio-local.rules : : SUBSYSTEM!="sound", GOTO="pulseaudio_local_end" : ACTION!="change", GOTO="pulseaudio_local_end" : KERNEL!="card*", GOTO="pulseaudio_local_end" : SUBSYSTEMS=="usb", GOTO="pulseaudio_local_check_usb" : : LABEL="pulseaudio_local_check_usb" : : ## : # The Focusrite Scarlett 6i6 only runs as 12 playback and 6 capture channels! : # (mappable using the internal mixer) : # Bus 002 Device 004: ID 1235:8012 Focusrite-Novation Scarlett 6i6 : ## : ATTRS{idVendor}=="1235", ATTRS{idProduct}=="8012", ENV{PULSE_PROFILE_SET}="focusrite-scarlett-6i6.conf" : : LABEL="pulseaudio_local_end" ➜ /usr/share/pulseaudio/alsa-mixer/profile-sets/focusrite-scarlett-6i6.conf : ; Based on native-instruments-traktor-audio10.conf : : ; : ; Focusrite Scarlett 6i6 has 6 physical inputs/outputs : ; Inputs : ; 2x Microphone/Line on front : ; 2x Line on back : ; 2x S/PDIF coaxial on back : ; Outputs : ; 2x Headphone (Out1/2, Out 3/4) on front : ; 2x Line on back (Out 1..4) : ; 2x S/PDIF coaxial on back : ; : ; It's presented as a 6 input, 12 output interface to the PC, so : ; we have to create some mappings. Actual routing is configurable : ; in ALSA mixer. I prefer a 1:1 mapping to physical outputs. : ; : : [General] : auto-profiles = no : : [Mapping analog-out] : description = Analog Outputs : device-strings = hw:%f : channel-map = left,right,aux0,aux1,aux2,aux3,aux4,aux5,aux6,aux7,aux8,aux9 : : [Mapping analog-in] : description = Analog Inputs : device-strings = hw:%f : channel-map = left,right,aux0,aux1,aux2,aux3 : direction = input : : : [Profile output:analog-out+input:analog-in] : description = Analog Duplex : output-mappings = analog-out : input-mappings = analog-in : priority = 100 : skip-probe = yes : Unfortunately this whols "paths" thing is a undocumented overengineered mess, or so it seems. Any idea how to present this card as three separate In/Out/Duplex interfaces for Inout1/2, Input3/4 and Inout5/6? That would probably be the "perfect" solution for owners of this device.... -- You are receiving this mail because: You are the QA Contact for the bug. You are the assignee for the bug.
_______________________________________________ pulseaudio-bugs mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/pulseaudio-bugs
