Hi folks, I ran into some weird behaviour on this motherboard. First, alsa-info is here: http://alsa-project.org/db/?f=f48105f391d848b34b3779f27369130ca024f417
The weird behaviour is that the HDA card is picked up fine, but jack detection is broken on boot. However, this gets "fixed" after you run alsa-info. The before/after codec info is at: https://arunraghavan.net/temp/alsa-codecs-before.txt https://arunraghavan.net/temp/alsa-codecs-after.txt The key delta is: ---- @@ -133,24 +133,24 @@ Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Front Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Device: name="ALC892 Analog", type="Audio", device=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 - Amp-Out vals: [0x34 0x34] - Converter: stream=0, channel=0 + Amp-Out vals: [0x29 0x29] + Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS Power: setting=D0, actual=D0 Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Surround Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 - Amp-Out vals: [0x34 0x34] - Converter: stream=0, channel=0 + Amp-Out vals: [0x29 0x29] + Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS @@ -159,12 +159,12 @@ Control: name="Center Playback Volume", index=0, device=0 ControlAmp: chs=1, dir=Out, idx=0, ofs=0 Control: name="LFE Playback Volume", index=0, device=0 ControlAmp: chs=2, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 - Amp-Out vals: [0x34 0x34] - Converter: stream=0, channel=0 + Amp-Out vals: [0x29 0x29] + Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS @@ -172,11 +172,11 @@ Node 0x05 [Audio Output] wcaps 0x41d: Stereo Amp-Out Control: name="Headphone Playback Volume", index=0, device=0 ControlAmp: chs=3, dir=Out, idx=0, ofs=0 Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0 Amp-Out vals: [0x00 0x00] - Converter: stream=0, channel=0 + Converter: stream=5, channel=0 PCM: rates [0x560]: 44100 48000 96000 192000 bits [0xe]: 16 20 24 formats [0x1]: PCM Power states: D0 D1 D2 D3 EPSS ---- Any thoughts on what's changing that, and how this should be fixed? Cheers, Arun _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/pulseaudio-discuss
