2009/6/15 Colin Guthrie <[email protected]>:
> Well pulse doesn't parse the alsa config in any way, it just knows that the
> setup itself should be sane and standard things (like front:xx) should work
> and do a specific job etc. It's alsa's job to make sure these standard
> things actually work on all h/w.
OK, that makes sense, thanks for the clarification. I'll probably have
another crack at solving this in the next couple of days. So if
pavucontrol only shows the digital outputs (as described in the bug) I
guess that means that the front:xx output is not correctly or not at
all configured? The config file /usr/share/alsa/cards/ICE1712.conf
certainly has some blurb in there but it's quite minimal.
Here it is, just for your info and any hints you can give to help my tinkering:
ICE1712.pcm.front.0 {
@args [ CARD ]
@args.CARD {
type string
}
type route
ttable.0.0 1
ttable.1.1 1
slave.pcm {
type hw
card $CARD
}
}
Compared to the entry for the digital outputs, it's very brief.
Thanks, Chris.
_______________________________________________
pulseaudio-discuss mailing list
[email protected]
https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
