I've attached "pulseaudio --system -v" log. For surround51, it says: . . . I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Broken pipe I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Broken Pipe . . . I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: card.c: Created 0 "alsa_card.usb-Creative_Technology_Ltd_SB_X- Fi_Surround_5.1_Pro_000000N9-00-Pro" I: alsa-sink.c: Successfully opened device front:0. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:0 I: alsa-mixer.c: Unable to attach to mixer front:0: No existe el fichero o el directorio I: alsa-mixer.c: Successfully attached to mixer 'hw:0' I: sink.c: Created sink 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X- Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo" with sample spec s24le 2ch 96000Hz and channel map front-left,front-right . . .
Is there something I can do or is it a bug in pulseaudio?? Cheers, Aitor On Sunday 23 January 2011 10:30:51 Aitor Pazos wrote: > speaker-test -Dsurround51:0 -c 6 -t wav > works fine, all speakers work > > On Sunday 23 January 2011 00:14:26 Colin Guthrie wrote: > > 'Twas brillig, and Aitor Pazos at 22/01/11 23:15 did gyre and gimble: > > >> 1. Enable network support and use a GUI client on a non-headless > > >> system > > >> (e.g. PULSE_SERVER=<headless_ip> pavucontrol) and pick a 5.1 > > >> Configuration profile. > > > > > > That's convenient, but the problem is that no 5.1 Configuration > > > Profile > > > is listed > > > > > >> 2. Use "pacmd list-cards" to see a list of card profiles, then > > >> then > > >> use > > >> "pacmd set-card-profile idx profile" to set a 5.1 profile > > > > > > Same problem as in solution 1, no 5.1 profile listed. > > > > > >> 3. Set default-sample-channels=6 in /etc/pulse/daemon.conf > > > > > > I already did that with no effect. I've adjusted > > > default-sample-rate, > > > but > > > setting default-sample-channels has no effects. > > > > > > pacmd list-cards output: > > > profiles: > > > output:analog-stereo: Analog Stereo > > > Output (priority 1000) > > > output:analog-stereo+input:analog-st > > > ere > > > o: Analog Stereo Duplex > > > > > > (priority 1010) > > > > > > output:analog-stereo+input:iec958-st > > > ereo > > > > > > : Analog Stereo Output > > > > > > + Digital Stereo (IEC958) Input (priority 1005) > > > > > > output:iec958-stereo: Digital Stereo > > > Duplex (IEC958) (priority > > > > > > 500) > > > > > > output:iec958-stereo+input:analog-st > > > ereo > > > > > > : Digital Stereo > > > > > > (IEC958) Output + Analog Stereo Input (priority 510) > > > > > > output:iec958-stereo+input:iec958-st > > > ereo > > > > > > : Digital Stereo > > > > > > (IEC958) Output + Digital Stereo (IEC958) Input (priority 505) > > > > > > input:analog-stereo: Analog Stereo > > > Input > > > (priority 10) > > > input:iec958-stereo: Digital Stereo > > > (IEC958) Input (priority > > > > > > 5) > > > > > > off: Apagado (priority 0) > > > > > > active profile: > > > <output:analog-stereo+input:analog-stereo> > > > > Hmm, seems no surround profile is detected. > > > > We rely on ALSA to support this, but obviously surround51 or any other > > analogue surround system isn't working. > > > > I suggest you try to debug at the ALSA level using e.g. speaker-test -D > > surround51:0 -c 6 > > > > If the surround51 thing works, then PA should automatically see it. > > > > Col
W: main.c: Ejecutándose en modo de sistema, ¡pero no se ha configurado --disallow-exit! W: main.c: Ejecutándose en modo de sistema, ¡pero no se ha configurado --disallow-module-loading! N: main.c: Ejecutándose en modo de sistema, ¡desactivando forzadamente el modo SHM! N: main.c: Ejecutándose en modo de sistema, ¡desactivando forzadamente exit idle time! I: core-util.c: Successfully gained nice level -11. I: main.c: Se encontró el usuario 'pulse' (UID 118) y el grupo 'pulse' (GID 122). I: main.c: Se han liberado con éxitos los privilegios de root. I: main.c: Esto es PulseAudio 0.9.21-rebootstrapped-dirty I: main.c: El tamaño de la página es de 4096 bytes I: main.c: El ID de la máquina es 2aba7f318957ac66db2cec750000000c I: main.c: Utilizando directorio de tiempo de ejecución /var/run/pulse. I: main.c: Utilizando directorio de estado /var/lib/pulse. I: main.c: Utilizando directorio de módulos /usr/lib/pulse-0.9.21/modules. I: main.c: Ejecutándose en modo de sistema: yes W: main.c: Bien, o sea que está ejecutando PA en modo de sistema. Por favor entienda que, en general, no debería estar haciéndolo. W: main.c: Si insiste en seguir utilizando este modo, será debido a su propio accionar que las cosas no funcionen como se esperaba. W: main.c: Por favor lea http://pulseaudio.org/wiki/WhatIsWrongWithSystemMod para obtener una explicación acerca de por qué es una mala idea utilizar el modo sistema. I: main.c: ¡Existen cronómetros de alta resolución fresquitos y disponibles! ¡Bon appetit! I: cpu-arm.c: CPU flags: EDSP I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:surround40:0: Argumento inválido I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround41:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround50:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_PREPARE failed (-32) I: alsa-util.c: snd_pcm_hw_params failed: Tubería rota I: alsa-util.c: Failed to set hardware parameters on plug:surround51:0: Tubería rota I: (alsa-lib)pcm_params.c: Slave PCM not usable I: (alsa-lib)pcm_params.c: Slave PCM not usable I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argumento inválido I: (alsa-lib)pcm_params.c: Slave PCM not usable I: (alsa-lib)pcm_params.c: Slave PCM not usable I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argumento inválido I: (alsa-lib)pcm_params.c: Slave PCM not usable I: (alsa-lib)pcm_params.c: Slave PCM not usable I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argumento inválido I: (alsa-lib)pcm_params.c: Slave PCM not usable I: (alsa-lib)pcm_params.c: Slave PCM not usable I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argumento inválido I: (alsa-lib)pcm_params.c: Slave PCM not usable I: (alsa-lib)pcm_params.c: Slave PCM not usable I: alsa-util.c: Failed to set hardware parameters on plug:surround71:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)pcm.c: Unknown PCM a52:0 I: alsa-util.c: Error opening PCM device a52:0: No existe el fichero o el directorio I: (alsa-lib)conf.c: Unknown parameters 0 I: (alsa-lib)pcm.c: Unknown PCM hdmi:0 I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: (alsa-lib)conf.c: Unknown parameters 0 I: (alsa-lib)pcm.c: Unknown PCM hdmi:0 I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: (alsa-lib)conf.c: Unknown parameters 0 I: (alsa-lib)pcm.c: Unknown PCM hdmi:0 I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: (alsa-lib)conf.c: Unknown parameters 0 I: (alsa-lib)pcm.c: Unknown PCM hdmi:0 I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: (alsa-lib)conf.c: Unknown parameters 0 I: (alsa-lib)pcm.c: Unknown PCM hdmi:0 I: alsa-util.c: Error opening PCM device hdmi:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Argumento inválido I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Argumento inválido I: card.c: Created 0 "alsa_card.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" I: alsa-sink.c: Successfully opened device front:0. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:0 I: alsa-mixer.c: Unable to attach to mixer front:0: No existe el fichero o el directorio I: alsa-mixer.c: Successfully attached to mixer 'hw:0' I: sink.c: Created sink 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo" with sample spec s24le 2ch 96000Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "24" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "0" I: sink.c: alsa.card_name = "SB X-Fi Surround 5.1 Pro" I: sink.c: alsa.long_card_name = "Creative Technology Ltd SB X-Fi Surround 5.1 Pro at usb-orion-ehci.0-1.1, full " I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "platform-orion-ehci.0-usb-0:1.1:1.0" I: sink.c: sysfs.path = "/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/sound/card0" I: sink.c: udev.id = "usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "041e" I: sink.c: device.vendor.name = "Creative Technology, Ltd" I: sink.c: device.product.id = "30df" I: sink.c: device.product.name = "SB_X-Fi_Surround_5.1_Pro" I: sink.c: device.serial = "Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9" I: sink.c: device.string = "front:0" I: sink.c: device.buffering.buffer_size = "1048572" I: sink.c: device.buffering.fragment_size = "524286" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "SB_X-Fi_Surround_5.1_Pro Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB041e:30df" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo.monitor" with sample spec s24le 2ch 96000Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of SB_X-Fi_Surround_5.1_Pro Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "0" I: source.c: alsa.card_name = "SB X-Fi Surround 5.1 Pro" I: source.c: alsa.long_card_name = "Creative Technology Ltd SB X-Fi Surround 5.1 Pro at usb-orion-ehci.0-1.1, full " I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "platform-orion-ehci.0-usb-0:1.1:1.0" I: source.c: sysfs.path = "/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/sound/card0" I: source.c: udev.id = "usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "041e" I: source.c: device.vendor.name = "Creative Technology, Ltd" I: source.c: device.product.id = "30df" I: source.c: device.product.name = "SB_X-Fi_Surround_5.1_Pro" I: source.c: device.serial = "Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9" I: source.c: device.string = "0" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2,0 fragments of size 524286 bytes (910,22ms), buffer size is 1048572 bytes (1820,44ms) I: alsa-sink.c: Time scheduling watermark is 20,00ms I: alsa-sink.c: Hardware volume ranges from 0 to 255. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: alsa-source.c: Successfully opened device front:0. I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-source.c: Successfully enabled mmap() mode. I: alsa-source.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:0 I: alsa-mixer.c: Unable to attach to mixer front:0: No existe el fichero o el directorio I: alsa-mixer.c: Successfully attached to mixer 'hw:0' I: source.c: Created source 1 "alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo" with sample spec s24le 2ch 96000Hz and channel map front-left,front-right I: source.c: alsa.resolution_bits = "24" I: source.c: device.api = "alsa" I: source.c: device.class = "sound" I: source.c: alsa.class = "generic" I: source.c: alsa.subclass = "generic-mix" I: source.c: alsa.name = "USB Audio" I: source.c: alsa.id = "USB Audio" I: source.c: alsa.subdevice = "0" I: source.c: alsa.subdevice_name = "subdevice #0" I: source.c: alsa.device = "0" I: source.c: alsa.card = "0" I: source.c: alsa.card_name = "SB X-Fi Surround 5.1 Pro" I: source.c: alsa.long_card_name = "Creative Technology Ltd SB X-Fi Surround 5.1 Pro at usb-orion-ehci.0-1.1, full " I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "platform-orion-ehci.0-usb-0:1.1:1.0" I: source.c: sysfs.path = "/devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/sound/card0" I: source.c: udev.id = "usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "041e" I: source.c: device.vendor.name = "Creative Technology, Ltd" I: source.c: device.product.id = "30df" I: source.c: device.product.name = "SB_X-Fi_Surround_5.1_Pro" I: source.c: device.serial = "Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9" I: source.c: device.string = "front:0" I: source.c: device.buffering.buffer_size = "1048572" I: source.c: device.buffering.fragment_size = "524286" I: source.c: device.access_mode = "mmap+timer" I: source.c: device.profile.name = "analog-stereo" I: source.c: device.profile.description = "Analog Stereo" I: source.c: device.description = "SB_X-Fi_Surround_5.1_Pro Analog Stereo" I: source.c: alsa.mixer_name = "USB Mixer" I: source.c: alsa.components = "USB041e:30df" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-source.c: Using 2,0 fragments of size 524286 bytes (910,22ms), buffer size is 1048572 bytes (1820,44ms) I: alsa-source.c: Time scheduling watermark is 20,00ms I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: (alsa-lib)pcm_hw.c: SNDRV_PCM_IOCTL_START failed (-32) I: module.c: Loaded "module-alsa-card" (index: #0; argument: "device_id="0" name="usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" card_name="alsa_card.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/platform/orion-ehci.0/usb1/1-1/1-1.1/1-1.1:1.0/sound/card0 (alsa_card.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro) module loaded. I: module-udev-detect.c: Found 1 cards. I: module.c: Loaded "module-udev-detect" (index: #1; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #2; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #3; argument: ""). I: module-stream-restore.c: Sucessfully opened database file '/var/lib/pulse/2aba7f318957ac66db2cec750000000c-stream-volumes'. I: module.c: Loaded "module-stream-restore" (index: #4; argument: ""). I: module-device-restore.c: Sucessfully opened database file '/var/lib/pulse/2aba7f318957ac66db2cec750000000c-device-volumes'. I: module.c: Loaded "module-device-restore" (index: #5; argument: ""). I: module-default-device-restore.c: Restored default sink 'alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo'. I: module-default-device-restore.c: Restored default source 'alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo'. I: module.c: Loaded "module-default-device-restore" (index: #6; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #7; argument: ""). I: module.c: Loaded "module-always-sink" (index: #8; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #9; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #10; argument: ""). I: module.c: Loaded "module-esound-protocol-tcp" (index: #11; argument: "auth-anonymous=1 auth-ip-acl=xxx.xxx.xxx.0/24;127.0.0.0/8 "). I: module.c: Loaded "module-native-protocol-tcp" (index: #12; argument: "auth-anonymous=1 auth-ip-acl=xxx.xxx.xxx.0/24;127.0.0.0/8"). I: module.c: Loaded "module-zeroconf-publish" (index: #13; argument: ""). I: module.c: Loaded "module-rtp-recv" (index: #14; argument: ""). I: main.c: El demonio se inició completamente. I: module-zeroconf-publish.c: Successfully established service pulse@foo: SB_X-Fi_Surround_5.1_Pro Analog Ster. I: module-zeroconf-publish.c: Successfully established service pulse@foo: SB_X-Fi_Surround_5.1_Pro Analog Ster. I: module-zeroconf-publish.c: Successfully established main service. I: socket-server.c: TCP connection accepted by tcpwrap. I: client.c: Created 0 "Native client (TCP/IP client from xxx.xxx.xxx.xxx:32982)" I: protocol-native.c: Client authenticated anonymously. I: socket-server.c: TCP connection accepted by tcpwrap. I: client.c: Created 1 "Native client (TCP/IP client from xxx.xxx.xxx.xxx:32983)" I: protocol-native.c: Client authenticated anonymously. I: module-stream-restore.c: Restoring volume for sink input sink-input-by-media-role:abstract. I: sink-input.c: Created input 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo for userX@hostY" on alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo with sample spec s24le 2ch 96000Hz and channel map front-left,front-right I: sink-input.c: media.name = "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo for userX@hostY" I: sink-input.c: media.role = "abstract" I: sink-input.c: application.name = "pulseaudio" I: sink-input.c: native-protocol.peer = "TCP/IP client from xxx.xxx.xxx.xxx:32982" I: sink-input.c: native-protocol.version = "16" I: sink-input.c: application.id = "org.PulseAudio.PulseAudio" I: sink-input.c: application.version = "0.9.22" I: sink-input.c: application.process.id = "3221" I: sink-input.c: application.process.user = "userX" I: sink-input.c: application.process.host = "hostY" I: sink-input.c: application.process.binary = "pulseaudio" I: sink-input.c: application.language = "es_ES.UTF-8" I: sink-input.c: window.x11.display = ":0" I: sink-input.c: application.process.machine_id = "machine_id" I: sink-input.c: application.process.session_id = "machine_id-1295781026.20999-854815527" I: sink-input.c: module-stream-restore.id = "sink-input-by-media-role:abstract" I: protocol-native.c: Requested tlength=150,00 ms, minreq=25,00 ms I: protocol-native.c: Final latency 175,00 ms = 100,00 ms + 2*25,00 ms + 25,00 ms I: module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:abstract. I: source-output.c: Created output 0 "alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo for userX@hostY" on alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo with sample spec s24le 2ch 96000Hz and channel map front-left,front-right I: source-output.c: media.name = "alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo for userX@hostY" I: source-output.c: media.role = "abstract" I: source-output.c: application.name = "pulseaudio" I: source-output.c: native-protocol.peer = "TCP/IP client from xxx.xxx.xxx.xxx:32983" I: source-output.c: native-protocol.version = "16" I: source-output.c: application.id = "org.PulseAudio.PulseAudio" I: source-output.c: application.version = "0.9.22" I: source-output.c: application.process.id = "3221" I: source-output.c: application.process.user = "userX" I: source-output.c: application.process.host = "hostY" I: source-output.c: application.process.binary = "pulseaudio" I: source-output.c: application.language = "es_ES.UTF-8" I: source-output.c: window.x11.display = ":0" I: source-output.c: application.process.machine_id = "machine_id" I: source-output.c: application.process.session_id = "machine_id-1295781026.20999-854815527" I: source-output.c: module-stream-restore.id = "source-output-by-media-role:abstract" I: protocol-native.c: Final latency 50,00 ms = 25,00 ms + 25,00 ms I: module-stream-restore.c: Storing volume/mute/device for stream sink-input-by-media-role:abstract. I: module-suspend-on-idle.c: Sink alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo idle for too long, suspending ... I: alsa-sink.c: Device suspended... I: module-stream-restore.c: Synced. I: module-suspend-on-idle.c: Source alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo idle for too long, suspending ... I: alsa-source.c: Device suspended... I: main.c: Se obtuvo la señal SIGINT. I: main.c: Saliendo. I: main.c: Comienza a apagarse el demonio. I: module.c: Unloading "module-alsa-card" (index: #0). I: sink-input.c: Freeing input 0 "SB_X-Fi_Surround_5.1_Pro Analog Stereo for userX@hostY" I: sink.c: Freeing sink 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo.monitor" I: source-output.c: Freeing output 0 "SB_X-Fi_Surround_5.1_Pro Analog Stereo for userX@hostY" I: source.c: Freeing source 1 "alsa_input.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro.analog-stereo" I: card.c: Freed 0 "alsa_card.usb-Creative_Technology_Ltd_SB_X-Fi_Surround_5.1_Pro_000000N9-00-Pro" I: module.c: Unloaded "module-alsa-card" (index: #0). I: module.c: Unloading "module-udev-detect" (index: #1). I: module.c: Unloaded "module-udev-detect" (index: #1). I: module.c: Unloading "module-esound-protocol-unix" (index: #2). I: module.c: Unloaded "module-esound-protocol-unix" (index: #2). I: module.c: Unloading "module-native-protocol-unix" (index: #3). I: module.c: Unloaded "module-native-protocol-unix" (index: #3). I: module.c: Unloading "module-stream-restore" (index: #4). I: module.c: Unloaded "module-stream-restore" (index: #4). I: module.c: Unloading "module-device-restore" (index: #5). I: module.c: Unloaded "module-device-restore" (index: #5). I: module.c: Unloading "module-default-device-restore" (index: #6). I: module.c: Unloaded "module-default-device-restore" (index: #6). I: module.c: Unloading "module-rescue-streams" (index: #7). I: module.c: Unloaded "module-rescue-streams" (index: #7). I: module.c: Unloading "module-always-sink" (index: #8). I: module.c: Unloaded "module-always-sink" (index: #8). I: module.c: Unloading "module-suspend-on-idle" (index: #9). I: module.c: Unloaded "module-suspend-on-idle" (index: #9). I: module.c: Unloading "module-position-event-sounds" (index: #10). I: module.c: Unloaded "module-position-event-sounds" (index: #10). I: module.c: Unloading "module-esound-protocol-tcp" (index: #11). I: module.c: Unloaded "module-esound-protocol-tcp" (index: #11). I: module.c: Unloading "module-native-protocol-tcp" (index: #12). I: client.c: Freed 0 "pulseaudio" I: client.c: Freed 1 "pulseaudio" I: module.c: Unloaded "module-native-protocol-tcp" (index: #12). I: module.c: Unloading "module-zeroconf-publish" (index: #13). I: module.c: Unloaded "module-zeroconf-publish" (index: #13). I: module.c: Unloading "module-rtp-recv" (index: #14). I: module.c: Unloaded "module-rtp-recv" (index: #14). I: main.c: El demonio se ha apagado.
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@mail.0pointer.de https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
