'Twas brillig, and Tanu Kaskinen at 25/04/11 18:15 did gyre and gimble: > If 0.9.14 worked as you want, the switch to timer-based scheduling > probably caused the change in behavior. If this application is used only > on systems where you can dictate the pulseaudio daemon settings, then > adding "tsched=0" to the line in /etc/pulse/default.pa where > module-hal-detect is loaded may help.
I should also say that if it is timer-based scheduling that turns out to be the cause, then there have been lots of timing fixes committed in PA since 0.9.15 that may ultimately make your issue go away. (tho' if you really need fixed samples, then perhaps not...) 0.9.15 really is very old now, so unless you are completely restricted, I'd upgrade to the latest stable-queue (or at least 0.9.22). Col -- Colin Guthrie gmane(at)colin.guthr.ie http://colin.guthr.ie/ Day Job: Tribalogic Limited [http://www.tribalogic.net/] Open Source: Mageia Contributor [http://www.mageia.org/] PulseAudio Hacker [http://www.pulseaudio.org/] Trac Hacker [http://trac.edgewall.org/] _______________________________________________ pulseaudio-discuss mailing list pulseaudio-discuss@mail.0pointer.de https://tango.0pointer.de/mailman/listinfo/pulseaudio-discuss
