#540: module-ladspa-sink on 0.9.15 dies
---------------------+------------------------------------------------------
Reporter: nevion | Owner: lennart
Type: defect | Status: new
Priority: high | Milestone:
Component: daemon | Severity: normal
Resolution: | Keywords:
---------------------+------------------------------------------------------
Comment(by nevion):
{{{
Thread 3 (Thread 0x7fffedef7950 (LWP 28397)):
#0 0x00007ffff414c5d5 in ppoll () from /lib64/libc.so.6
No symbol table info available.
#1 0x00007ffff7b9bdf0 in pa_rtpoll_run (p=0x69c460, wait=true) at
pulsecore/rtpoll.c:413
ts = {tv_sec = 0, tv_nsec = 351493000}
i = <value optimized out>
r = <value optimized out>
timeout = {tv_sec = 0, tv_usec = 351493}
__func__ = "pa_rtpoll_run"
__PRETTY_FUNCTION__ = "pa_rtpoll_run"
#2 0x00007fffee9e000a in thread_func (userdata=<value optimized out>) at
modules/alsa/alsa-source.c:1206
ret = <value optimized out>
u = (struct userdata *) 0x69f340
revents = 0
__func__ = "thread_func"
__PRETTY_FUNCTION__ = "thread_func"
#3 0x00007ffff771a860 in internal_thread_func (userdata=0x6adf20) at
pulsecore/thread-posix.c:72
__func__ = "internal_thread_func"
__PRETTY_FUNCTION__ = "internal_thread_func"
#4 0x00007ffff43e2070 in start_thread () from /lib64/libpthread.so.0
No symbol table info available.
#5 0x00007ffff415510d in clone () from /lib64/libc.so.6
No symbol table info available.
#6 0x0000000000000000 in ?? ()
No symbol table info available.
Thread 2 (Thread 0x7fffee6f8950 (LWP 28396)):
#0 0x00007ffff40b4645 in raise () from /lib64/libc.so.6
No symbol table info available.
#1 0x00007ffff40b5c33 in abort () from /lib64/libc.so.6
---Type <return> to continue, or q <return> to quit---
No symbol table info available.
#2 0x00007ffff7bab748 in pa_sink_input_update_max_request (i=0x739020,
nbytes=65280) at pulsecore/sink-input.h:220
__func__ = "pa_sink_input_update_max_request"
__PRETTY_FUNCTION__ = "pa_sink_input_update_max_request"
#3 0x00007ffff7bac96f in pa_sink_set_max_request_within_thread
(s=0x69c820, max_request=<value optimized out>)
at pulsecore/sink.c:1932
state = (void *) 0xffffffffffffffff
#4 0x00007fffee9d7ef0 in update_sw_params (u=0x68fd70) at modules/alsa
/alsa-sink.c:771
avail_min = <value optimized out>
err = 0
__func__ = "update_sw_params"
__PRETTY_FUNCTION__ = "update_sw_params"
#5 0x00007fffee9da938 in sink_update_requested_latency_cb (s=0x69c820) at
modules/alsa/alsa-sink.c:1184
u = (struct userdata *) 0x68fd70
before = 12
__func__ = "sink_update_requested_latency_cb"
__PRETTY_FUNCTION__ = "sink_update_requested_latency_cb"
#6 0x00007ffff7bb33b1 in pa_sink_invalidate_requested_latency
(s=0x69c820) at pulsecore/sink.c:1961
state = (void *) 0x0
#7 0x00007ffff7bab3b1 in
pa_sink_input_set_requested_latency_within_thread (i=0x739020,
usec=18446744073709551615)
at pulsecore/sink-input.c:825
No locals.
#8 0x00007ffff7bb33b1 in pa_sink_invalidate_requested_latency
(s=0x70d130) at pulsecore/sink.c:1961
state = (void *) 0x0
#9 0x00007ffff7bb34f5 in pa_sink_set_latency_range_within_thread
(s=0x70d130, min_latency=500, max_latency=123356)
at pulsecore/sink.c:2048
state = (void *) 0xffffffffffffffff
__func__ = "pa_sink_set_latency_range_within_thread"
__PRETTY_FUNCTION__ = "pa_sink_set_latency_range_within_thread"
#10 0x00007ffff7bb3c78 in pa_sink_process_msg (o=0x69c820, code=<value
optimized out>, userdata=0x739020, offset=0,
chunk=<value optimized out>) at pulsecore/sink.c:1462
---Type <return> to continue, or q <return> to quit---
i = (pa_sink_input *) 0x739020
__func__ = "pa_sink_process_msg"
__PRETTY_FUNCTION__ = "pa_sink_process_msg"
#11 0x00007fffee9dab42 in sink_process_msg (o=0x69c820, code=0,
data=0x739020, offset=0, chunk=0x7fffee6f7e70)
at modules/alsa/alsa-sink.c:902
u = (struct userdata *) 0x68fd70
__func__ = "sink_process_msg"
__PRETTY_FUNCTION__ = "sink_process_msg"
#12 0x00007ffff7b9aa94 in asyncmsgq_read_work (i=0x6910c0) at
pulsecore/rtpoll.c:730
ret = <value optimized out>
object = (pa_msgobject *) 0x69c820
code = 0
data = (void *) 0x739020
chunk = {memblock = 0x0, index = 0, length = 0}
offset = 0
__func__ = "asyncmsgq_read_work"
__PRETTY_FUNCTION__ = "asyncmsgq_read_work"
#13 0x00007ffff7b9bcef in pa_rtpoll_run (p=0x68eee0, wait=true) at
pulsecore/rtpoll.c:341
k = <value optimized out>
i = (pa_rtpoll_item *) 0x6910c0
r = <value optimized out>
timeout = {tv_sec = 6876896, tv_usec = 140737349532467}
__func__ = "pa_rtpoll_run"
__PRETTY_FUNCTION__ = "pa_rtpoll_run"
#14 0x00007fffee9db445 in thread_func (userdata=<value optimized out>) at
modules/alsa/alsa-sink.c:1347
ret = 0
u = (struct userdata *) 0x68fd70
revents = 0
__func__ = "thread_func"
__PRETTY_FUNCTION__ = "thread_func"
#15 0x00007ffff771a860 in internal_thread_func (userdata=0x695450) at
pulsecore/thread-posix.c:72
---Type <return> to continue, or q <return> to quit---
__func__ = "internal_thread_func"
__PRETTY_FUNCTION__ = "internal_thread_func"
#16 0x00007ffff43e2070 in start_thread () from /lib64/libpthread.so.0
No symbol table info available.
#17 0x00007ffff415510d in clone () from /lib64/libc.so.6
No symbol table info available.
#18 0x0000000000000000 in ?? ()
No symbol table info available.
Thread 1 (Thread 0x7ffff7fc47d0 (LWP 28393)):
#0 0x00007ffff43e7c71 in sem_wait () from /lib64/libpthread.so.0
No symbol table info available.
#1 0x00007ffff771aa18 in pa_semaphore_wait (s=0x69cc60) at pulsecore
/semaphore-posix.c:63
ret = <value optimized out>
__func__ = "pa_semaphore_wait"
__PRETTY_FUNCTION__ = "pa_semaphore_wait"
#2 0x00007ffff7b7d477 in pa_asyncmsgq_send (a=0x658180, object=<value
optimized out>, code=<value optimized out>,
userdata=<value optimized out>, offset=<value optimized out>,
chunk=<value optimized out>)
at pulsecore/asyncmsgq.c:167
i = {code = 0, object = 0x69c820, userdata = 0x739020, free_cb =
0, offset = 0, memchunk = {memblock = 0x0,
index = 0, length = 0}, semaphore = 0x69cc60, ret = -1}
__func__ = "pa_asyncmsgq_send"
__PRETTY_FUNCTION__ = "pa_asyncmsgq_send"
#3 0x00007ffff7baa10b in pa_sink_input_put (i=0x739020) at pulsecore
/sink-input.c:530
state = <value optimized out>
__func__ = "pa_sink_input_put"
__PRETTY_FUNCTION__ = "pa_sink_input_put"
#4 0x00007fffebc9ec5b in module_ladspa_sink_LTX_pa__init (m=0x6c05f0) at
modules/module-ladspa-sink.c:754
ss = {format = PA_SAMPLE_FLOAT32LE, rate = 44100, channels = 6
'\006'}
map = {channels = 6 '\006', map = {PA_CHANNEL_POSITION_LEFT,
PA_CHANNEL_POSITION_RIGHT,
PA_CHANNEL_POSITION_REAR_LEFT, PA_CHANNEL_POSITION_REAR_RIGHT,
PA_CHANNEL_POSITION_CENTER,
---Type <return> to continue, or q <return> to quit---
PA_CHANNEL_POSITION_LFE, PA_CHANNEL_POSITION_MONO <repeats 26 times>}}
ma = (pa_modargs *) 0x6c16a0
z = <value optimized out>
master = (pa_sink *) 0x69c820
sink_input_data = {proplist = 0x7361c0, driver = 0x7fffebca080e
"modules/module-ladspa-sink.c",
module = 0x6c05f0, client = 0x0, sink = 0x69c820, resample_method = 12,
sync_base = 0x0, sample_spec = {
format = PA_SAMPLE_FLOAT32LE, rate = 44100, channels = 6 '\006'},
channel_map = {channels = 6 '\006', map = {
PA_CHANNEL_POSITION_LEFT, PA_CHANNEL_POSITION_RIGHT,
PA_CHANNEL_POSITION_REAR_LEFT,
PA_CHANNEL_POSITION_REAR_RIGHT, PA_CHANNEL_POSITION_CENTER,
PA_CHANNEL_POSITION_LFE,
PA_CHANNEL_POSITION_MONO <repeats 26 times>}}, volume = {channels =
6 '\006', values = {65536, 65536, 65536,
65536, 65536, 65536, 0 <repeats 26 times>}}, volume_factor =
{channels = 6 '\006', values = {65536, 65536,
65536, 65536, 65536, 65536, 0 <repeats 26 times>}}, muted = false,
sample_spec_is_set = true,
channel_map_is_set = true, volume_is_set = false, volume_factor_is_set =
false, muted_is_set = false,
volume_is_absolute = false, save_sink = false, save_volume = false,
save_muted = false}
sink_data = {name = 0x6f1970 "\020\027o", proplist = 0x709c40,
driver = 0x7fffebca080e "modules/module-ladspa-sink.c", module =
0x6c05f0, card = 0x0, sample_spec = {
format = PA_SAMPLE_FLOAT32LE, rate = 44100, channels = 6 '\006'},
channel_map = {channels = 6 '\006', map = {
PA_CHANNEL_POSITION_LEFT, PA_CHANNEL_POSITION_RIGHT,
PA_CHANNEL_POSITION_REAR_LEFT,
PA_CHANNEL_POSITION_REAR_RIGHT, PA_CHANNEL_POSITION_CENTER,
PA_CHANNEL_POSITION_LFE,
PA_CHANNEL_POSITION_MONO <repeats 26 times>}}, volume = {channels =
6 '\006', values = {65536, 65536, 65536,
65536, 65536, 65536, 0 <repeats 26 times>}}, muted = false,
sample_spec_is_set = true,
channel_map_is_set = true, volume_is_set = true, muted_is_set = true,
namereg_fail = false}
plugin = 0x6c1ad0 "mbeq_1197"
label = 0x6c1b70 "mbeq"
descriptor_func = <value optimized out>
e = <value optimized out>
cdata = 0x6c1c10 "-1000,-10,0,0,0,0,0,0,0,0,0,0,0,0,0"
d = (const LADSPA_Descriptor *) 0x6c2dd0
input_port = 18
output_port = <value optimized out>
p = 18
---Type <return> to continue, or q <return> to quit---
j = <value optimized out>
n_control = 15
c = 7085296
use_default = (pa_bool_t *) 0x6e9fb0
__func__ = "module_ladspa_sink_LTX_pa__init"
__PRETTY_FUNCTION__ = "module_ladspa_sink_LTX_pa__init"
#5 0x00007ffff7b931d8 in pa_module_load (c=0x61c1b0, name=0x631010
"module-ladspa-sink",
argument=0x651990 "sink_name=ladspa_out
master=alsa_output.pci_8086_3a3e_sound_card_0 plugin=mbeq_1197 label=mbeq
control=-1000,-10,0,0,0,0,0,0,0,0,0,0,0,0,0") at pulsecore/module.c:103
m = (pa_module *) 0x6c05f0
mi = <value optimized out>
__func__ = "pa_module_load"
__PRETTY_FUNCTION__ = "pa_module_load"
#6 0x00007ffff7b85b9a in pa_cli_command_load (c=0x61c1b0, t=0x619860,
buf=0x619ad0, fail=<value optimized out>)
at pulsecore/cli-command.c:422
name = <value optimized out>
__func__ = "pa_cli_command_load"
__PRETTY_FUNCTION__ = "pa_cli_command_load"
#7 0x00007ffff7b7f0b4 in pa_cli_command_execute_line_stateful
(c=0x61c1b0, s=<value optimized out>, buf=0x619ad0,
fail=0x618af5, ifstate=<value optimized out>) at pulsecore/cli-
command.c:1674
ret = <value optimized out>
t = <value optimized out>
command = (const struct command *) 0x7ffff7ddd240
cs = 0x7fffffffd770 "load-module module-ladspa-sink
sink_name=ladspa_out master=alsa_output.pci_8086_3a3e_sound_card_0
plugin=mbeq_1197 label=mbeq control=-1000,-10,0,0,0,0,0,0,0,0,0,0,0,0,0"
__func__ = "pa_cli_command_execute_line_stateful"
__PRETTY_FUNCTION__ = "pa_cli_command_execute_line_stateful"
#8 0x00007ffff7b7f781 in pa_cli_command_execute_file_stream (c=0x61c1b0,
f=0x6216a0, buf=0x619ad0, fail=0x618af5)
at pulsecore/cli-command.c:1714
line = "load-module module-ladspa-sink sink_name=ladspa_out
master=alsa_output.pci_8086_3a3e_sound_card_0 plugin=mbeq_1197 label=mbeq
control=-1000,-10,0,0,0,0,0,0,0,0,0,0,0,0,0\000\0000,0,0,0,0,0,1,0\000\000\000621622,-0.2"...
---Type <return> to continue, or q <return> to quit---
ifstate = -1
ret = <value optimized out>
_fail = true
__func__ = "pa_cli_command_execute_file_stream"
__PRETTY_FUNCTION__ = "pa_cli_command_execute_file_stream"
#9 0x000000000040b953 in main (argc=1, argv=<value optimized out>) at
daemon/main.c:1013
f = <value optimized out>
c = (pa_core *) 0x61c1b0
buf = (pa_strbuf *) 0x619ad0
conf = (pa_daemon_conf *) 0x618af0
mainloop = (pa_mainloop *) 0x619b20
s = <value optimized out>
r = <value optimized out>
retval = 1
d = 1
suid_root = <value optimized out>
real_root = <value optimized out>
valid_pid_file = true
gid = 4294967295
ltdl_init = <value optimized out>
passed_fd = <value optimized out>
e = <value optimized out>
daemon_pipe = {-1, -1}
autospawn_fd = -1
autospawn_locked = false
dbus = <value optimized out>
__func__ = "main"
__PRETTY_FUNCTION__ = "main"
}}}
--
Ticket URL: <http://pulseaudio.org/ticket/540#comment:4>
PulseAudio <http://pulseaudio.org/>
The PulseAudio Sound Server
_______________________________________________
pulseaudio-tickets mailing list
pulseaudio-tickets@mail.0pointer.de
https://tango.0pointer.de/mailman/listinfo/pulseaudio-tickets
