Issue #1574 has been updated by jamtur01. Category set to library Status changed from Unreviewed to Duplicate Target version set to 1.5.3
Sorry - I am obviously a bit slow but what exactly is the issue? If you mean we don't get all IP address then I agree this is a known issue and hasn't been resolved. Happy to accept a patch if you have any ideas... ---------------------------------------- Bug #1574: ipaddress fact does not show all IP addresses when using "ip" to configure networking http://projects.reductivelabs.com/issues/show/1574 Author: ssm Status: Duplicate Priority: Normal Assigned to: Category: library Target version: 1.5.3 Complexity: Unknown Keywords: ip address iproute h1. Description The "ipaddress" fact does not show all IP addresses on every interface when the "ip" command from "iproute" is use to configure networking. h1. Example output Example output from "ip" shows several addresses on a network interface. "ifconfig" will only show the first inet and the first inet6 address on the interface. h2. Output from "ip" <pre> $ ip address show eth0 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:1a:6b:6d:65:d7 brd ff:ff:ff:ff:ff:ff inet 62.92.3.234/27 brd 62.92.3.255 scope global eth0 inet 192.0.2.1/24 brd 192.0.2.255 scope global eth0 inet 192.0.2.2/24 brd 192.0.2.255 scope global secondary eth0 inet6 fe80::21a:6bff:fe6d:65d7/64 scope link valid_lft forever preferred_lft forever </pre> h2. Output from "ifconfig" Even if "ip" is used to configure the network and routing, "ifconfig" will. if installed, only display a subset of the information. <pre> $ ifconfig eth0 eth0 Link encap:Ethernet HWaddr 00:1a:6b:6d:65:d7 inet addr:62.92.3.234 Bcast:62.92.3.255 Mask:255.255.255.224 inet6 addr: fe80::21a:6bff:fe6d:65d7/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:9268 errors:0 dropped:0 overruns:0 frame:0 TX packets:8746 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5327086 (5.0 MB) TX bytes:1152726 (1.0 MB) Base address:0x1820 Memory:fe000000-fe020000 </pre> h2. Output from facter <pre> $ facter | grep ipaddress ipaddress => 62.92.3.234 ipaddress_eth0 => 62.92.3.234 $ facter | grep netmask netmask => 255.255.255.224 netmask_eth0 => 255.255.255.224 </pre> h2. Information about the host <pre> $ facter | grep lsb lsbdistcodename => hardy lsbdistdescription => Ubuntu 8.04.1 lsbdistid => Ubuntu lsbdistrelease => 8.04 </pre> ---------------------------------------- You have received this notification because you have either subscribed to it, or are involved in it. To change your notification preferences, please click here: http://reductivelabs.com/redmine/my/account --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Puppet Bugs" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/puppet-bugs?hl=en -~----------~----~----~----~------~----~------~--~---
