Hello,
when running the command "ip a" on a debian VM, I get this
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP qlen 1000
link/ether 00:50:56:99:73:35 brd ff:ff:ff:ff:ff:ff
inet 10.66.112.71/24 brd 10.66.112.255 scope global eth0
*inet6 fe80::250:56ff:fe99:7335/64* scope link
valid_lft forever preferred_lft forever
But with facter run as root I don't get any inet6 adress
facter | grep addr
ipaddress => 10.66.112.71
ipaddress_eth0 => 10.66.112.71
ipaddress_lo => 127.0.0.1
macaddress => 00:50:56:99:73:35
macaddress_eth0 => 00:50:56:99:73:35
I'm using facter v1.6.8
Could you please tell me how to get the IPv6 adresse using facter ?
Thanks in advance
Best regards,
Christophe
--
You received this message because you are subscribed to the Google Groups
"Puppet Users" group.
To view this discussion on the web visit
https://groups.google.com/d/msg/puppet-users/-/9Xpu5DvWYTEJ.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to
[email protected].
For more options, visit this group at
http://groups.google.com/group/puppet-users?hl=en.
