oops, now the answer to your question :) the ratio is modulator/carrier freq, so if your (carrier) frequency is 200 hz and you want a ratio of 4.33 then your modulator frequency has to be 200 * 4.33 = 866hz also depending on the modulation index (mod amplitude) you will generate overtones (and undertones actualy), if your ratio is not a whole number, you will add disharmonic content (noisyness).
jk On 03/15/2011 04:49 PM, Adriaan Cornelis van Kampen wrote: > hey stefan, > > you have to switch the modulation type to FM (default is OFF) > then you will have a second (modulator) frequency parameter > see attached image > > jk > > On 03/13/2011 11:00 AM, Stefan Thomas wrote: >> Dear community, >> maybee my question is very stupid, but I couldn't find out: >> How can I change the ratio for fm-synthesis in zynaddsubfx? >> --- >> [email protected] >> http://identi.ca/group/puredyne >> irc://irc.goto10.org/puredyne > > > > --- > [email protected] > http://identi.ca/group/puredyne > irc://irc.goto10.org/puredyne --- [email protected] http://identi.ca/group/puredyne irc://irc.goto10.org/puredyne
