On 03/15/2011 06:24 PM, Stefan Thomas wrote: > I could change to fm, but I couldn't change the external modulator to "on".
that's not needed to get a carrier/modulator pair (fm) > And is it true, that I can change the modulator's frequency only in cents, > not in ratios? ratio here denotes the relative pitch of the modulator compared to the carrier. pitches are changed in cents, one cent is a hundredth of a half tone (an interval of c-c# for example), so it's again a relative pitch, not absolute (like Hertz). so by changing the modfreq in cents, you actualy do change the ratio > > hey stefan, >> >> you have to switch the modulation type to FM (default is OFF) >> then you will have a second (modulator) frequency parameter >> see attached image >> >> jk >> > > On 03/13/2011 11:00 AM, Stefan Thomas wrote: >> Dear community, >> maybee my question is very stupid, but I couldn't find out: >> How can I change the ratio for fm-synthesis in zynaddsubfx? >> --- >> [email protected] >> http://identi.ca/group/puredyne >> irc://irc.goto10.org/puredyne > > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: zynfm.png > Type: image/png > Size: 190029 bytes > Desc: not available > URL: < > http://lists.goto10.org/pipermail/puredyne/attachments/20110315/b8ea550e/attachment.png >> > > > > --- > [email protected] > http://identi.ca/group/puredyne > irc://irc.goto10.org/puredyne --- [email protected] http://identi.ca/group/puredyne irc://irc.goto10.org/puredyne
