Hi, I've already managed to sync Seq24 to Jack, so that playing Jack starts the Seq24 sequencer. However, I can't seem to get Jack to sync to my Electribe, either clocking the tempo or starting/stopping whenever I start/stop on my Electribe.
Anyone got any ideas? Loz On Sat, Mar 26, 2011 at 4:30 AM, geoffroy tremblay <g...@ponnuki.net> wrote: > you are right seq24 will not accept midi clock directly (but will send > midi clock directly...) > > yeah there is not much information about it around - i found a bit of > info that might do the trick > > http://ooommm.org/sudelwiki/Seq24 > > which at least give you some trick to start seq24 visible in jack: > > seq24 --manual_alsa_ports > > and the jack sync : > > Setting up JACK-Sync in seq24: > File -> Options -> Jack Sync > check Jack Transport & Song Mode, then hit CONNECT > you can leave the seq24-window now and go back to Ardour or JACK/qjackctl > > > let me know where you get with that I would be interested to see how > you can set that up. > > > On Fri, Mar 25, 2011 at 4:18 AM, Loz <mister...@gmail.com> wrote: >> Hey, >> >> If that's true, that's great. I'm pretty certain I've tried this, and >> Seq24 will not clock to an external source, apart from Jack. >> >> >> >> On Thu, Mar 24, 2011 at 10:45 PM, geoffroy tremblay <g...@ponnuki.net> wrote: >>> I don't think you need jack to run seq24 - it detect the input and >>> midi output automatically no ? >>> I use it to control my dark energy at home and I am pretty sure I >>> don't use jack - >>> >>> that is if you only want to use seq24 >>> >>> I'll check my setup and let you know tomorrow. >>> >>> On Thu, Mar 24, 2011 at 10:04 AM, Loz <mister...@gmail.com> wrote: >>>> No worries. I'll answer the questions I probably should have >>>> pre-emptively answered >>>> >>>>> you have a midi-in, on your sound card and you connect your sequencer >>>>> to it right ? >>>> >>>> Yep >>>> >>>>> what sequencer are you using ? and are you sure it's spitting out your >>>>> midi clock ? >>>> >>>> Korg Electribe-SX. It's definitely sending out MIDI clock, along with >>>> start and stop messages, because it can sequence other hardware with >>>> no issues. I've also used it a couple of times to start off my DAW on >>>> my windows PC. >>>> >>>>> And what software are you using on jack ? >>>> >>>> Just Seq24 at the moment. This is my new live setup. Want to use the >>>> Electribe as the midi master, as I have tempo data programmed into >>>> patches, so I don't have to remember to change tempo all the time (as >>>> I forget). However, the internal note sequencers on the Electribe (of >>>> which there are two) are mono only, and I use Seq24 for my keyboard >>>> parts. >>>> >>>>> You should be able to map your midi-in clock in jack to any midi >>>>> capable software (or jack capable software) >>>> >>>> This is where I'm falling down. Think I'm doing this right, but I've >>>> found surprisingly little documentation on this online. >>>> >>>> >>>> Thanks, >>>> Loz >>>> >>> >> > --- Puredyne@goto10.org http://identi.ca/group/puredyne irc://irc.goto10.org/puredyne
