hi, when i trie to boot from usb stick on pc laptop i got message that operating system not found... i followed instructions created - two ext2 partitions, one bootable (primary) and secod logial drive labeled live-rw, the burned iso puredyne-911-carrot_and_coriander-DVD-i386 with unetbootin,choosing that bootable partition btw i already got puredyne on that laptops hdd but i wanted to try also usb -- Citējot *Tyler Leavitt <[email protected]> [1]*: > If you got errors, what exactly were the errors? Describe what you > mean by "doesn't work". It could be any numbe rof things... > Tyler > > On Fri, May 13, 2011 at 2:47 PM, grant centauri > <[email protected]> wrote: >> i always md5sum check mine if i have a problem. I have >> consistently run into a problem where i'll make my usb stick, check >> it, its fine, try to boot, it doesnt work, and then check it again >> and have a few errors. redoing the install and trying again seems >> to work most of the time. >> >> >> >> On Fri, May 13, 2011 at 4:19 PM, >> <[email protected]> wrote: >>> hi,yeah, i changed the boot-settings in my bios, >>> maybe i will try another usb stick, this was suspicious... >>> >>> Citējot *chr <[email protected]> [2]*: >>>> Am 13.05.2011 04:52, schrieb F. Medeiros: >>>> > I can confirm that it works for me but only >>>> if the file system is ext2. >>>> for me too, it worked fine with ext2 >>>> >>>> i just created with gparted the two >>>> partitions... >>>> ...it does not work on macs >>>> but on other machines i have never had problems >>>> >>>> did you changed the boot-settings in your bios? >>>> >>>> http://en.wikibooks.org/wiki/Puredyne/Booting_a_live_USB_stick >>>> [3] >>>> >>>> ...some old pc's also do not support booting >>>> from usb-stick (my old >>>> pentium 1-laptop couldnt do it, f.ex) >>>> >>>> greetings >>>> >>>> christian >>>> > >>>> > On Thu, 2011-05-12 at 16:44 -0700, >>>> KarlHungus wrote: >>>> >> hi, i tried to create puredyne usb >>>> stick with unetbootin method using >>>> >> >>>> puredyne-911-carrot_and_coriander-DVD-i386. i followed >>>> instructions created >>>> >> primary partition and logical drive >>>> live-rw and burned the iso with >>>> >> unetbootin but unfortunately my stick >>>> can't boot, can someone confirm that >>>> >> this method actually works? >>>> >> >>>> >> >>>> >> -- >>>> >> View this message in context: >>>> http://puredyne.466513.n3.nabble.com/creating-usb-stick-with-unetbootin-tp2934065p2934065.html >>>> [4] >>>> >> Sent from the Puredyne mailing list >>>> archive at Nabble.com. >>>> >> --- >>>> >> [email protected] >>>> >> http://identi.ca/group/puredyne [5] >>>> >> irc://irc.goto10.org/puredyne [6] >>>> > >>>> > --- >>>> > [email protected] >>>> > http://identi.ca/group/puredyne [7] >>>> > irc://irc.goto10.org/puredyne [8] >>>> > >>> >>> >>> >>> >>> >>> --- >>> [email protected] >>> http://identi.ca/group/puredyne [9] >>> irc://irc.goto10.org/puredyne [10] >> >> >> >> --- >> [email protected] >> http://identi.ca/group/puredyne [11] >> irc://irc.goto10.org/puredyne [12] >
Links: ------ [1] mailto:[email protected] [2] mailto:[email protected] [3] http://en.wikibooks.org/wiki/Puredyne/Booting_a_live_USB_stick [4] http://puredyne.466513.n3.nabble.com/creating-usb-stick-with-unetbootin-tp2934065p2934065.html [5] http://identi.ca/group/puredyne [6] http://irc.goto10.org/puredyne [7] http://identi.ca/group/puredyne [8] http://irc.goto10.org/puredyne [9] http://identi.ca/group/puredyne [10] http://irc.goto10.org/puredyne [11] http://identi.ca/group/puredyne [12] http://irc.goto10.org/puredyne
--- [email protected] http://identi.ca/group/puredyne irc://irc.goto10.org/puredyne
