Hi
Trying to set up a Live USB stick for OSX intel machines following the
tutorial here:
http://en.wikibooks.org/wiki/Puredyne/Creating_a_live_USB_stick
I've got a Live CD working with
"puredyne-911-carrot_and_coriander-CD-i386.iso" (on Macbook Pro 2), manage
to get all the way through the USB install, everything looks ok, the stick
gets populated with folders and files and it completes in the command prompt
without any errors that I can see. I restart holding down alt but no
bootable USB stick? I've tried installing twice, the same each time, and
I've tried the stick in another newer intel mac (a 2011 imac) which doesn't
show the stick ether. When I boot into OSX it tells me the stick is
"unreadable by this computer" - looking at it in Disk Utility it has two
Linux partitions (I presume that's normal).
The command prompt output when I'm installing from the running Live CD is
below. Any help/suggestions as to where I'm going wrong would be much
appreciated.
Garrett
(~) % sudo bouilloncube/sh/grub2/make-live-device.sh
Desktop/puredyne-911-carrot_and_coriander-CD-i386.iso /dev/sdb
[?] Are you sure your target is /dev/sdb ? (y/n)y
[*] mounting ISO
[*] ISO file is 726 MB
[*] force unmounting partitions from /dev/sdb
umount: /dev/sdb: not mounted
[*] erasing target's partition table
Warning: Unable to open /dev/sr0 read-write (Read-only file system).
/dev/sr0 has been opened read-only.
umount: /dev/sdb: not mounted
[*] creating system partition of 826 MB
[*] force unmounting partition /dev/sdb1
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=puredyne
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
50512 inodes, 201652 blocks
10082 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=209715200
7 block groups
32768 blocks per group, 32768 fragments per group
7216 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 30 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[*] creating persistence partition
[*] force unmounting partition /dev/sdb2
mke2fs 1.41.9 (22-Aug-2009)
Filesystem label=live-rw
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
441504 inodes, 1763651 blocks
88182 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=1807745024
54 block groups
32768 blocks per group, 32768 fragments per group
8176 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632
Writing inode tables: done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 28 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
[*] copying live folder
[*] grub configuration
[*] device ID is a2ace92b-d270-46d1-83b1-f09036c15fa5
Installation finished. No error reported.
This is the contents of the device map
/mnt/make-live-device/boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install'.
(hd0) /dev/sda
(hd1) /dev/sdb
Using bouilloncube/sh/grub2/grub-puredyne-1010.cfg.in
/mnt/make-live-iso ~
`live/' -> `/mnt/make-live-device/live'
`live/filesystem.squashfs' ->
`/mnt/make-live-device/live/filesystem.squashfs'
`live/initrd.img' -> `/mnt/make-live-device/live/initrd.img'
`live/memtest' -> `/mnt/make-live-device/live/memtest'
`live/packages.txt' -> `/mnt/make-live-device/live/packages.txt'
`live/parameters.txt' -> `/mnt/make-live-device/live/parameters.txt'
`live/vmlinuz' -> `/mnt/make-live-device/live/vmlinuz'
`LICENSE' -> `/mnt/make-live-device/LICENSE'
`extra' -> `/mnt/make-live-device/extra'
`extra/grub' -> `/mnt/make-live-device/extra/grub'
`extra/grub/grub.cfg' -> `/mnt/make-live-device/extra/grub/grub.cfg'
`extra/grub/menu.lst' -> `/mnt/make-live-device/extra/grub/menu.lst'
`extra/grub2' -> `/mnt/make-live-device/extra/grub2'
`extra/grub2/98_puredyne-live' ->
`/mnt/make-live-device/extra/grub2/98_puredyne-live'
`extra/grub2/99_puredyne-iso' ->
`/mnt/make-live-device/extra/grub2/99_puredyne-iso'
`extra/grub2/README.puredyne-live' ->
`/mnt/make-live-device/extra/grub2/README.puredyne-live'
`md5sum.txt' -> `/mnt/make-live-device/md5sum.txt'
`pure.seed' -> `/mnt/make-live-device/pure.seed'
`README' -> `/mnt/make-live-device/README'
~ /mnt/make-live-iso
[*] cleaning up, unmounting and ...
umount: /dev/sdb: not mounted
umount: /dev/sdb2: not mounted
[*] ...done.
(~) %
--
View this message in context:
http://puredyne.466513.n3.nabble.com/Live-USB-stick-for-OSX-intel-tp3549445p3549445.html
Sent from the Puredyne mailing list archive at Nabble.com.
---
[email protected]
http://identi.ca/group/puredyne
irc://irc.goto10.org/puredyne
