I think it's missing cleaning of vm on remote storage,
if migration is aborted on phase1 or phase2.
It safe to delete vm conf && disk on remotehost until the end of the phase2,
when disk are switched.
If job is aborted, It trigger "mtunnel exited unexpectedly" on
remotehost, without any cleaning.
(and even in phase2_cleanup, remotehost don't receive the "stop" command
in the tunnel)
example1:
on phase1, I had a hanging source storage, and the job was haning on
scan_local_volumes().
I have manually aborted the job.
on source:
"2022-10-18 06:00:25 local WS tunnel version: 2
2022-10-18 06:00:25 remote WS tunnel version: 2
2022-10-18 06:00:25 minimum required WS tunnel version: 2
websocket tunnel started
2022-10-18 06:00:25 starting migration of VM 111 to node 'formationkvm1'
(10.3.94.10)
tunnel: -> sending command "bwlimit" to remote
tunnel: <- got reply
CMD websocket tunnel died: command 'proxmox-websocket-tunnel' failed:
interrupted by signal
2022-10-18 06:02:03 ERROR: Problem found while scanning volumes - rbd
error: interrupted by signal
2022-10-18 06:02:03 aborting phase 1 - cleanup resources
2022-10-18 06:02:04 ERROR: writing to tunnel failed: broken pipe
2022-10-18 06:02:04 ERROR: migration aborted (duration 00:01:39):
Problem found while scanning volumes - rbd error: interrupted by signal
"
on remote host:
"
mtunnel started
received command 'version'
TASK ERROR: mtunnel exited unexpectedly
"
with a lock on the vm config. (no disk created yet).
example2:
manually abort job when disk transfert is running
on source:
"
tunnel: -> sending command "version" to remote
tunnel: <- got reply
2022-10-18 06:35:47 local WS tunnel version: 2
2022-10-18 06:35:47 remote WS tunnel version: 2
2022-10-18 06:35:47 minimum required WS tunnel version: 2
websocket tunnel started
2022-10-18 06:35:47 starting migration of VM 111 to node 'formationkvm1'
(10.3.94.10)
toto monpbs
toto replicat2x
tunnel: -> sending command "bwlimit" to remote
tunnel: <- got reply
2022-10-18 06:35:48 found local disk 'replicat2x:vm-111-disk-0' (in
current VM config)
2022-10-18 06:35:48 mapped: net0 from vmbr0 to vmbr0
2022-10-18 06:35:48 mapped: net1 from vmbr0 to vmbr0
2022-10-18 06:35:48 Allocating volume for drive 'scsi0' on remote
storage 'local-lvm'..
tunnel: -> sending command "disk" to remote
tunnel: <- got reply
2022-10-18 06:35:49 volume 'replicat2x:vm-111-disk-0' is
'local-lvm:vm-10005-disk-0' on the target
tunnel: -> sending command "config" to remote
tunnel: <- got reply
tunnel: -> sending command "start" to remote
tunnel: <- got reply
2022-10-18 06:35:52 Setting up tunnel for '/run/qemu-server/111.migrate'
2022-10-18 06:35:52 Setting up tunnel for '/run/qemu-server/111_nbd.migrate'
2022-10-18 06:35:52 starting storage migration
2022-10-18 06:35:52 scsi0: start migration to
nbd:unix:/run/qemu-server/111_nbd.migrate:exportname=drive-scsi0
drive mirror is starting for drive-scsi0
tunnel: accepted new connection on '/run/qemu-server/111_nbd.migrate'
tunnel: requesting WS ticket via tunnel
tunnel: established new WS for forwarding '/run/qemu-server/111_nbd.migrate'
drive-scsi0: transferred 0.0 B of 32.0 GiB (0.00%) in 0s
drive-scsi0: transferred 101.0 MiB of 32.0 GiB (0.31%) in 1s
drive-scsi0: transferred 209.0 MiB of 32.0 GiB (0.64%) in 2s
drive-scsi0: transferred 318.0 MiB of 32.0 GiB (0.97%) in 3s
drive-scsi0: transferred 428.0 MiB of 32.0 GiB (1.31%) in 4s
drive-scsi0: Cancelling block job
CMD websocket tunnel died: command 'proxmox-websocket-tunnel' failed:
interrupted by signal
drive-scsi0: Done.
2022-10-18 06:36:31 ERROR: online migrate failure - block job (mirror)
error: interrupted by signal
2022-10-18 06:36:31 aborting phase 2 - cleanup resources
2022-10-18 06:36:31 migrate_cancel
2022-10-18 06:36:31 ERROR: writing to tunnel failed: broken pipe
2022-10-18 06:36:31 ERROR: migration finished with problems (duration
00:00:44)
TASK ERROR: migration problems
"
on remote host:
"
mtunnel started
received command 'version'
received command 'bwlimit'
received command 'disk'
WARNING: You have not turned on protection against thin pools running
out of space.
WARNING: Set activation/thin_pool_autoextend_threshold below 100 to
trigger automatic extension of thin pools before they get full.
Logical volume "vm-10005-disk-0" created.
WARNING: Sum of all thin volume sizes (69.00 GiB) exceeds the size of
thin pool pve/data and the amount of free space in volume group (13.87 GiB).
received command 'config'
update VM 10005: -boot order=scsi0;ide2;net0 -cores 4 -ide2
none,media=cdrom -machine pc-i440fx-6.2 -memory 2048 -name debian8 -net0
virtio=5E:57:C7:01:CB:FC,bridge=vmbr0,firewall=1,queues=2,tag=94 -net1
virtio=5E:57:C7:01:CB:FE,bridge=vmbr0,firewall=1,queues=2,tag=94 -numa 0
-ostype l26 -scsi0 local-lvm:vm-10005-disk-0,format=raw,size=32G -scsihw
virtio-scsi-pci -smbios1 uuid=5bd68bc8-c0fd-4f50-9649-f78a8f805e4c
-sockets 2
received command 'start'
migration listens on unix:/run/qemu-server/10005.migrate
storage migration listens on
nbd:unix:/run/qemu-server/10005_nbd.migrate:exportname=drive-scsi0
volume:local-lvm:vm-10005-disk-0,format=raw,size=32G
received command 'ticket'
TASK ERROR: mtunnel exited unexpectedly
"
with a lock on the vmconfig in migrate state.
Le 28/09/22 à 14:50, Fabian Grünbichler a écrit :
> the following two endpoints are used for migration on the remote side
>
> POST /nodes/NODE/qemu/VMID/mtunnel
>
> which creates and locks an empty VM config, and spawns the main qmtunnel
> worker which binds to a VM-specific UNIX socket.
>
> this worker handles JSON-encoded migration commands coming in via this
> UNIX socket:
> - config (set target VM config)
> -- checks permissions for updating config
> -- strips pending changes and snapshots
> -- sets (optional) firewall config
> - disk (allocate disk for NBD migration)
> -- checks permission for target storage
> -- returns drive string for allocated volume
> - disk-import, query-disk-import, bwlimit
> -- handled by PVE::StorageTunnel
> - start (returning migration info)
> - fstrim (via agent)
> - ticket (creates a ticket for a WS connection to a specific socket)
> - resume
> - stop
> - nbdstop
> - unlock
> - quit (+ cleanup)
>
> this worker serves as a replacement for both 'qm mtunnel' and various
> manual calls via SSH. the API call will return a ticket valid for
> connecting to the worker's UNIX socket via a websocket connection.
>
> GET+WebSocket upgrade /nodes/NODE/qemu/VMID/mtunnelwebsocket
>
> gets called for connecting to a UNIX socket via websocket forwarding,
> i.e. once for the main command mtunnel, and once each for the memory
> migration and each NBD drive-mirror/storage migration.
>
> access is guarded by a short-lived ticket binding the authenticated user
> to the socket path. such tickets can be requested over the main mtunnel,
> which keeps track of socket paths currently used by that
> mtunnel/migration instance.
>
> each command handler should check privileges for the requested action if
> necessary.
>
> both mtunnel and mtunnelwebsocket endpoints are not proxied, the
> client/caller is responsible for ensuring the passed 'node' parameter
> and the endpoint handling the call are matching.
>
> Signed-off-by: Fabian Grünbichler <f.gruenbich...@proxmox.com>
> ---
>
> Notes:
> v6:
> - check for Sys.Incoming in mtunnel
> - add definedness checks in 'config' command
> - switch to vm_running_locally in 'resume' command
> - moved $socket_addr closer to usage
> v5:
> - us vm_running_locally
> - move '$socket_addr' declaration closer to usage
> v4:
> - add timeout to accept()
> - move 'bwlimit' to PVE::StorageTunnel and extend it
> - mark mtunnel(websocket) as non-proxied, and check $node accordingly
> v3:
> - handle meta and vmgenid better
> - handle failure of 'config' updating
> - move 'disk-import' and 'query-disk-import' handlers to pve-guest-common
> - improve tunnel exit by letting client close the connection
> - use strict VM config parser
> v2: incorporated Fabian Ebner's feedback, mainly:
> - use modified nbd alloc helper instead of duplicating
> - fix disk cleanup, also cleanup imported disks
> - fix firewall-conf vs firewall-config mismatch
>
> requires
> - pve-access-control with tunnel ticket support (already marked in
> d/control)
> - pve-access-control with Sys.Incoming privilege (not yet
> applied/bumped!)
> - pve-http-server with websocket fixes (could be done via breaks? or
> bumped in
> pve-manager..)
>
> PVE/API2/Qemu.pm | 527 ++++++++++++++++++++++++++++++++++++++++++++++-
> debian/control | 2 +-
> 2 files changed, 527 insertions(+), 2 deletions(-)
>
> diff --git a/PVE/API2/Qemu.pm b/PVE/API2/Qemu.pm
> index 3ec31c26..9270ca74 100644
> --- a/PVE/API2/Qemu.pm
> +++ b/PVE/API2/Qemu.pm
> @@ -4,10 +4,13 @@ use strict;
> use warnings;
> use Cwd 'abs_path';
> use Net::SSLeay;
> -use POSIX;
> use IO::Socket::IP;
> +use IO::Socket::UNIX;
> +use IPC::Open3;
> +use JSON;
> use URI::Escape;
> use Crypt::OpenSSL::Random;
> +use Socket qw(SOCK_STREAM);
>
> use PVE::Cluster qw (cfs_read_file cfs_write_file);;
> use PVE::RRD;
> @@ -38,6 +41,7 @@ use PVE::VZDump::Plugin;
> use PVE::DataCenterConfig;
> use PVE::SSHInfo;
> use PVE::Replication;
> +use PVE::StorageTunnel;
>
> BEGIN {
> if (!$ENV{PVE_GENERATING_DOCS}) {
> @@ -1087,6 +1091,7 @@ __PACKAGE__->register_method({
> { subdir => 'spiceproxy' },
> { subdir => 'sendkey' },
> { subdir => 'firewall' },
> + { subdir => 'mtunnel' },
> ];
>
> return $res;
> @@ -4965,4 +4970,524 @@ __PACKAGE__->register_method({
> return PVE::QemuServer::Cloudinit::dump_cloudinit_config($conf,
> $param->{vmid}, $param->{type});
> }});
>
> +__PACKAGE__->register_method({
> + name => 'mtunnel',
> + path => '{vmid}/mtunnel',
> + method => 'POST',
> + protected => 1,
> + description => 'Migration tunnel endpoint - only for internal use by VM
> migration.',
> + permissions => {
> + check =>
> + [ 'and',
> + ['perm', '/vms/{vmid}', [ 'VM.Allocate' ]],
> + ['perm', '/', [ 'Sys.Incoming' ]],
> + ],
> + description => "You need 'VM.Allocate' permissions on '/vms/{vmid}' and
> Sys.Incoming" .
> + " on '/'. Further permission checks happen during the
> actual migration.",
> + },
> + parameters => {
> + additionalProperties => 0,
> + properties => {
> + node => get_standard_option('pve-node'),
> + vmid => get_standard_option('pve-vmid'),
> + storages => {
> + type => 'string',
> + format => 'pve-storage-id-list',
> + optional => 1,
> + description => 'List of storages to check permission and
> availability. Will be checked again for all actually used storages during
> migration.',
> + },
> + },
> + },
> + returns => {
> + additionalProperties => 0,
> + properties => {
> + upid => { type => 'string' },
> + ticket => { type => 'string' },
> + socket => { type => 'string' },
> + },
> + },
> + code => sub {
> + my ($param) = @_;
> +
> + my $rpcenv = PVE::RPCEnvironment::get();
> + my $authuser = $rpcenv->get_user();
> +
> + my $node = extract_param($param, 'node');
> + my $vmid = extract_param($param, 'vmid');
> +
> + my $storages = extract_param($param, 'storages');
> +
> + my $nodename = PVE::INotify::nodename();
> +
> + raise_param_exc({ node => "node needs to be 'localhost' or local
> hostname '$nodename'" })
> + if $node ne 'localhost' && $node ne $nodename;
> +
> + $node = $nodename;
> +
> + my $storecfg = PVE::Storage::config();
> + foreach my $storeid (PVE::Tools::split_list($storages)) {
> + $check_storage_access_migrate->($rpcenv, $authuser, $storecfg,
> $storeid, $node);
> + }
> +
> + PVE::Cluster::check_cfs_quorum();
> +
> + my $lock = 'create';
> + eval { PVE::QemuConfig->create_and_lock_config($vmid, 0, $lock); };
> +
> + raise_param_exc({ vmid => "unable to create empty VM config - $@"})
> + if $@;
> +
> + my $realcmd = sub {
> + my $state = {
> + storecfg => PVE::Storage::config(),
> + lock => $lock,
> + vmid => $vmid,
> + };
> +
> + my $run_locked = sub {
> + my ($code, $params) = @_;
> + return PVE::QemuConfig->lock_config($state->{vmid}, sub {
> + my $conf = PVE::QemuConfig->load_config($state->{vmid});
> +
> + $state->{conf} = $conf;
> +
> + die "Encountered wrong lock - aborting mtunnel command
> handling.\n"
> + if $state->{lock} && !PVE::QemuConfig->has_lock($conf,
> $state->{lock});
> +
> + return $code->($params);
> + });
> + };
> +
> + my $cmd_desc = {
> + config => {
> + conf => {
> + type => 'string',
> + description => 'Full VM config, adapted for target
> cluster/node',
> + },
> + 'firewall-config' => {
> + type => 'string',
> + description => 'VM firewall config',
> + optional => 1,
> + },
> + },
> + disk => {
> + format =>
> PVE::JSONSchema::get_standard_option('pve-qm-image-format'),
> + storage => {
> + type => 'string',
> + format => 'pve-storage-id',
> + },
> + drive => {
> + type => 'object',
> + description => 'parsed drive information without volid
> and format',
> + },
> + },
> + start => {
> + start_params => {
> + type => 'object',
> + description => 'params passed to vm_start_nolock',
> + },
> + migrate_opts => {
> + type => 'object',
> + description => 'migrate_opts passed to vm_start_nolock',
> + },
> + },
> + ticket => {
> + path => {
> + type => 'string',
> + description => 'socket path for which the ticket should
> be valid. must be known to current mtunnel instance.',
> + },
> + },
> + quit => {
> + cleanup => {
> + type => 'boolean',
> + description => 'remove VM config and disks, aborting
> migration',
> + default => 0,
> + },
> + },
> + 'disk-import' =>
> $PVE::StorageTunnel::cmd_schema->{'disk-import'},
> + 'query-disk-import' =>
> $PVE::StorageTunnel::cmd_schema->{'query-disk-import'},
> + bwlimit => $PVE::StorageTunnel::cmd_schema->{bwlimit},
> + };
> +
> + my $cmd_handlers = {
> + 'version' => sub {
> + # compared against other end's version
> + # bump/reset for breaking changes
> + # bump/bump for opt-in changes
> + return {
> + api => 2,
> + age => 0,
> + };
> + },
> + 'config' => sub {
> + my ($params) = @_;
> +
> + # parse and write out VM FW config if given
> + if (my $fw_conf = $params->{'firewall-config'}) {
> + my ($path, $fh) =
> PVE::Tools::tempfile_contents($fw_conf, 700);
> +
> + my $empty_conf = {
> + rules => [],
> + options => {},
> + aliases => {},
> + ipset => {} ,
> + ipset_comments => {},
> + };
> + my $cluster_fw_conf =
> PVE::Firewall::load_clusterfw_conf();
> +
> + # TODO: add flag for strict parsing?
> + # TODO: add import sub that does all this given raw
> content?
> + my $vmfw_conf =
> PVE::Firewall::generic_fw_config_parser($path, $cluster_fw_conf, $empty_conf,
> 'vm');
> + $vmfw_conf->{vmid} = $state->{vmid};
> + PVE::Firewall::save_vmfw_conf($state->{vmid},
> $vmfw_conf);
> +
> + $state->{cleanup}->{fw} = 1;
> + }
> +
> + my $conf_fn = "incoming/qemu-server/$state->{vmid}.conf";
> + my $new_conf = PVE::QemuServer::parse_vm_config($conf_fn,
> $params->{conf}, 1);
> + delete $new_conf->{lock};
> + delete $new_conf->{digest};
> +
> + # TODO handle properly?
> + delete $new_conf->{snapshots};
> + delete $new_conf->{parent};
> + delete $new_conf->{pending};
> +
> + # not handled by update_vm_api
> + my $vmgenid = delete $new_conf->{vmgenid};
> + my $meta = delete $new_conf->{meta};
> +
> + $new_conf->{vmid} = $state->{vmid};
> + $new_conf->{node} = $node;
> +
> + PVE::QemuConfig->remove_lock($state->{vmid}, 'create');
> +
> + eval {
> + $update_vm_api->($new_conf, 1);
> + };
> + if (my $err = $@) {
> + # revert to locked previous config
> + my $conf = PVE::QemuConfig->load_config($state->{vmid});
> + $conf->{lock} = 'create';
> + PVE::QemuConfig->write_config($state->{vmid}, $conf);
> +
> + die $err;
> + }
> +
> + my $conf = PVE::QemuConfig->load_config($state->{vmid});
> + $conf->{lock} = 'migrate';
> + $conf->{vmgenid} = $vmgenid if defined($vmgenid);
> + $conf->{meta} = $meta if defined($meta);
> + PVE::QemuConfig->write_config($state->{vmid}, $conf);
> +
> + $state->{lock} = 'migrate';
> +
> + return;
> + },
> + 'bwlimit' => sub {
> + my ($params) = @_;
> + return PVE::StorageTunnel::handle_bwlimit($params);
> + },
> + 'disk' => sub {
> + my ($params) = @_;
> +
> + my $format = $params->{format};
> + my $storeid = $params->{storage};
> + my $drive = $params->{drive};
> +
> + $check_storage_access_migrate->($rpcenv, $authuser,
> $state->{storecfg}, $storeid, $node);
> +
> + my $storagemap = {
> + default => $storeid,
> + };
> +
> + my $source_volumes = {
> + 'disk' => [
> + undef,
> + $storeid,
> + undef,
> + $drive,
> + 0,
> + $format,
> + ],
> + };
> +
> + my $res =
> PVE::QemuServer::vm_migrate_alloc_nbd_disks($state->{storecfg},
> $state->{vmid}, $source_volumes, $storagemap);
> + if (defined($res->{disk})) {
> + $state->{cleanup}->{volumes}->{$res->{disk}->{volid}} =
> 1;
> + return $res->{disk};
> + } else {
> + die "failed to allocate NBD disk..\n";
> + }
> + },
> + 'disk-import' => sub {
> + my ($params) = @_;
> +
> + $check_storage_access_migrate->(
> + $rpcenv,
> + $authuser,
> + $state->{storecfg},
> + $params->{storage},
> + $node
> + );
> +
> + $params->{unix} = "/run/qemu-server/$state->{vmid}.storage";
> +
> + return PVE::StorageTunnel::handle_disk_import($state,
> $params);
> + },
> + 'query-disk-import' => sub {
> + my ($params) = @_;
> +
> + return PVE::StorageTunnel::handle_query_disk_import($state,
> $params);
> + },
> + 'start' => sub {
> + my ($params) = @_;
> +
> + my $info = PVE::QemuServer::vm_start_nolock(
> + $state->{storecfg},
> + $state->{vmid},
> + $state->{conf},
> + $params->{start_params},
> + $params->{migrate_opts},
> + );
> +
> +
> + if ($info->{migrate}->{proto} ne 'unix') {
> + PVE::QemuServer::vm_stop(undef, $state->{vmid}, 1, 1);
> + die "migration over non-UNIX sockets not possible\n";
> + }
> +
> + my $socket = $info->{migrate}->{addr};
> + chown $state->{socket_uid}, -1, $socket;
> + $state->{sockets}->{$socket} = 1;
> +
> + my $unix_sockets = $info->{migrate}->{unix_sockets};
> + foreach my $socket (@$unix_sockets) {
> + chown $state->{socket_uid}, -1, $socket;
> + $state->{sockets}->{$socket} = 1;
> + }
> + return $info;
> + },
> + 'fstrim' => sub {
> + if (PVE::QemuServer::qga_check_running($state->{vmid})) {
> + eval { mon_cmd($state->{vmid}, "guest-fstrim") };
> + warn "fstrim failed: $@\n" if $@;
> + }
> + return;
> + },
> + 'stop' => sub {
> + PVE::QemuServer::vm_stop(undef, $state->{vmid}, 1, 1);
> + return;
> + },
> + 'nbdstop' => sub {
> + PVE::QemuServer::nbd_stop($state->{vmid});
> + return;
> + },
> + 'resume' => sub {
> + if
> (PVE::QemuServer::Helpers::vm_running_locally($state->{vmid})) {
> + PVE::QemuServer::vm_resume($state->{vmid}, 1, 1);
> + } else {
> + die "VM $state->{vmid} not running\n";
> + }
> + return;
> + },
> + 'unlock' => sub {
> + PVE::QemuConfig->remove_lock($state->{vmid},
> $state->{lock});
> + delete $state->{lock};
> + return;
> + },
> + 'ticket' => sub {
> + my ($params) = @_;
> +
> + my $path = $params->{path};
> +
> + die "Not allowed to generate ticket for unknown socket
> '$path'\n"
> + if !defined($state->{sockets}->{$path});
> +
> + return { ticket =>
> PVE::AccessControl::assemble_tunnel_ticket($authuser, "/socket/$path") };
> + },
> + 'quit' => sub {
> + my ($params) = @_;
> +
> + if ($params->{cleanup}) {
> + if ($state->{cleanup}->{fw}) {
> + PVE::Firewall::remove_vmfw_conf($state->{vmid});
> + }
> +
> + for my $volid (keys $state->{cleanup}->{volumes}->%*) {
> + print "freeing volume '$volid' as part of
> cleanup\n";
> + eval { PVE::Storage::vdisk_free($state->{storecfg},
> $volid) };
> + warn $@ if $@;
> + }
> +
> + PVE::QemuServer::destroy_vm($state->{storecfg},
> $state->{vmid}, 1);
> + }
> +
> + print "switching to exit-mode, waiting for client to
> disconnect\n";
> + $state->{exit} = 1;
> + return;
> + },
> + };
> +
> + $run_locked->(sub {
> + my $socket_addr = "/run/qemu-server/$state->{vmid}.mtunnel";
> + unlink $socket_addr;
> +
> + $state->{socket} = IO::Socket::UNIX->new(
> + Type => SOCK_STREAM(),
> + Local => $socket_addr,
> + Listen => 1,
> + );
> +
> + $state->{socket_uid} = getpwnam('www-data')
> + or die "Failed to resolve user 'www-data' to numeric UID\n";
> + chown $state->{socket_uid}, -1, $socket_addr;
> + });
> +
> + print "mtunnel started\n";
> +
> + my $conn = eval { PVE::Tools::run_with_timeout(300, sub {
> $state->{socket}->accept() }) };
> + if ($@) {
> + warn "Failed to accept tunnel connection - $@\n";
> +
> + warn "Removing tunnel socket..\n";
> + unlink $state->{socket};
> +
> + warn "Removing temporary VM config..\n";
> + $run_locked->(sub {
> + PVE::QemuServer::destroy_vm($state->{storecfg},
> $state->{vmid}, 1);
> + });
> +
> + die "Exiting mtunnel\n";
> + }
> +
> + $state->{conn} = $conn;
> +
> + my $reply_err = sub {
> + my ($msg) = @_;
> +
> + my $reply = JSON::encode_json({
> + success => JSON::false,
> + msg => $msg,
> + });
> + $conn->print("$reply\n");
> + $conn->flush();
> + };
> +
> + my $reply_ok = sub {
> + my ($res) = @_;
> +
> + $res->{success} = JSON::true;
> + my $reply = JSON::encode_json($res);
> + $conn->print("$reply\n");
> + $conn->flush();
> + };
> +
> + while (my $line = <$conn>) {
> + chomp $line;
> +
> + # untaint, we validate below if needed
> + ($line) = $line =~ /^(.*)$/;
> + my $parsed = eval { JSON::decode_json($line) };
> + if ($@) {
> + $reply_err->("failed to parse command - $@");
> + next;
> + }
> +
> + my $cmd = delete $parsed->{cmd};
> + if (!defined($cmd)) {
> + $reply_err->("'cmd' missing");
> + } elsif ($state->{exit}) {
> + $reply_err->("tunnel is in exit-mode, processing '$cmd' cmd
> not possible");
> + next;
> + } elsif (my $handler = $cmd_handlers->{$cmd}) {
> + print "received command '$cmd'\n";
> + eval {
> + if ($cmd_desc->{$cmd}) {
> + PVE::JSONSchema::validate($cmd_desc->{$cmd},
> $parsed);
> + } else {
> + $parsed = {};
> + }
> + my $res = $run_locked->($handler, $parsed);
> + $reply_ok->($res);
> + };
> + $reply_err->("failed to handle '$cmd' command - $@")
> + if $@;
> + } else {
> + $reply_err->("unknown command '$cmd' given");
> + }
> + }
> +
> + if ($state->{exit}) {
> + print "mtunnel exited\n";
> + } else {
> + die "mtunnel exited unexpectedly\n";
> + }
> + };
> +
> + my $socket_addr = "/run/qemu-server/$vmid.mtunnel";
> + my $ticket = PVE::AccessControl::assemble_tunnel_ticket($authuser,
> "/socket/$socket_addr");
> + my $upid = $rpcenv->fork_worker('qmtunnel', $vmid, $authuser, $realcmd);
> +
> + return {
> + ticket => $ticket,
> + upid => $upid,
> + socket => $socket_addr,
> + };
> + }});
> +
> +__PACKAGE__->register_method({
> + name => 'mtunnelwebsocket',
> + path => '{vmid}/mtunnelwebsocket',
> + method => 'GET',
> + permissions => {
> + description => "You need to pass a ticket valid for the selected
> socket. Tickets can be created via the mtunnel API call, which will check
> permissions accordingly.",
> + user => 'all', # check inside
> + },
> + description => 'Migration tunnel endpoint for websocket upgrade - only
> for internal use by VM migration.',
> + parameters => {
> + additionalProperties => 0,
> + properties => {
> + node => get_standard_option('pve-node'),
> + vmid => get_standard_option('pve-vmid'),
> + socket => {
> + type => "string",
> + description => "unix socket to forward to",
> + },
> + ticket => {
> + type => "string",
> + description => "ticket return by initial 'mtunnel' API call, or
> retrieved via 'ticket' tunnel command",
> + },
> + },
> + },
> + returns => {
> + type => "object",
> + properties => {
> + port => { type => 'string', optional => 1 },
> + socket => { type => 'string', optional => 1 },
> + },
> + },
> + code => sub {
> + my ($param) = @_;
> +
> + my $rpcenv = PVE::RPCEnvironment::get();
> + my $authuser = $rpcenv->get_user();
> +
> + my $nodename = PVE::INotify::nodename();
> + my $node = extract_param($param, 'node');
> +
> + raise_param_exc({ node => "node needs to be 'localhost' or local
> hostname '$nodename'" })
> + if $node ne 'localhost' && $node ne $nodename;
> +
> + my $vmid = $param->{vmid};
> + # check VM exists
> + PVE::QemuConfig->load_config($vmid);
> +
> + my $socket = $param->{socket};
> + PVE::AccessControl::verify_tunnel_ticket($param->{ticket}, $authuser,
> "/socket/$socket");
> +
> + return { socket => $socket };
> + }});
> +
> 1;
> diff --git a/debian/control b/debian/control
> index a90ecd6f..ce469cbd 100644
> --- a/debian/control
> +++ b/debian/control
> @@ -33,7 +33,7 @@ Depends: dbus,
> libjson-perl,
> libjson-xs-perl,
> libnet-ssleay-perl,
> - libpve-access-control (>= 5.0-7),
> + libpve-access-control (>= 7.0-7),
> libpve-cluster-perl,
> libpve-common-perl (>= 7.1-4),
> libpve-guest-common-perl (>= 4.1-1),
_______________________________________________
pve-devel mailing list
pve-devel@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-devel
