As a side note regarding daemon.conf, fwupd since Trixie stores its config at /etc/fwupd/fwupd.conf. This was changed in [7fa42274], which first appeared in fwupd [1.9.1].
[7fa42274] https://github.com/fwupd/fwupd/commit/7fa422744c42d5f6a207d43c094d02dece64baf6 [1.9.1] https://github.com/fwupd/fwupd/releases/tag/1.9.1 [#8945] https://github.com/fwupd/fwupd/issues/8945#issuecomment-2993821262 Signed-off-by: Maximiliano Sandoval <[email protected]> --- firmware-updates.adoc | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) diff --git a/firmware-updates.adoc b/firmware-updates.adoc index ea31dac..d9025d4 100644 --- a/firmware-updates.adoc +++ b/firmware-updates.adoc @@ -52,14 +52,7 @@ booted via UEFI. {pve} ships its own version of the `fwupd` package to enable Secure Boot Support with the Proxmox signing key. This package consciously dropped the dependency recommendation for the `udisks2` package, due to observed issues with -its use on hypervisors. That means you must explicitly configure the correct -mount point of the EFI partition in `/etc/fwupd/daemon.conf`, for example: - -.File `/etc/fwupd/daemon.conf` ----- -# Override the location used for the EFI system partition (ESP) path. -EspLocation=/boot/efi ----- +its use on hypervisors. TIP: If the update instructions require a host reboot, make sure that it can be done safely. See also xref:ha_manager_node_maintenance[Node Maintenance]. -- 2.47.3
