Signed-off-by: Thomas Lamprecht <t.lampre...@proxmox.com>
---
 ...ool-reopen-should-detect-expanded-devices.patch | 363 +++++++++++++++++++++
 ...tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch |  60 ++++
 zfs-patches/0037-Tag-zfs-0.7.11.patch              |  56 ++++
 zfs-patches/series                                 |   3 +
 4 files changed, 482 insertions(+)
 create mode 100644 
zfs-patches/0035-Revert-zpool-reopen-should-detect-expanded-devices.patch
 create mode 100644 
zfs-patches/0036-tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch
 create mode 100644 zfs-patches/0037-Tag-zfs-0.7.11.patch

diff --git 
a/zfs-patches/0035-Revert-zpool-reopen-should-detect-expanded-devices.patch 
b/zfs-patches/0035-Revert-zpool-reopen-should-detect-expanded-devices.patch
new file mode 100644
index 0000000..a991a28
--- /dev/null
+++ b/zfs-patches/0035-Revert-zpool-reopen-should-detect-expanded-devices.patch
@@ -0,0 +1,363 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Tony Hutter <hutt...@llnl.gov>
+Date: Thu, 13 Sep 2018 10:11:42 -0700
+Subject: [PATCH] Revert "zpool reopen should detect expanded devices"
+
+This reverts commit 2a16d4cfaf791ba2a6f61b29d1e3f2e7b675f913.
+
+The commit was causing a "attempt to access beyond the end
+of device" error:
+
+list.zfsonlinux.org/pipermail/zfs-discuss/2018-September/032217.html
+
+Signed-off-by: Thomas Lamprecht <t.lampre...@proxmox.com>
+---
+ include/sys/vdev_disk.h                            | 12 -----
+ lib/libefi/rdwr_efi.c                              | 20 +-------
+ lib/libzfs/libzfs_pool.c                           | 14 +++++-
+ module/zfs/vdev.c                                  |  3 +-
+ module/zfs/vdev_disk.c                             | 44 ++++--------------
+ .../cli_root/zpool_expand/zpool_expand_002_pos.ksh | 54 +++++++---------------
+ 6 files changed, 41 insertions(+), 106 deletions(-)
+
+diff --git a/include/sys/vdev_disk.h b/include/sys/vdev_disk.h
+index b8a32b316..15570b105 100644
+--- a/include/sys/vdev_disk.h
++++ b/include/sys/vdev_disk.h
+@@ -23,23 +23,11 @@
+  * Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
+  * Written by Brian Behlendorf <behlendo...@llnl.gov>.
+  * LLNL-CODE-403049.
+- * Copyright (c) 2018 by Delphix. All rights reserved.
+  */
+ 
+ #ifndef _SYS_VDEV_DISK_H
+ #define       _SYS_VDEV_DISK_H
+ 
+-/*
+- * Don't start the slice at the default block of 34; many storage
+- * devices will use a stripe width of 128k, other vendors prefer a 1m
+- * alignment.  It is best to play it safe and ensure a 1m alignment
+- * given 512B blocks.  When the block size is larger by a power of 2
+- * we will still be 1m aligned.  Some devices are sensitive to the
+- * partition ending alignment as well.
+- */
+-#define       NEW_START_BLOCK         2048
+-#define       PARTITION_END_ALIGNMENT 2048
+-
+ #ifdef _KERNEL
+ #include <sys/vdev.h>
+ 
+diff --git a/lib/libefi/rdwr_efi.c b/lib/libefi/rdwr_efi.c
+index 19cb17e5a..7935047eb 100644
+--- a/lib/libefi/rdwr_efi.c
++++ b/lib/libefi/rdwr_efi.c
+@@ -22,7 +22,6 @@
+ /*
+  * Copyright (c) 2002, 2010, Oracle and/or its affiliates. All rights 
reserved.
+  * Copyright 2012 Nexenta Systems, Inc.  All rights reserved.
+- * Copyright (c) 2018 by Delphix. All rights reserved.
+  */
+ 
+ #include <stdio.h>
+@@ -1154,7 +1153,7 @@ efi_use_whole_disk(int fd)
+ 
+       /*
+        * Find the last physically non-zero partition.
+-       * This should be the reserved partition.
++       * This is the reserved partition.
+        */
+       for (i = 0; i < efi_label->efi_nparts; i ++) {
+               if (resv_start < efi_label->efi_parts[i].p_start) {
+@@ -1164,23 +1163,6 @@ efi_use_whole_disk(int fd)
+       }
+ 
+       /*
+-       * Verify that we've found the reserved partition by checking
+-       * that it looks the way it did when we created it in zpool_label_disk.
+-       * If we've found the incorrect partition, then we know that this
+-       * device was reformatted and no longer is soley used by ZFS.
+-       */
+-      if ((efi_label->efi_parts[resv_index].p_size != EFI_MIN_RESV_SIZE) ||
+-          (efi_label->efi_parts[resv_index].p_tag != V_RESERVED) ||
+-          (resv_index != 8)) {
+-              if (efi_debug) {
+-                      (void) fprintf(stderr,
+-                          "efi_use_whole_disk: wholedisk not available\n");
+-              }
+-              efi_free(efi_label);
+-              return (VT_ENOSPC);
+-      }
+-
+-      /*
+        * Find the last physically non-zero partition before that.
+        * This is the data partition.
+        */
+diff --git a/lib/libzfs/libzfs_pool.c b/lib/libzfs/libzfs_pool.c
+index 315ba954c..76228d573 100644
+--- a/lib/libzfs/libzfs_pool.c
++++ b/lib/libzfs/libzfs_pool.c
+@@ -22,7 +22,7 @@
+ /*
+  * Copyright 2015 Nexenta Systems, Inc.  All rights reserved.
+  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights 
reserved.
+- * Copyright (c) 2011, 2018 by Delphix. All rights reserved.
++ * Copyright (c) 2011, 2014 by Delphix. All rights reserved.
+  * Copyright 2016 Igor Kozhukhov <ikozhuk...@gmail.com>
+  * Copyright (c) 2017 Datto Inc.
+  */
+@@ -42,7 +42,6 @@
+ #include <sys/efi_partition.h>
+ #include <sys/vtoc.h>
+ #include <sys/zfs_ioctl.h>
+-#include <sys/vdev_disk.h>
+ #include <dlfcn.h>
+ 
+ #include "zfs_namecheck.h"
+@@ -936,6 +935,17 @@ zpool_prop_get_feature(zpool_handle_t *zhp, const char 
*propname, char *buf,
+ }
+ 
+ /*
++ * Don't start the slice at the default block of 34; many storage
++ * devices will use a stripe width of 128k, other vendors prefer a 1m
++ * alignment.  It is best to play it safe and ensure a 1m alignment
++ * given 512B blocks.  When the block size is larger by a power of 2
++ * we will still be 1m aligned.  Some devices are sensitive to the
++ * partition ending alignment as well.
++ */
++#define       NEW_START_BLOCK         2048
++#define       PARTITION_END_ALIGNMENT 2048
++
++/*
+  * Validate the given pool name, optionally putting an extended error message 
in
+  * 'buf'.
+  */
+diff --git a/module/zfs/vdev.c b/module/zfs/vdev.c
+index b643bd354..acac2a973 100644
+--- a/module/zfs/vdev.c
++++ b/module/zfs/vdev.c
+@@ -21,7 +21,7 @@
+ 
+ /*
+  * Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights 
reserved.
+- * Copyright (c) 2011, 2018 by Delphix. All rights reserved.
++ * Copyright (c) 2011, 2015 by Delphix. All rights reserved.
+  * Copyright 2017 Nexenta Systems, Inc.
+  * Copyright (c) 2014 Integros [integros.com]
+  * Copyright 2016 Toomas Soome <tso...@me.com>
+@@ -3039,6 +3039,7 @@ vdev_get_stats_ex(vdev_t *vd, vdev_stat_t *vs, 
vdev_stat_ex_t *vsx)
+                           vd->vdev_max_asize - vd->vdev_asize,
+                           1ULL << tvd->vdev_ms_shift);
+               }
++              vs->vs_esize = vd->vdev_max_asize - vd->vdev_asize;
+               if (vd->vdev_aux == NULL && vd == vd->vdev_top &&
+                   !vd->vdev_ishole) {
+                       vs->vs_fragmentation = vd->vdev_mg->mg_fragmentation;
+diff --git a/module/zfs/vdev_disk.c b/module/zfs/vdev_disk.c
+index c5708cb2b..46fc120fb 100644
+--- a/module/zfs/vdev_disk.c
++++ b/module/zfs/vdev_disk.c
+@@ -23,7 +23,7 @@
+  * Produced at Lawrence Livermore National Laboratory (cf, DISCLAIMER).
+  * Rewritten for Linux by Brian Behlendorf <behlendo...@llnl.gov>.
+  * LLNL-CODE-403049.
+- * Copyright (c) 2012, 2018 by Delphix. All rights reserved.
++ * Copyright (c) 2012, 2015 by Delphix. All rights reserved.
+  */
+ 
+ #include <sys/zfs_context.h>
+@@ -35,14 +35,10 @@
+ #include <sys/zio.h>
+ #include <sys/sunldi.h>
+ #include <linux/mod_compat.h>
+-#include <linux/msdos_fs.h>
+ 
+ char *zfs_vdev_scheduler = VDEV_SCHEDULER;
+ static void *zfs_vdev_holder = VDEV_HOLDER;
+ 
+-/* size of the "reserved" partition, in blocks */
+-#define       EFI_MIN_RESV_SIZE       (16 * 1024)
+-
+ /*
+  * Virtual device vector for disks.
+  */
+@@ -86,39 +82,17 @@ vdev_bdev_mode(int smode)
+ }
+ #endif /* HAVE_OPEN_BDEV_EXCLUSIVE */
+ 
+-/* The capacity (in bytes) of a bdev that is available to be used by a vdev */
+ static uint64_t
+-bdev_capacity(struct block_device *bdev, boolean_t wholedisk)
++bdev_capacity(struct block_device *bdev)
+ {
+       struct hd_struct *part = bdev->bd_part;
+-      uint64_t sectors = get_capacity(bdev->bd_disk);
+-      /* If there are no paritions, return the entire device capacity */
+-      if (part == NULL)
+-              return (sectors << SECTOR_BITS);
+ 
+-      /*
+-       * If there are partitions, decide if we are using a `wholedisk`
+-       * layout (composed of part1 and part9) or just a single partition.
+-       */
+-      if (wholedisk) {
+-              /* Verify the expected device layout */
+-              ASSERT3P(bdev, !=, bdev->bd_contains);
+-              /*
+-               * Sectors used by the EFI partition (part9) as well as
+-               * partion alignment.
+-               */
+-              uint64_t used = EFI_MIN_RESV_SIZE + NEW_START_BLOCK +
+-                  PARTITION_END_ALIGNMENT;
++      /* The partition capacity referenced by the block device */
++      if (part)
++              return (part->nr_sects << 9);
+ 
+-              /* Space available to the vdev, i.e. the size of part1 */
+-              if (sectors <= used)
+-                      return (0);
+-              uint64_t available = sectors - used;
+-              return (available << SECTOR_BITS);
+-      } else {
+-              /* The partition capacity referenced by the block device */
+-              return (part->nr_sects << SECTOR_BITS);
+-      }
++      /* Otherwise assume the full device capacity */
++      return (get_capacity(bdev->bd_disk) << 9);
+ }
+ 
+ static void
+@@ -352,7 +326,9 @@ skip_open:
+       v->vdev_nonrot = blk_queue_nonrot(bdev_get_queue(vd->vd_bdev));
+ 
+       /* Physical volume size in bytes */
+-      *psize = bdev_capacity(vd->vd_bdev, v->vdev_wholedisk);
++      *psize = bdev_capacity(vd->vd_bdev);
++
++      /* TODO: report possible expansion size */
+       *max_psize = *psize;
+ 
+       /* Based on the minimum sector size set the block size */
+diff --git 
a/tests/zfs-tests/tests/functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh
 
b/tests/zfs-tests/tests/functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh
+index 66b6969db..d578ae602 100755
+--- 
a/tests/zfs-tests/tests/functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh
++++ 
b/tests/zfs-tests/tests/functional/cli_root/zpool_expand/zpool_expand_002_pos.ksh
+@@ -26,7 +26,7 @@
+ #
+ 
+ #
+-# Copyright (c) 2012, 2018 by Delphix. All rights reserved.
++# Copyright (c) 2012, 2016 by Delphix. All rights reserved.
+ # Copyright (c) 2017 Lawrence Livermore National Security, LLC.
+ #
+ 
+@@ -43,9 +43,8 @@
+ # 1) Create 3 files
+ # 2) Create a pool backed by the files
+ # 3) Expand the files' size with truncate
+-# 4) Use zpool reopen to check the expandsize
+-# 5) Use zpool online -e to online the vdevs
+-# 6) Check that the pool size was expanded
++# 4) Use zpool online -e to online the vdevs
++# 5) Check that the pool size was expanded
+ #
+ 
+ verify_runnable "global"
+@@ -65,8 +64,8 @@ log_onexit cleanup
+ 
+ log_assert "zpool can expand after zpool online -e zvol vdevs on LUN 
expansion"
+ 
++
+ for type in " " mirror raidz raidz2; do
+-      # Initialize the file devices and the pool
+       for i in 1 2 3; do
+               log_must truncate -s $org_size ${TEMPFILE}.$i
+       done
+@@ -81,35 +80,13 @@ for type in " " mirror raidz raidz2; do
+                   "$autoexp"
+       fi
+       typeset prev_size=$(get_pool_prop size $TESTPOOL1)
+-      typeset zfs_prev_size=$(get_prop avail $TESTPOOL1)
++      typeset zfs_prev_size=$(zfs get -p avail $TESTPOOL1 | tail -1 | \
++          awk '{print $3}')
+ 
+-      # Increase the size of the file devices
+       for i in 1 2 3; do
+               log_must truncate -s $exp_size ${TEMPFILE}.$i
+       done
+ 
+-      # Reopen the pool and check that the `expandsize` property is set
+-      log_must zpool reopen $TESTPOOL1
+-      typeset zpool_expandsize=$(get_pool_prop expandsize $TESTPOOL1)
+-
+-      if [[ $type == "mirror" ]]; then
+-              typeset expected_zpool_expandsize=$(($exp_size-$org_size))
+-      else
+-              typeset expected_zpool_expandsize=$((3*($exp_size-$org_size)))
+-      fi
+-
+-      if [[ "$zpool_expandsize" = "-" ]]; then
+-              log_fail "pool $TESTPOOL1 did not detect any " \
+-                  "expandsize after reopen"
+-      fi
+-
+-      if [[ $zpool_expandsize -ne $expected_zpool_expandsize ]]; then
+-              log_fail "pool $TESTPOOL1 did not detect correct " \
+-                  "expandsize after reopen: found $zpool_expandsize," \
+-                  "expected $expected_zpool_expandsize"
+-      fi
+-
+-      # Online the devices to add the new space to the pool
+       for i in 1 2 3; do
+               log_must zpool online -e $TESTPOOL1 ${TEMPFILE}.$i
+       done
+@@ -119,7 +96,8 @@ for type in " " mirror raidz raidz2; do
+       sync
+ 
+       typeset expand_size=$(get_pool_prop size $TESTPOOL1)
+-      typeset zfs_expand_size=$(get_prop avail $TESTPOOL1)
++      typeset zfs_expand_size=$(zfs get -p avail $TESTPOOL1 | tail -1 | \
++          awk '{print $3}')
+       log_note "$TESTPOOL1 $type has previous size: $prev_size and " \
+           "expanded size: $expand_size"
+ 
+@@ -134,8 +112,8 @@ for type in " " mirror raidz raidz2; do
+                           grep "(+${expansion_size}" | wc -l)
+ 
+                       if [[ $size_addition -ne $i ]]; then
+-                              log_fail "pool $TESTPOOL1 did not expand " \
+-                                  "after LUN expansion and zpool online -e"
++                              log_fail "pool $TESTPOOL1 is not autoexpand " \
++                                  "after LUN expansion"
+                       fi
+               elif [[ $type == "mirror" ]]; then
+                       typeset expansion_size=$(($exp_size-$org_size))
+@@ -145,8 +123,8 @@ for type in " " mirror raidz raidz2; do
+                           grep "(+${expansion_size})" >/dev/null 2>&1
+ 
+                       if [[ $? -ne 0 ]]; then
+-                              log_fail "pool $TESTPOOL1 did not expand " \
+-                                  "after LUN expansion and zpool online -e"
++                              log_fail "pool $TESTPOOL1 is not autoexpand " \
++                                  "after LUN expansion"
+                       fi
+               else
+                       typeset expansion_size=$((3*($exp_size-$org_size)))
+@@ -156,13 +134,13 @@ for type in " " mirror raidz raidz2; do
+                           grep "(+${expansion_size})" >/dev/null 2>&1
+ 
+                       if [[ $? -ne 0 ]] ; then
+-                              log_fail "pool $TESTPOOL1 did not expand " \
+-                                  "after LUN expansion and zpool online -e"
++                              log_fail "pool $TESTPOOL1 is not autoexpand " \
++                                  "after LUN expansion"
+                       fi
+               fi
+       else
+-              log_fail "pool $TESTPOOL1 did not expand after LUN expansion " \
+-                  "and zpool online -e"
++              log_fail "pool $TESTPOOL1 is not autoexpanded after LUN " \
++                  "expansion"
+       fi
+       log_must zpool destroy $TESTPOOL1
+ done
diff --git a/zfs-patches/0036-tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch 
b/zfs-patches/0036-tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch
new file mode 100644
index 0000000..3a16434
--- /dev/null
+++ b/zfs-patches/0036-tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch
@@ -0,0 +1,60 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Dr=2E=20Andr=C3=A1s=20Korn?=
+ <korn-github....@elan.rulez.org>
+Date: Tue, 30 Jan 2018 11:34:39 +0100
+Subject: [PATCH] tx_waited -> tx_dirty_delayed in trace_dmu.h
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This change was missed in 0735ecb33485e91a78357a274e47c2782858d8b9.
+
+Reviewed-by: Fabian Grünbichler <f.gruenbich...@proxmox.com>
+Reviewed-by: Brian Behlendorf <behlendo...@llnl.gov>
+Reviewed-by: Giuseppe Di Natale <dinata...@llnl.gov>
+Signed-off-by: András Korn <korn-github....@elan.rulez.org>
+Closes #7096
+
+Signed-off-by: Thomas Lamprecht <t.lampre...@proxmox.com>
+---
+ include/sys/trace_dmu.h | 11 ++++++-----
+ 1 file changed, 6 insertions(+), 5 deletions(-)
+
+diff --git a/include/sys/trace_dmu.h b/include/sys/trace_dmu.h
+index 5ae59e563..24e57f514 100644
+--- a/include/sys/trace_dmu.h
++++ b/include/sys/trace_dmu.h
+@@ -50,7 +50,7 @@ DECLARE_EVENT_CLASS(zfs_delay_mintime_class,
+           __field(uint64_t,                   tx_lastsnap_txg)
+           __field(uint64_t,                   tx_lasttried_txg)
+           __field(boolean_t,                  tx_anyobj)
+-          __field(boolean_t,                  tx_waited)
++          __field(boolean_t,                  tx_dirty_delayed)
+           __field(hrtime_t,                   tx_start)
+           __field(boolean_t,                  tx_wait_dirty)
+           __field(int,                        tx_err)
+@@ -62,7 +62,7 @@ DECLARE_EVENT_CLASS(zfs_delay_mintime_class,
+           __entry->tx_lastsnap_txg            = tx->tx_lastsnap_txg;
+           __entry->tx_lasttried_txg           = tx->tx_lasttried_txg;
+           __entry->tx_anyobj                  = tx->tx_anyobj;
+-          __entry->tx_waited                  = tx->tx_waited;
++          __entry->tx_dirty_delayed           = tx->tx_dirty_delayed;
+           __entry->tx_start                   = tx->tx_start;
+           __entry->tx_wait_dirty              = tx->tx_wait_dirty;
+           __entry->tx_err                     = tx->tx_err;
+@@ -70,11 +70,12 @@ DECLARE_EVENT_CLASS(zfs_delay_mintime_class,
+           __entry->min_tx_time                = min_tx_time;
+       ),
+       TP_printk("tx { txg %llu lastsnap_txg %llu tx_lasttried_txg %llu "
+-          "anyobj %d waited %d start %llu wait_dirty %d err %i "
++          "anyobj %d dirty_delayed %d start %llu wait_dirty %d err %i "
+           "} dirty %llu min_tx_time %llu",
+           __entry->tx_txg, __entry->tx_lastsnap_txg,
+-          __entry->tx_lasttried_txg, __entry->tx_anyobj, __entry->tx_waited,
+-          __entry->tx_start, __entry->tx_wait_dirty, __entry->tx_err,
++          __entry->tx_lasttried_txg, __entry->tx_anyobj,
++          __entry->tx_dirty_delayed, __entry->tx_start,
++          __entry->tx_wait_dirty, __entry->tx_err,
+           __entry->dirty, __entry->min_tx_time)
+ );
+ /* END CSTYLED */
diff --git a/zfs-patches/0037-Tag-zfs-0.7.11.patch 
b/zfs-patches/0037-Tag-zfs-0.7.11.patch
new file mode 100644
index 0000000..22a3676
--- /dev/null
+++ b/zfs-patches/0037-Tag-zfs-0.7.11.patch
@@ -0,0 +1,56 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Tony Hutter <hutt...@llnl.gov>
+Date: Thu, 13 Sep 2018 10:13:41 -0700
+Subject: [PATCH] Tag zfs-0.7.11
+
+META file and changelog updated.
+
+Signed-off-by: Tony Hutter <hutt...@llnl.gov>
+Signed-off-by: Thomas Lamprecht <t.lampre...@proxmox.com>
+---
+ META                         | 2 +-
+ rpm/generic/zfs-kmod.spec.in | 3 +++
+ rpm/generic/zfs.spec.in      | 3 +++
+ 3 files changed, 7 insertions(+), 1 deletion(-)
+
+diff --git a/META b/META
+index 89525ac8a..4b0cdb9c0 100644
+--- a/META
++++ b/META
+@@ -1,7 +1,7 @@
+ Meta:         1
+ Name:         zfs
+ Branch:       1.0
+-Version:      0.7.10
++Version:      0.7.11
+ Release:      1
+ Release-Tags: relext
+ License:      CDDL
+diff --git a/rpm/generic/zfs-kmod.spec.in b/rpm/generic/zfs-kmod.spec.in
+index 8306ea76d..d4746f5bb 100644
+--- a/rpm/generic/zfs-kmod.spec.in
++++ b/rpm/generic/zfs-kmod.spec.in
+@@ -191,6 +191,9 @@ chmod u+x 
${RPM_BUILD_ROOT}%{kmodinstdir_prefix}/*/extra/*/*/*
+ rm -rf $RPM_BUILD_ROOT
+ 
+ %changelog
++* Thu Sep 13 2018 Tony Hutter <hutt...@llnl.gov> - 0.7.11-1
++- Released 0.7.11-1, detailed release notes are available at:
++- https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.7.11
+ * Wed Sep 05 2018 Tony Hutter <hutt...@llnl.gov> - 0.7.10-1
+ - Released 0.7.10-1, detailed release notes are available at:
+ - https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.7.10
+diff --git a/rpm/generic/zfs.spec.in b/rpm/generic/zfs.spec.in
+index 76953aeca..fa6f15714 100644
+--- a/rpm/generic/zfs.spec.in
++++ b/rpm/generic/zfs.spec.in
+@@ -371,6 +371,9 @@ systemctl --system daemon-reload >/dev/null || true
+ %endif
+ 
+ %changelog
++* Thu Sep 13 2018 Tony Hutter <hutt...@llnl.gov> - 0.7.11-1
++- Released 0.7.11-1, detailed release notes are available at:
++- https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.7.11
+ * Wed Sep 05 2018 Tony Hutter <hutt...@llnl.gov> - 0.7.10-1
+ - Released 0.7.10-1, detailed release notes are available at:
+ - https://github.com/zfsonlinux/zfs/releases/tag/zfs-0.7.10
diff --git a/zfs-patches/series b/zfs-patches/series
index 18cec2a..bed145e 100644
--- a/zfs-patches/series
+++ b/zfs-patches/series
@@ -32,3 +32,6 @@
 0032-Fix-build-with-CONFIG_GCC_PLUGIN_RANDSTRUCT.patch
 0033-Correctly-handle-errors-from-kern_path.patch
 0034-Tag-zfs-0.7.10.patch
+0035-Revert-zpool-reopen-should-detect-expanded-devices.patch
+0036-tx_waited-tx_dirty_delayed-in-trace_dmu.h.patch
+0037-Tag-zfs-0.7.11.patch
-- 
2.11.0


_______________________________________________
pve-devel mailing list
pve-devel@pve.proxmox.com
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-devel

Reply via email to