Am 23.11.21 um 14:34 schrieb Ralf Storm: > Hello, > > > yes - I have a problem, as mentioned in my first mail, the system is stuck at > boot with this message > and then after a few minutes reboots...
Can you reboot with the previous kernel and check the firmware of the controller? dmesg | grep mpt | grep -i fw should show the firmware version. > > > Am 23/11/2021 um 14:14 schrieb Uwe Sauter: >> Am 23.11.21 um 14:04 schrieb Ralf Storm: >>> Hello, >>> >>> I´m currently upgrading my 7-node Cluster, 1 node without problems, 2 nodes >>> had renamed NICs to be >>> corrected, >>> >>> but the last Node stucks at boot with this message: "mpt2sas_cm0: overiding >>> NVDATA EEDPTagMode >>> setting" >>> >>> Anybody had this error before? >> Yes, unrelated to Proxmox. But the SAS controller works fine even with this >> message. >> >> Do you have issues accessing your storage? >> >>> Best regards >>> >> >> _______________________________________________ >> pve-user mailing list >> [email protected] >> https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ pve-user mailing list [email protected] https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
