--- Begin Message ---
Hi,
El 19/5/22 a las 18:50, Eneko Lacunza via pve-user escribió:
El 19/5/22 a las 18:31, Stoiko Ivanov escribió:
Today we installed PVE 7.1 (ISO) in a relatively old machine.
any more details on what kind of machine this is
(CPU generation, if it's an older HP/Dell/Supermicro server or
consumerhardware)?
The system is in a customer site, but I'll try to gather detailed data
tomorrow. CPU is a Xeon E or E3, I can't recall exact model right now.
Server has Asus motherboard; this puts it in consumerserver or
something like that I guess :-)
System is:
Asus P10S-C BIOS 4402
Xeon E3-1270 v6 3.8
lspci shows card as:
Broadcom / LSI MegaRAID SAS-3 3008 [Fury]
Kernel will print lots of messages like
"DMAR: DRHD: handling fault status reg 3"
"DMAR: [DMA Read NO_PASID] Request device [02:00.0] fault ???? 4b311000
[fault reason 0x06] PTE Readaccess is not set.
could you please try (in that order, and until one the suggestions fixes
the issue):
* adding `iommu=pt` to the kernel cmdline
* adding `intel_iommu=off` to the kernel cmdline
we have updated the known-issues section of the release-notes to suggest
this already after a few similar reports with older hardware/unusual
setups in our community forum:
https://pve.proxmox.com/wiki/Roadmap#7.2-known-issues
Ok, I didn't notice those known issues, will check them next time. I
think I will be unable to try this shortly as system is not local, but
if I can will report back, thanks.
This fixes the issue (iommu=pt). Thanks a lot for pointing this out.
Regards
Eneko Lacunza
Zuzendari teknikoa | Director técnico
Binovo IT Human Project
Tel. +34 943 569 206 |https://www.binovo.es
Astigarragako Bidea, 2 - 2º izda. Oficina 10-11, 20180 Oiartzun
https://www.youtube.com/user/CANALBINOVO
https://www.linkedin.com/company/37269706/
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
