--- Begin Message ---
Hi,
You have in datacenter options "Migrations Settings", where you can set
the migration network.
Cheers
El 15/12/22 a las 8:23, Uwe Sauter escribió:
Good morning,
I'm currently replacing one PVE cluster with another. The new hardware has a
bunch of different
network interfaces that I want to use to separate VM traffic from
Corosync/Ceph/migration traffic.
Is there a way to configure the interface/network that is used for migration or
does this depend on
the combination of hostname resolution and which hostname was used to create
the cluster?
(I have various hostnames configured per host, for each configured network one,
so that I can
explicitly choose which interface I use to connect to a host.)
Regards,
Uwe
Interface configuration:
eno1np0 --+-- untagged VLAN X -- Corosync ring 1/management network
(192.168.1.0/24)
eno2np1 N/C
enp3s0 --+
+-- bond0 --+-- bond0.100 -- vmbr100 \
enp4s0 --+ +-- bond0.101 -- vmbr101 +-- VM traffic
+-- bond0.102 -- vmbr102 /
enp5s0 --+
+-- bond1 --+-- untagged VLAN Y -- Corosync ring 0/Ceph
(172.16.1.0/24)
enp6s0 --+
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
Eneko Lacunza
Zuzendari teknikoa | Director técnico
Binovo IT Human Project
Tel. +34 943 569 206 |https://www.binovo.es
Astigarragako Bidea, 2 - 2º izda. Oficina 10-11, 20180 Oiartzun
https://www.youtube.com/user/CANALBINOVO
https://www.linkedin.com/company/37269706/
--- End Message ---
_______________________________________________
pve-user mailing list
[email protected]
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
