I've upgraded a server from PVE7 to PV8, and (as expected) some interfaces
get renamed.
Really, i've upgraded TWO identical server (Dell T440), and one went
flawlessy, the other... and interface get NOT renamed, remain 'eth1':
root@svpve2:~# ip link show eth1
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT
group default qlen 1000
link/ether 5c:6f:69:0f:99:79 brd ff:ff:ff:ff:ff:ff
altname enp1s0f1
I've tried:
root@svpve2:~# ip -force link set dev eth1 name ens1f1
RTNETLINK answers: File exists
and:
root@svpve2:~# ip link property add dev eth1 altname ens1f1
RTNETLINK answers: File exists
but nothing work; there's something i can do whithout rebooting the server?
Thanks.
PS: port is on a dual-port pcie card, the other port on the same card works as
expected:
root@svpve2:~# ip link show ens1f0
2: ens1f0: <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> mtu 1500 qdisc mq master
bond0 state UP mode DEFAULT group default qlen 1000
link/ether f4:ee:08:24:3a:ff brd ff:ff:ff:ff:ff:ff permaddr
5c:6f:69:0f:99:78
altname enp1s0f0
--
_______________________________________________
pve-user mailing list
pve-user@lists.proxmox.com
https://lists.proxmox.com/cgi-bin/mailman/listinfo/pve-user
