we are also not expecting too much traffic from outside as we are
designing it for only 15 to 20 customers means same number of virtual
machines and i think 3.5GHz Xeon processor will be enough for handling
queries.

On Mon, Mar 25, 2013 at 3:14 PM, Ola Karlsson <[email protected]> wrote:
> My development environment runs on a Supermicro X9SCM-F-O with the Intel C204 
> chipset and a 1230v2 CPU.
> I haven't had a single problem since installation 8 months ago.
> It is however in a home environment so the load on the VMs are very low.
>
> BR Ola
>
>
> -----Ursprungligt meddelande-----
> Från: [email protected] 
> [mailto:[email protected]] För Muhammad Yousuf Khan
> Skickat: den 25 mars 2013 10:53
> Till: [email protected]
> Ämne: [PVE-User] Asus P8B-M compatibility with Proxmox 2.x
>
> i wanted to implement a micro data center specially for demo only to our 
> customers in US office and i have selected "Asus P8B-M (Intel C204 mATX)" 
> this mother board is there anyone working with this model as i am  a bit 
> confuse i had a Intel board with i7 processor and it gave me the kernal panic 
> messages it runs for a day or two and then hand after kernal messages but 
> unfortunately i haven't got enough time to see and rectify the issue as i 
> didn't get enough time.
>
> Now my company asking me to implement micro/tiny data center  as it will cost 
> less and we need about 5 to 6 server.
>
> i found this motherboard Asus P8B-M with Intel E3-1225 v2 Processor, do you 
> think it is fine to go with, because i live in a different country and 
> working and rectifying issues with less kernel troubleshooting experience and 
> additionally support from remote country means lot of pain. would you please 
> guide me ....
>
> Thanks,
> _______________________________________________
> pve-user mailing list
> [email protected]
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Reply via email to