Hi Fabrizio, Our configuration works perfectly, that's not the problem.
I'm asking how to configure more that one monitor for the Proxmox storage :) El vie, 28-06-2013 a las 17:04 +0200, Fabrizio Cuseo escribió: > I think that is not the correct configuration; as you can see on the wiki > page http://pve.proxmox.com/wiki/Storage:_Ceph , you can't use the proxmox > host as part of the ceph cluster. > > To resolve the issue without the need of other servers for the ceph storage, > I have done this setup: > > - Proxmox host A - 2 raid-1 disks with proxmox > - 2 local disks configured as LVM local storage, not shared > - Qemu VM with Ceph cluster server, using local proxmox storage for the > OS, and the 2 LVM disk storage for Ceph storage > > > With 3 of theese hosts, I have: > a full working proxmox cluster with 3 nodes > a full working ceph cluster with 3 nodes > > All the VMS that I have on the cluster can use the ceph shared storage. > > I know that is not the best setup for performances, but is really ceaph. > > Regards, Fabrizio > > > > > > > ----- Messaggio originale ----- > Da: "Eneko Lacunza" <[email protected]> > A: "Fabrizio Cuseo" <[email protected]> > Cc: [email protected] > Inviato: Venerdì, 28 giugno 2013 16:51:09 > Oggetto: Re: [PVE-User] Configuring ceph storage > > Hi Fabrizio, > > El vie, 28-06-2013 a las 16:48 +0200, Fabrizio Cuseo escribió: > > How is configured your ceph cluster ? > > The phisical proxmox node is also the ceph cluster node, or do you have a > > VM running on every node, with local storage, that is part of the ceph > > cluster ? > > The physical proxmox nodes is also the ceph cluster node. > > > > > Fabrizio > > > > ----- Messaggio originale ----- > > Da: "Eneko Lacunza" <[email protected]> > > A: [email protected] > > Inviato: Venerdì, 28 giugno 2013 16:41:22 > > Oggetto: [PVE-User] Configuring ceph storage > > > > Hi all, > > > > We're performing some tests with cepth storage and Proxmox. > > > > We noticed that there is a mandatory monitor server field. Is it > > possible to configure more that one? We tried: > > > > - server1,server2 -> seems to give error on VM startup > > - server1 server2 -> VM startup ok > > - server1;server2 -> VM startup ok > > > > Our Proxmox nodes are running also the ceph cluster, so it could be that > > qemu is using system-wide cepth configuration. > > > > Thanks a lot > > Eneko > > > > -- > > Zuzendari Teknikoa / Director Técnico > > Binovo IT Human Project, S.L. > > Telf. 943575997 > > 943493611 > > Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa) > > www.binovo.es > > > > _______________________________________________ > > pve-user mailing list > > [email protected] > > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > -- > Zuzendari Teknikoa / Director Técnico > Binovo IT Human Project, S.L. > Telf. 943575997 > 943493611 > Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa) > www.binovo.es > > -- Zuzendari Teknikoa / Director Técnico Binovo IT Human Project, S.L. Telf. 943575997 943493611 Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa) www.binovo.es _______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
