Hi there, I have the same problem, I have to reboot electrically the server almost every day (two times today already).
I have nothing in the logs, the server just hangs. Has a solution been found ? Thanks. Le 27/07/2013 14:26, Amand Tihon a écrit : > Hi, > > Has a solution or workaround been found ? I'm also seeing my EX40 hanging, > but > I don't have access to the hetzner forum yet (my account must still be > activated). > > Thanks. > > Amand. > > Le jeudi 18 juillet 2013 16:05:09 a écrit : >> Hi Martin, >> >> same Problem. 2.6.32-22-pve is running but hangs after a short period of >> time, no log entries. After a reset the server comes up again. >> I've no idea if a installation is impossible or not, we're using wheezy >> on the base. Based on this tut: >> http://pve.proxmox.com/wiki/Install_Proxmox_VE_on_Debian_Wheezy >> >> chris >> >> Am 18.07.13 15:06, schrieb Martin Maurer: >>> Pls test with latest 2.6.32-22 kernel, see >>> http://forum.proxmox.com/threads/14269-No-Installation-possible-Haswell-Xe >>> on-1225v3-X10SLM-F-Supermicro >>> >>> >>> >>> Martin >>> >>> >>> >>> *From:*pve-user-bounces at pve.proxmox.com >>> [mailto:pve-user-bounces at pve.proxmox.com] *On Behalf Of *Christain >>> Blaich *Sent:* Donnerstag, 18. Juli 2013 11:33 >>> *To:* pve-user at pve.proxmox.com >>> *Subject:* [PVE-User] Problems with running Pve under the New Hetzner >>> Rootserver Generation with Haswell >>> >>> >>> >>> Hey, >>> >>> I got a new RootServer from the new Hetzner Generation called EX40 >>> http://www.hetzner.de/hosting/produktmatrix/rootserver-produktmatrix-ex >>> Unfortunately the Server does not start with 2.6.32-20-pve stable. >>> 2.6.32-21-pve dev is running but hangs after a short period of time, >>> no log entries. After a reset the server comes up again. >>> 2.6.32-22-pve dev same like 21. >>> >>> model name : Intel(R) Core(TM) i7-4770 CPU @ 3.40GHz >>> root at Debian-70-wheezy-64-minimal ~ # lspci >>> 00:00.0 Host bridge: Intel Corporation Haswell DRAM Controller (rev 06) >>> 00:02.0 VGA compatible controller: Intel Corporation Haswell >>> Integrated Graphics Controller (rev 06) >>> 00:14.0 USB controller: Intel Corporation Lynx Point USB xHCI Host >>> Controller (rev 04) >>> 00:16.0 Communication controller: Intel Corporation Lynx Point MEI >>> Controller #1 (rev 04) >>> 00:1a.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host >>> Controller #2 (rev 04) >>> 00:1c.0 PCI bridge: Intel Corporation Lynx Point PCI Express Root Port >>> #1 (rev d4) >>> 00:1c.3 PCI bridge: Intel Corporation 82801 PCI Bridge (rev d4) >>> 00:1d.0 USB controller: Intel Corporation Lynx Point USB Enhanced Host >>> Controller #1 (rev 04) >>> 00:1f.0 ISA bridge: Intel Corporation Lynx Point LPC Controller (rev 04) >>> 00:1f.2 SATA controller: Intel Corporation Lynx Point 6-port SATA >>> Controller 1 [AHCI mode] (rev 04) >>> 00:1f.3 SMBus: Intel Corporation Lynx Point SMBus Controller (rev 04) >>> 02:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI >>> Bridge (rev 03) >>> 03:00.0 Ethernet controller: Intel Corporation 82541PI Gigabit >>> Ethernet Controller (rev 05) >>> >>> Hw should be ok and is tested. Other useres are fighting with the same >>> errors. >>> See http://forum.hetzner.de/wbb2/thread.php?threadid=20291 >>> >>> Any Ideas ? >>> >>> Thx, chris >> >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> <http://pve.proxmox.com/pipermail/pve-user/attachments/20130718/14e2a050/at >> tachment.html> > _______________________________________________ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > -- Marc _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
