You don't need a VPN Follow the guides on my site this will give you a secure and optimized proxmox.
Set proxmox admin interface to only listen locally (127.0.0.1) and connect via an ssh tunnel to port 8006. No offense, but this should be standard knowledge for an admin. Guides on https://extremeshok.com/blog Sent from my iPhone > On 14 Sep 2014, at 6:44 PM, Bart Lageweg | Bizway <b...@bizway.nl> wrote: > > Hi Gerald, > > Use Eth0 for internal network + VPN access. > Use Eth1 for internet access (no IP in interface, only create for bridge) > > Goodluck > > Bart > > > -----Oorspronkelijk bericht----- > Van: pve-user [mailto:pve-user-boun...@pve.proxmox.com] Namens Gerald Brandt > Verzonden: zondag 14 september 2014 18:41 > Aan: pve-user@pve.proxmox.com > Onderwerp: [PVE-User] Internet facing Proxmox > > Hi, > > I've been asked to set up a Proxmox server on the Internet. Has anybody done > so, and how secure is the web interface on port 8006? > > I was considering running a VPN on Proxmox, and not allowing port 8006 access > unless you were connected to the VPN. That creates issues if the VPN server > goes down. > > Also, with the new built in firewall, how easy is it to run all VPN's on a > private address space and port forward as needed? > > Gerald > > _______________________________________________ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ > pve-user mailing list > pve-user@pve.proxmox.com > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
