Hello,
i reinstalled proxmox 4.0 and took over the /etc/network/interface file from my
3.4 installation.
So far it is running well.
But if i want to change a network setting via the network GUI I get an error
message:
bridge 'vmbr41' - unable to find port 'eth0.41' (500)
A test adding the lines "auto eth0.41" and "auto eth0.77" solves the problem
but is not necessary for debian itself.
The current interfaces-file contains:
------------------ cut -----------------------
auto lo
iface lo inet loopback
auto eth0
auto vmbr41
iface vmbr41 inet static
address xxx.xxx.1.164
netmask 255.255.255.0
bridge_ports eth0.41
bridge_stp off
bridge_fd 0
auto vmbr77
iface vmbr77 inet static
address xxx.xxx.0.164
netmask 255.255.255.0
gateway xxx.xxx.0.254
bridge_ports eth0.77
bridge_stp off
bridge_fd 0
------------------ cut -----------------------
So - whenever i want to add a VLAN bridge a line "auto eth0.<vlan>" must be
previously added to the interfaces file.
Or must such things be done in another way now ?
Kind regards
Petric
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
