I really appreciate that Thanks Eneko And thanks to everyone for helping. Thanks, Yousuf
On Tue, Dec 22, 2015 at 1:38 PM, Eneko Lacunza <[email protected]> wrote: > Hi Muhammad, > > I have currently the following in production: > > (Proxmox VMs on ceph storage, RAID only for boot/root/swap partition) > - PERC H200A - no battery > - IBM ServeRAID 8k (Adaptec) 256MB BBC > - PERC H730 1GB NV > - PERC H710 512MB NV > > (RAID for VMs and system) > - PERC H710 512MB NV > > Try to avoid PERC H310, I had reliability issues with drivers in > 2.6.32/3.10 kernels (it would work/not work randomly on each reboot) > > Cheers > Eneko > > El 18/12/15 a las 14:32, Muhammad Yousuf Khan escribió: > > Thanks Eneko and Admin. > > Can you please mention which RAID card you are using? > > Thanks, > MYK > > On Fri, Dec 18, 2015 at 4:51 PM, <[email protected]> > [email protected] <[email protected]> wrote: > >> Some of the new raid controllers replaced the battery with a ssd. >> >> With proper hardware raid, your raid should be transparent to the OS. >> >> We have been using proxmox with proper hardware raid for years. >> >> Sent from my iPhone >> >> > On 18 Dec 2015, at 12:26 PM, Eneko Lacunza < <[email protected]> >> [email protected]> wrote: >> > >> > Hi Muhammad, >> > >> >> El 17/12/15 a las 19:32, Muhammad Yousuf Khan escribió: >> >> I have been using Proxmox for so long this is my first time that i may >> need to use Hardware RAID instead of MDADM, Just asking for my knowledge as >> i we are planning to buy a raid controller.how do you guys recommend >> installing Hardware RAID. regardless of fake or true RAID. >> >> >> >> I am asking this because there are two methods of installing Proxmox >> (a) first install debian, (b) then installing PVE kernel. >> >> >> >> However the 2nd type of installation is via ISO image. and i am >> mostly using the first method with software RAID or ZFS. this is my first >> time i am looking into Hardware raid installation. >> >> >> >> so which method do you guys prefer? >> >> >> >> I can see Debian Jessie has the driver for my RAID CARD. >> >> >> >> here is the model HP DL380 >> >> https://wiki.debian.org/HP/ProLiant >> >> >> >> >> >> any sharing knowledge will be highly appreciated. >> > I always use ISO image, except when I need to do something not >> supported by it (i.e. softraid ;) ). >> > >> > Please, do not use fakeRAID. If you're using RAID card for performance >> reasons, use one with battery backed/NV cache. >> > >> > Cheers >> > Eneko >> > >> > -- >> > Zuzendari Teknikoa / Director Técnico >> > Binovo IT Human Project, S.L. >> > Telf. 943575997 >> > 943493611 >> > Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun (Gipuzkoa) >> > www.binovo.es >> > >> > _______________________________________________ >> > pve-user mailing list >> > [email protected] >> > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> _______________________________________________ >> pve-user mailing list >> [email protected] >> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> > > > > _______________________________________________ > pve-user mailing > [email protected]http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > > > > -- > Zuzendari Teknikoa / Director Técnico > Binovo IT Human Project, S.L. > Telf. 943575997 > 943493611 > Astigarraga bidea 2, planta 6 dcha., ofi. 3-2; 20180 Oiartzun > (Gipuzkoa)www.binovo.es > > > _______________________________________________ > pve-user mailing list > [email protected] > http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > >
_______________________________________________ pve-user mailing list [email protected] http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
