Just to check, since I don't have a key for the Enterprise repositories,
should I use the repositories from here ? :
http://pve.proxmox.com/wiki/Package_repositories#Proxmox_VE_No-Subscription_Repository
Thanks,
Laurent
On 4/24/2016 3:03 PM, Ralf wrote:
Some Western Digital Green stuff:
[ 2.406419] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AADS-0
0A01 PQ: 0 ANSI: 5
[ 2.406766] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 2.406794] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 2.406845] sd 2:0:0:0: [sda] Write Protect is off
[ 2.406848] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.406884] sd 2:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 2.407121] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AADS-0
0A01 PQ: 0 ANSI: 5
[ 2.407342] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500
GB/466 GiB)
[ 2.407417] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 2.407424] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.407428] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.407459] sd 3:0:0:0: [sdb] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
According to google, that's a Western Digital Green 500GB, S-ATA 300,
32MiB Cache
Ralf
On 04/24/2016 08:57 PM, Christian Kivalo wrote:
Am 24. April 2016 19:51:21 MESZ, schrieb Ralf <[email protected]>:
Hi,
zil.. That's an additional ZFS cache, right?
Shouldn't it be slightly faster, even without additional caches?
The ZIL is used for writes. Not for reads.
That will not help with your slow reads.
It should be faster even without caches.
What drives are you using?
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
[email protected]
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
