Greetings to all! I'm jumped by some week in the Proxmox world, i'm still experimenting a bit doing some test P2V migration, so, excuse me if ask dumb question...
As stated in subject, my system (for now two nodes, HP ProLiant ML150 Gen9) use the SAN HP MSA 1040; that SAN have two controller, with two network port (gigabit ethernet, in mine) per controller. To provide redundancy and more bandwidth, i use 'multipath', configured following the wiki: https://pve.proxmox.com/wiki/ISCSI_Multipath First note:that wiki page i think misses a note: you have to create a LVM on the iSCSI target (creating it before adding to multipath conf) or doing by hand, as found here (#12): https://forum.proxmox.com/threads/multipath-iscsi.2808/ All works like a charm, but i have two little trouble, and i've not found in wiki info about. 1) probably not a proxmox issue, but... if i reboot a node, sometime multipath does not setup correctly. A simple 'systemctl restart multipath' fix the issue but... i think there's some parameter i can tweak to behave correctly. In the meantime, i've put the restart on rc.local. 2) i've not found a way to setup correctly the volume to accept .qcow disks, eg i've followed: http://pve.proxmox.com/wiki/Storage_Model#LVM_Groups_with_Network_Backing but the volumes created accept only RAW disk format. There's some way to make a iSCSI target accept other format? Thanks. -- dott. Marco Gaiarin GNUPG Key ID: 240A3D66 Associazione ``La Nostra Famiglia'' http://www.lanostrafamiglia.it/ Polo FVG - Via della Bontà , 7 - 33078 - San Vito al Tagliamento (PN) marco.gaiarin(at)lanostrafamiglia.it t +39-0434-842711 f +39-0434-842797 Dona il 5 PER MILLE a LA NOSTRA FAMIGLIA! http://www.lanostrafamiglia.it/25/index.php/component/k2/item/123 (cf 00307430132, categoria ONLUS oppure RICERCA SANITARIA) _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user