Hi Daniel,

You can move the config files trough /etc/pve/node etc in the right dir 

Verstuurd vanaf mijn iPhone

> Op 26 mei 2016 om 23:20 heeft Daniel Eschner <dan...@linux-nerd.de> het 
> volgende geschreven:
> 
> Configurationfiles and LVM still exist in the Host-System.
> 
>  ACTIVE            '/dev/pve/vm-100-disk-1' [20.00 GiB] inherit
>  ACTIVE            '/dev/pve/vm-101-disk-1' [50.00 GiB] inherit
> 
> Just proxmox need to know the the VM is located on that server ;)
> 
> 
>> Am 26.05.2016 um 23:09 schrieb Daniel Eschner <dan...@linux-nerd.de>:
>> 
>> Hi All,
>> 
>> i played a bit with the HA feature. It seems now i damaged 2 VMs which are 
>> located on the local LVM-THIN
>> After i placed the nodes in the HA and rebootet the Host-Systems all VMs has 
>> been migrated to another Host which is OK but now i am not able to start the 
>> VM or not able to migrate it back to host01 where the nodes was located 
>> before.
>> 
>> When i start the Migration i get these errors:
>> 
>> May 26 23:04:10 starting migration of CT 100 to node 'host01' (10.0.2.110)
>> May 26 23:04:10 copy mountpoint 'rootfs' (local-lvm:vm-100-disk-1) to node ' 
>> host01'
>> May 26 23:04:10 ERROR: unable to migrate 'local-lvm:vm-100-disk-1' to 
>> 'local-lvm:vm-100-disk-1' on host '10.0.2.110' - source type 'lvmthin' not 
>> implemented
>> May 26 23:04:10 aborting phase 1 - cleanup resources
>> May 26 23:04:10 start final cleanup
>> May 26 23:04:10 ERROR: migration aborted (duration 00:00:00): unable to 
>> migrate 'local-lvm:vm-100-disk-1' to 'local-lvm:vm-100-disk-1' on host 
>> '10.0.2.110' - source type 'lvmthin' not implemented
>> TASK ERROR: migration aborted
>> 
>> When i try to start i get the following error:
>> 
>> lxc-start: lxc_start.c: main: 344 The container failed to start.
>> lxc-start: lxc_start.c: main: 346 To get more details, run the container in 
>> foreground mode.
>> lxc-start: lxc_start.c: main: 348 Additional information can be obtained by 
>> setting the --logfile and --logpriority options.
>> TASK ERROR: command 'lxc-start -n 100' failed: exit code 1
>> 
>> It seems that it happend because its not a shared storage.
>> 
>> Is there anyway to fix the problem then i can run my VMs again? ;)
>> 
>> P.S. The VM in my shared Ceph Storage works fine.
>> 
>> 
>> Cheers
>> 
>> Daniel
>> _______________________________________________
>> pve-user mailing list
>> pve-user@pve.proxmox.com
>> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
> 
> _______________________________________________
> pve-user mailing list
> pve-user@pve.proxmox.com
> http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
_______________________________________________
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user

Reply via email to