Hi,
I have a MSA2312 connected with 1gbit to a 3 node PVE 4.2 Cluster.
I managed to get ISCSI and LVM working and attached it to a VM.
Atm I didn't manage to get multipath working with PVE because the
Wikipage tells me how to create multipath (which works) but not how PVE
uses it for LVM VGs... maybe someone give me a hint.
Anyway the main problem is that fio only gives me a read performance of
5 mb/s if I attach a disk as virtio or scsi device with cache "Writeback".
If I attach the same SAN Drive directly in the VM with iSCSI (with and
without multipath) I get about 112 MB/s.
I also get this speed on the pve host.
I use:
fio --filename=/dev/sdb --direct=1 --rw=read --bs=1m --size=20G
--numjobs=200 --runtime=60 --group_reporting --name=file1
for benchmarking.
While benchmarking the VM I see 1300% cpu usage on the host (mainly sys
time)
Maybe someone has a idea?
regards
--
Harald Leithner
ITronic
Wiedner Hauptstraße 120/5.1, 1050 Wien, Austria
Tel: +43-1-545 0 604
Mobil: +43-699-123 78 4 78
Mail: leith...@itronic.at | itronic.at
_______________________________________________
pve-user mailing list
pve-user@pve.proxmox.com
http://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
