Hello Dietmar ,
It seems that iscsi layer works but lvm does not.
Volume group "vg4" not found
TASK ERROR: can't activate LV '/dev/vg4/vm-6001-disk-1': Cannot process
volume group vg4
As soon as I remove VM that has image in zpool and reboot hostst ,
everything regarding iscsi-target-multipath works like before w/o any
data loss or something like that
Thank you in adavnce
BR
Tonci
--
/
/
/srdačan pozdrav / best regards/
Tonči Stipičević, dipl. ing. Elektr.
/direktor / manager/**
**
d.o.o.
ltd.
*podrška / upravljanje
**IT*/ sustavima za male i srednje tvrtke/
/Small & Medium Business
/*IT*//*support / management*
Badalićeva 27 / 10000 Zagreb / Hrvatska – Croatia
url: www.suma-informatika.hr
mob: +385 91 1234003
fax: +385 1 5560007
On 07/07/2017 17:17, Dietmar Maurer wrote:
Everything is VLAN-separated ... all three multipath links have its own
subnets and the link between zfs local storages uses its own
VLAN-separated link (actually vmbr1 -> intranet link )
Usually VLAN separation does not help to prevent network overload. Or do you
have some special switches which can guarantee minimum transfer rates?
Besides, I cannot see why replication (ssh/zfs) can disturb an iscsi connection.
What error do you get exactly on the iscsi connection?
_______________________________________________
pve-user mailing list
[email protected]
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
