Hi guys I set up a Linux Debian Box, with istgt installed. Here's the config for istgt:
[Global] Comment "Global section" NodeBase "iqn.2017-08.iscsi2.homegiba.com.br" PidFile /var/run/istgt.pid AuthFile /etc/istgt/auth.conf MediaDirectory /var/istgt LogFacility "local7" Timeout 30 NopInInterval 20 DiscoveryAuthMethod Auto MaxSessions 16 MaxConnections 4 MaxR2T 32 MaxOutstandingR2T 16 DefaultTime2Wait 2 DefaultTime2Retain 60 FirstBurstLength 262144 MaxBurstLength 1048576 MaxRecvDataSegmentLength 262144 InitialR2T Yes ImmediateData Yes DataPDUInOrder Yes DataSequenceInOrder Yes ErrorRecoveryLevel 0 [UnitControl] Comment "Internal Logical Unit Controller" Portal UC1 127.0.0.1:3261 Netmask 127.0.0.1 [PortalGroup1] Comment "PVE" Portal DA1 10.1.1.200:3260 [InitiatorGroup1] Comment "Initiator Group1" InitiatorName "ALL" [LogicalUnit1] Comment "Hard Disk Sample" TargetName disk1 TargetAlias "Data Disk1" Mapping PortalGroup1 InitiatorGroup1 AuthMethod Auto AuthGroup AuthGroup1 UseDigest Auto UnitType Disk LUN0 Storage /dev/zvol/datastore1/iscsi1 Auto I have set up the ssh key as well and I can log in using that key. Indee, I have sucessful add the ZFS Over iSCSI storage and I can see the disks. But when I try to add some disk when I create a VM I get the erro below: No configuration found. Install istgt on 10.1.1.200 at /usr/share/perl5/PVE/Storage/LunCmd/Istgt.pm line 99. (500) My istgt is running and up! What can I doing wrong in this case??? Thanks for any help. _______________________________________________ pve-user mailing list pve-user@pve.proxmox.com https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
