Sorry, I mixed up the IP addresses. MTU according to what you switch supports (in this case jumbo frames with 9000 bytes).
/etc/network/interfaces ----------------------------------------- # management interface auto eth0 iface eth0 inet static address 192.168.0.2 netmask 255.255.255.0 gateway 192.168.0.254 # 1st interface in bond auto eth1 iface eth1 inet manual mtu 9000 # 2nd interface in bond auto eth2 iface eth2 inet manual mtu 9000 # bond auto bond0 iface bond0 inet manual slaves eth1 eth2 bond-mode 802.3ad bond-miimon 100 mtu 9000 # interface for vlan 120 on bond with IP auto bond0.120 iface bond0.120 inet static address 10.100.100.8 netmask 255.255.255.0 mtu 9000 # interface for vlan 130 on bond without IP (just for VMs) auto bond0.130 iface bond0.130 inet manual ----------------------------------------- Am 23.08.2017 um 07:27 schrieb Uwe Sauter: > An example out of my head: > > > /etc/network/interfaces > ----------------------------------------- > # management interface > auto eth0 > iface eth0 inet static > address 10.100.100.8 > netmask 255.255.255.0 > gateway 10.100.100.254 > > # 1st interface in bond > auto eth1 > iface eth1 inet manual > mtu 9000 > > # 2nd interface in bond > auto eth2 > iface eth2 inet manual > mtu 9000 > > # bond > auto bond0 > iface bond0 inet manual > slaves eth1 eth2 > bond-mode 802.3ad > bond-miimon 100 > mtu 9000 > > # interface for vlan 120 on bond with IP > auto bond0.120 > iface bond0.120 inet static > address 192.168.123.2 > netmask 255.255.255.0 > mtu 9000 > > # interface for vlan 130 on bond without IP (just for VMs) > auto bond0.130 > iface bond0.130 inet manual > > ----------------------------------------- > > > Am 23.08.2017 um 06:44 schrieb Alexandre DERUMIER: >> Hi, >> >> you can create a bond0.120 interface and setup ip on it. >> >> (and keep bond0 in bridge). >> >> >> another way, enable "vlan aware" option in bridge. (see gui), >> >> then you can create a >> >> vmbr0.120, and setup ip on it. >> >> >> ----- Mail original ----- >> De: "Devin Acosta" <[email protected]> >> À: "proxmoxve" <[email protected]> >> Envoyé: Mercredi 23 Août 2017 03:40:07 >> Objet: [PVE-User] Proxmox 5 (LACP/Bridge/VLAN120) >> >> I need to configure Proxmox 5.x with the following. >> >> Bond of 2 interfaces using LACP >> Bridge off Bond0, with IP on VLAN 120 (10.100.100.8/24) >> The network switch doesn’t have native VLAN, so the IP has to be on the >> TAGGED VLAN 120. >> >> Please help. ;) >> >> Devin >> _______________________________________________ >> pve-user mailing list >> [email protected] >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> >> _______________________________________________ >> pve-user mailing list >> [email protected] >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >> > _______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
