2017-09-20 12:24 GMT-03:00 Jean-mathieu CHANTREIN < [email protected]>:
> Hi Silvestre. > > Thanks for your reply. > > I don't want to make a bond, I want to use just one physical interface for > traffic off at least 2 isolate subnetwork behind at least 2 virtual bridge. > my bad... I see slowly your mail and got the idea. But I think that the two premises are excludents. You want to do some but you don want to do this with proxmox rules lol (joke tone) my know-how about that is limited for my expirience... maybe somebody at list can help better than me. Anyway I hope that my entromision has been a good try for help :) > It's perfectly work when I use just one virtual bridge on one physical > interface. I just want to add another subnetwork to the virtual bridge or > an another virtual bridge behind the same physical interface than the first > virtual bridge. > > But, with your answers I have a doubt, can I have setup vlan on a virtual > bridge ? > mmm actually I have not references to do it.. not from UI.. At /etc/network/interfaces config file you can specify some things like this. I dont known if the vlan option for vmbr (bridge) is compatible with proxmox.. at UI this not appear as an option. > > Sorry for my english to. > > Regards. > > Jean-Mathieu > > ----- Mail original ----- > > De: "Silvestre Figueroa" <[email protected]> > > À: "pve-user" <[email protected]> > > Envoyé: Mercredi 20 Septembre 2017 16:54:23 > > Objet: Re: [PVE-User] Multiple bridge on single physical interface > > > Hi Jean! > > > > 2017-09-20 11:37 GMT-03:00 Jean-mathieu CHANTREIN < > > [email protected]>: > > > >> Hello. > >> > >> I try to make this: > >> > >> (1) > >> <physical_interface0>-----<vmbr0>-----<subnetwork1> > >> | > >> |--------------------<vmbr1>-----<subnetwork2> > >> > >> But apparently, one physical interface can't have 2 virtual bridge. So I > >> try this: > >> > >> (2) > >> <physical_interface0>-----<vmbr0>-----<subnetwork1> > >> | > >> <virtual_interface_on_physical_interface0>---------- > >> ----------<vmbr1>-----<subnetwork2> > >> > >> But my virtual interface is not recognize, because I have to fixe an ip > >> address to the virtual interface and I don't want make this trick. > >> > >> Globally, I want to make this: > >> > >> |-----<host1> > >> | |-----<physical_interface0>-----<vmbr0>-----<subnetwork1> > >> | | > >> | |--------------------<vmbr1>-----<subnetwork2> > >> | > >> |-----<host2> > >> | |-----<physical_interface0>-----<vmbr0>-----<subnetwork1> > >> | | > >> | |--------------------<vmbr1>-----<subnetwork2> > >> | > >> |-----<host...> > >> ... > >> > >> > >> VM in subnetwork1(resp.2) on host1 must be communicate with VM in > >> subnetwork1(resp.2) on host2 via just one single interface and my host > must > >> be not reacheable by subnetwork. > >> > >> How I can make this ? > >> > > > > > > if i understood correctly, you need to use single ethernet interface as a > > trunk. > > > > If you have a L3 switch with vlans support, you can make a bond to eth > > interface, then assign the bond to a single vmbr and use this vmbr in all > > your vms. > > > > When configuring the VM network, you can specify different vlan tag to > > separate the networks at server side. > > > > Then, at Switch side, you must to separate networks (vlans) using > untagged > > vlan ports. > > > > but this schemma is possible if you have vlans support at Switch. > > > > <hos1>vlan100 ----vmbr1----bond0-------eth1-----\ > > /----port_for_vlan100 > > > > +----Switch------X > > <host2>vlan200 ----vmbr1----bond0-------eth1-----/ > > /----port_for_vlan200 > > > > Switch port for server uplink needs to be configured as trunk. > > > > Sorry for my english! > > > > > >> > >> I tryed to address my virtual_interface or enable proxy_arp on the > >> physical interface but without success... > >> > >> If you have any idea... > >> > >> Best regards. > >> > >> Jean-Mathieu > >> > >> > >> > >> > >> > >> > >> > >> > >> > >> _______________________________________________ > >> pve-user mailing list > >> [email protected] > >> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > >> > > > > > > > > -- > > ING. SILVESTRE E. FIGUEROA > > IT Consultant > > Mobile: +542616462632 > > Skype: silvestrefigueroa > > _______________________________________________ > > pve-user mailing list > > [email protected] > > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > _______________________________________________ > pve-user mailing list > [email protected] > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user > -- ING. SILVESTRE E. FIGUEROA IT Consultant Mobile: +542616462632 Skype: silvestrefigueroa _______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
