A heave only UEFI bios in serwer.
How I make start Proxmox ?
I install it, but Proxmox not start ;-/
Any ideas ?
I am using UEFI with newer servers. It works without problem. For
example, I have the boot/efi partition :
# cat /etc/fstab
# <file system> <mount point> <type> <options> <dump> <pass>
/dev/pve/root / ext4 errors=remount-ro 0 1
UUID=CF7B-601B /boot/efi vfat defaults 0 1
/dev/pve/swap none swap sw 0 0
proc /proc proc defaults 0 0
With usual servers (I have Dell ones), you have the choice in the BIOS
between lagacy BIOS or UEFI. Just choose UEFI, then boot with the last
proxmox ve iso. If you don't have the choice, only UEEFI, just boot
the iso and proceed with the installation, which is largely automated.
Alain
When I install Proxmox i heave partition like this:
Device Start End Sectors
Size Type
/dev/nvme0n1p1 34 2047 2014 1007K BIOS - boot
/dev/nvme0n1p2 2048 1050623 1048576 512M
System EFI
/dev/nvme0n1p3 1050624 976773134 975722511 465,3G Linux LVM
But the system does not start
_______________________________________________
pve-user mailing list
[email protected]
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
