So, a "bit" late... i know - but to complete this thread as "solved":
I have resolved the issue a few months ago with Aptitude install ceph This has found few depenedencies and resolved by himself. It is now working since then without any issues - Mehmet Am 16. September 2018 01:26:36 MESZ schrieb [email protected]: >Hello Marcus, > >Thanks again for your attention :) > >Downgrade is Really a passable Way - dont know why i didnt come to >this conclusion by myself ^^ > >So i tried to Downgrade via ceph-deploy install --release Jewel <host> >but didnt worked so i decide to remove and reinstal ceph again after >this. > >So i did >Ceph-deploy remove ceph (dont know the exact Commands Jet...) >this worked but this had also removed proxmox components like >proxmox-ve and qemu-server etc. Oo :*( > >Luckywise this hadnt any effect to our Running VMs.. Puh.. > >So i tried to reinstall the removed proxmox components but this is >actually Not allowed because some libaries are in use ... > >I guess i had to Reboot the Server in a Controlled way and then to >instal proxmox again hopefully without loosing the actually Running VMs >and local Storage. > >- Mehmet > >Am 14. September 2018 08:00:17 MESZ schrieb Marcus Haarmann ><[email protected]>: >>Hi, >> >>so the client is updated to luminous but kernel not (?) >>Maybe you should downgrade for the moment, as jewel clients are >>supported. >> >>Marcus Haarmann >> >> >>Von: "proxmox" <[email protected]> >>An: "pve-user" <[email protected]> >>Gesendet: Donnerstag, 13. September 2018 23:59:32 >>Betreff: Re: [PVE-User] Cant connect to ceph anymore >> >>Hey Marcus, >> >>Thanks for your Message. >> >>Am 13. September 2018 22:58:04 MESZ schrieb Marcus Haarmann >><[email protected]>: >>>Hi, >>> >>>so you would drive a 12.2 (luminous) service with a 10.x (jewel) >>>client. >> >>Sorry, with >> >>"The last Step was to Update the ceph Client on this proxmox node, but >>now i am Not able to connect to the ceph Storage anymore :*(" >> >>I ment ive upgraded this Node to 12.2.x, too. After this i had the >>descriped issue. >> >>>Just a thought: >>> >>>Check the "ceph features" output on your server if it allows jewel >>>clients. >>>Sample output should contain a group with a jewel attribute in the >>>client section. >> >>This is clean. All other Node are already luminous (but with PVE 5.x) >> >>> >>>If this is not the case, try to set: >>>ceph osd set-require-min-compat-client jewel >> >>It is already On Jewel, becouse ive upgraded from Jewel but didnt set >>this to luminous till all Node are Running luminous fine. >> >>Hope you or someone Else has Another idea why i can not See my Images >>through the proxmox GUI anymore - and so i can not start my >appropriate >>vms. >> >>- Mehmet >> >>>(which should be default for luminous, but can be removed which leads > >>>to incompability) >>> >>>Check this link for details: >>>https://ceph.com/community/new-luminous-upgrade-complete/ >>> >>>Maybe this helps, good luck >>>Marcus Haarmann >>> >>> >>>Von: [email protected] >>>An: "pve-user" <[email protected]> >>>Gesendet: Donnerstag, 13. September 2018 19:41:13 >>>Betreff: [PVE-User] Cant connect to ceph anymore >>> >>>Hi, >>> >>>I had a proxmox 4.x Server with installed ceph Jewel (10.x) via >>>ceph-deploy. >>> >>>The ceph Cluster is standalone Not managed by proxmox. >>> >>>I could use this ceph Cluster without any issues and the vms working >>>fine. >>> >>>Now I upgraded my ceph Cluster to 12.2.x and was still able to >connect >> >>>my vms via proxmox (qemu/librbd). >>> >>>The last Step was to Update the ceph Client on this proxmox node, but > >>>now i am Not able to connect to the ceph Storage anymore :*( >>> >>> >>>Actually i cannot Update the proxmox Node to 5.x because there is a >>>important vm Running with local Storage. >>> >>>Proxmox Show me a empty list when i want to Browse the ceph Cluster >>>through the gui - but i dont get any error. >>> >>>Any suggestions? >>> >>>Thanks in advise >>>- Mehmet >>>_______________________________________________ >>>pve-user mailing list >>>[email protected] >>>https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >>_______________________________________________ >>pve-user mailing list >>[email protected] >>https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user >_______________________________________________ >pve-user mailing list >[email protected] >https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
