WOW! This is it??? Geez! So simple.... Thanks a lot --- Gilberto Nunes Ferreira
(47) 3025-5907 (47) 99676-7530 - Whatsapp / Telegram Skype: gilberto.nunes36 Em ter, 6 de ago de 2019 às 06:48, Alwin Antreich <[email protected]> escreveu: > > Hello Gilberto, > > On Mon, Aug 05, 2019 at 04:21:03PM -0300, Gilberto Nunes wrote: > > Hi there... > > > > Today we have 3 servers work on Cluster HA and Ceph. > > Proxmox all nodes is 5.4 > > We have a mix of 3 SAS and 3 SATA, but just 2 SAS are using in CEPH storage. > > So, we like to reinstall each node in an HDD SSD 120GB in order to you > > the third SAS into SAS CEPH POOL. > > We get 2 POOL's: > > SAS - which content 2 HDD SAS > > SATA - which content 3 HDD SATA > > > > In general we need move the disk image in SAS POOL to SATA POOL? > > Or there any other advice in how to proceed in this case?? > As you have 3x nodes, you can simply do it one node at a time. Assuming > you are using a size 3 / min_size 2 for your Ceph pools. No need to move > any image. > > Ceph OSDs are portable, meaning, if you configure the newly installed > node to be connected (and configured) to the same Ceph cluster, the OSDs > should just pop-in again. > > First deactivate HA on all nodes. Then you could try to clone the OS > disk to the SSD (eg. clonezilla, dd). Or remove the node from the > cluster (not from Ceph) and re-install it from scratch. Later on, the > old SAS disk can be reused as additional OSD. > > -- > Cheers, > Alwin > > _______________________________________________ > pve-user mailing list > [email protected] > https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user _______________________________________________ pve-user mailing list [email protected] https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
