--- Begin Message ---
Thanks for the reply
All nodes are connected to a 10Gbit switch. Ceph is currently running on 14.2.2
but will update to the latest. KRBD was not enabled to the pool.
Before I update ceph, regarding KRBD, I've just enabled it, do I have do
re-create the pool, restart ceph, restart the node, etc... or it just takes
into effect?
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐
On Monday, June 29, 2020 9:28 PM, Lindsay Mathieson
<lindsay.mathie...@gmail.com> wrote:
> On 30/06/2020 11:08 am, jameslipski via pve-user wrote:
>
> > ust to give a little bit of a background, we currently we have 6 nodes.
> > We're running CEPH, and each node consists of
> > 2 osds (each node has 2x Intel SSDSC2KG019T8) OSD Type is bluestore. Global
> > ceph configurations (at least as shown on the proxmox interface) is as
> > follows:
>
> Network config? (ie. speed etc).
>
> Ceph is Nautilus 14.2.9? (latest on proxmox)
>
> Do you have KRBD set for the Proxmox Ceph Storage? that help a lot.
>
> ------------------------------------------------------------------------------------------------------------------------------------------------------
>
> Lindsay
>
> pve-user mailing list
> pve-user@pve.proxmox.com
> https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
--- End Message ---
_______________________________________________
pve-user mailing list
pve-user@pve.proxmox.com
https://pve.proxmox.com/cgi-bin/mailman/listinfo/pve-user
