hello
i'm already install the pvfs2-1.3.0 and it's run.but not over 10
minutes,they all down.
PS:
cd /home/tools
wget ftp://ftp.parl.clemson.edu/pub/pvfs2/pvfs2-1.3.0.tar.gz
tar zxvf pvfs2-1.3.0.tar.gz
cd pvfs2-1.3.0
./configure --prefix=/home/pvfs2 --with-kernel24=/usr/src/linux-2.4
--enable-redhat24 --enable-nptl-workaround
make
make install
make kmod24_install
cd /home/pvfs2/bin
./pvfs2-genconfig /etc/pvfs2-fs.conf /etc/pvfs2-server.conf
**********************************************************************
Welcome to the PVFS2 Configuration Generator:
This interactive script will generate configuration files suitable
for use with a new PVFS2 file system. Please see the PVFS2 quickstart
guide for details.
**********************************************************************
You must first select the network protocol that your file system will use.
The only currently supported options are "tcp" and "gm".
* Enter protocol type [Default is tcp]:
Choose a TCP/IP port for the servers to listen on. Note that this
script assumes that all servers will use the same port number.
* Enter port number [Default is 3334]:
Next you must list the hostnames of the machines that will act as
I/O servers. Acceptable syntax is "node1, node2, ..." or "node{#-#,#,#}".
* Enter hostnames [Default is localhost]: cluster{1-5}
Now list the hostnames of the machines that will act as Metadata
servers. This list may or may not overlap with the I/O server list.
* Enter hostnames [Default is localhost]: cluster1
Configured a total of 8 servers:
5 of them are I/O servers.
1 of them are Metadata servers.
* Would you like to verify server list (y/n) [Default is n]? y
****** I/O servers:
tcp://cluster1:3334
tcp://cluster2:3334
tcp://cluster3:3334
tcp://cluster4:3334
tcp://cluster5:3334
****** Metadata servers:
tcp://cluster1:3334
* Does this look ok (y/n) [Default is y]? y
Choose a file for each server to write log messages to.
* Enter log file location [Default is /tmp/pvfs2-server.log]:
Choose a directory for each server to store data in.
* Enter directory name: [Default is /pvfs2-storage-space]:
Writing fs config file... Done.
Writing 5 server config file(s)... Done.
ls /etc
pvfs2-fs.conf
pvfs2-server.conf-cluster1
pvfs2-server.conf-cluster2
pvfs2-server.conf-cluster3
pvfs2-server.conf-cluster4
pvfs2-server.conf-cluster5
cp /home/tools/pvfs2-1.3.0/examples/pvfs2-server.rc
/etc/rc.d/init.d/pvfs2-server
chmod a+x /etc/rc.d/init.d/pvfs2-server
chkconfig pvfs2-server on
ls -al /etc/rc.d/rc3.d/S35pvfs2-server
/home/pvfs2/sbin/pvfs2-server /etc/pvfs2-fs.conf
/etc/pvfs2-server.conf-cluster1 -f
/etc/rc.d/init.d/pvfs2-server start
mkdir /mnt/pvfs2
touch /etc/pvfs2tab
chmod a+r /etc/pvfs2tab
vi /etc/pvfs2tab
tcp://cluster1:3334/pvfs2-fs /mnt/pvfs2 pvfs2 default,noauto 0 0
#other 4 server's /etc/pvfs2tab is tcp://cluster2:3334/pvfs2-fs /mnt/pvfs2
pvfs2 default,noauto 0 0;tcp://cluster3:3334/pvfs2-fs /mnt/pvfs2 pvfs2
default,noauto 0 0;
#tcp://cluster4:3334/pvfs2-fs /mnt/pvfs2 pvfs2 default,noauto 0
0;tcp://cluster5:3334/pvfs2-fs /mnt/pvfs2 pvfs2 default,noauto 0 0
/home/pvfs2/bin/pvfs2-ping -m /mnt/pvfs2
(1) Parsing tab file...
(2) Initializing system interface...
(3) Initializing each file system found in tab file: /etc/pvfs2tab...
/mnt/pvfs2: Ok
(4) Searching for /mnt/pvfs2 in pvfstab...
PVFS2 servers: tcp://cluster1:3334
Storage name: pvfs2-fs
Local mount point: /mnt/pvfs2
meta servers:
tcp://cluster1:3334
data servers:
tcp://cluster1:3334
tcp://cluster2:3334
tcp://cluster3:3334
tcp://cluster4:3334
tcp://cluster5:3334
(5) Verifying that all servers are responding...
meta servers:
tcp://cluster1:3334 Ok
data servers:
tcp://cluster1:3334 Ok
tcp://cluster2:3334 Ok
tcp://cluster3:3334 Ok
tcp://cluster4:3334 Ok
tcp://cluster5:3334 Ok
(6) Verifying that fsid 151391925 is acceptable to all servers...
Ok; all servers understand fs_id 151391925
(7) Verifying that root handle is owned by one server...
Root handle: 1048576
Ok; root handle is owned by exactly one server.
=============================================================
The PVFS filesystem at /mnt/pvfs2 appears to be correctly configured.
cd /home/pvfs2/sbin
./pvfs2-client -p ./pvfs2-client-core
insmod /home/tools/pvfs2-1.3.0/src/kernel/linux-2.4/pvfs2.o
mount -t pvfs2 pvfs2 /mnt/pvfs2 -o tcp://cluster1:3334/pvfs2-fs
############################################################################
other 4 server's
{
cluster2:
cd /home/pvfs2/sbin
./pvfs2-client -p ./pvfs2-client-core
insmod /home/tools/pvfs2-1.3.0/src/kernel/linux-2.4/pvfs2.o
mount -t pvfs2 pvfs2 /mnt/pvfs2 -o tcp://cluster2:3334/pvfs2-fs
cluster3:
cd /home/pvfs2/sbin
./pvfs2-client -p ./pvfs2-client-core
insmod /home/tools/pvfs2-1.3.0/src/kernel/linux-2.4/pvfs2.o
mount -t pvfs2 pvfs2 /mnt/pvfs2 -o tcp://cluster3:3334/pvfs2-fs
cluster4:
cd /home/pvfs2/sbin
./pvfs2-client -p ./pvfs2-client-core
insmod /home/tools/pvfs2-1.3.0/src/kernel/linux-2.4/pvfs2.o
mount -t pvfs2 pvfs2 /mnt/pvfs2 -o tcp://cluster4:3334/pvfs2-fs
cluster5:
cd /home/pvfs2/sbin
./pvfs2-client -p ./pvfs2-client-core
insmod /home/tools/pvfs2-1.3.0/src/kernel/linux-2.4/pvfs2.o
mount -t pvfs2 pvfs2 /mnt/pvfs2 -o tcp://cluster5:3334/pvfs2-fs
}
###############################################################################
cp test.tar.gz /mnt/pvfs2
ls /mnt/pvfs2
can see the file test.tar.gz,in other 4 host run ls /mnt/pvfs2 also can
see the file.
next,i run
tar zxvf test.tar.gz
it's ok,but A little minutes after,they all down,tar stop,nothing error
messages!
_________________________________________________________________
与联机的朋友进行交流，请使用 MSN Messenger: http://messenger.msn.com/cn
_______________________________________________
PVFS2-developers mailing list
[email protected]
http://www.beowulf-underground.org/mailman/listinfo/pvfs2-developers
