Hi, I reconfigure, and installed all things again. With berkeley DB 4.3 and
IT WORKS! lol very thank you Sam, Murali. The result of strace command is in a file attached with previous email. Again, very thanks. thanks Luiz Mendes 2007/1/12, Luiz Mendes <[EMAIL PROTECTED]>:
I reconfigure, and installed all things again. With berkeley DB 4.3 and IT WORKS! lol very thank you Sam, Murali. The result of strace command is in a file attached with this email. thanks Luiz Mendes 2007/1/12, Sam Lang <[EMAIL PROTECTED]>: > > > Hi Luiz, > > Can you run: > > strace pvfs2-ls > > And send us the output? > > Thanks, > > -sam > > On Jan 12, 2007, at 3:03 PM, Luiz Mendes wrote: > > > I forgot to say that pvfs2-ls loops continue. > > > > Thanks > > > > 2007/1/12, Luiz Mendes <[EMAIL PROTECTED]>: Hi Sam, thank you > > Sam for atention. > > > > I saw this previous thread few minutes ago, and i reconfigure with - > > with-db referencing to an older version, 4.0. > > > > And when i executed pvfs2-server again, apeared this thins in log. > > > > [D 01/12 18:51] PVFS2 Server version 2.6.1 starting. > > [E 01/12 18:51] Error: BMI_sockio_bind_sock: Address already in use > > [E 01/12 18:51] Error: tcp_server_init() failure. > > [E 01/12 18:51] Error: BMI_initialize: Address already in use > > [E 01/12 18:51] Error: Could not initialize server interfaces; > > aborting. > > [E 01/12 18:51] Error: Could not initialize server; aborting. > > > > but pvfs2-server return that the server started, and pvfs2-ping > > command after return that the server is configured correctly, > > despite of this log error. > > > > Now, during pvfs2-ls command, doesnt appear nothing recorded in > > log. Only during pvfs2-server command. > > > > I try to stop pvfs2-server using option stop after this command, > > but it restarts again. > > > > Thanks > > > > > > 2007/1/12, Sam Lang <[EMAIL PROTECTED]>: > > > > Hi Luiz, > > > > We've seen this with the newest version of Berkeley DB. See Murali's > > comments from a previous thread: > > > > http://www.beowulf-underground.org/pipermail/pvfs2-users/2006- > > December/001673.html > > > > You should be able to use berkeley db 4.3 just fine, so if you have > > an older version installed (or can download and install it), you can > > use the --with-db option to configure while building pvfs to point it > > at the older version. > > > > -sam > > > > On Jan 12, 2007, at 2:30 PM, Luiz Mendes wrote: > > > > > Hi Murali, > > > > > > Firstly i would like to thank for your kindness and atention. > > > > > > I execute this code line and after i startes pvfs2-server command > > > % pvfs2-server /etc/pvfs/fs.conf /etc/pvfs/server.conf-luizmendes > > > > > > and log file /tmp/pvfs2- server.log registered this following line > > > [D 01/12 18:21] PVFS2 Server version 2.6.1 starting. > > > > > > After this i executed > > > % pvfs2-ping -m /mnt/pvfs2 > > > > > > And this command didnt record nothing in log file. And this command > > > returned: > > > The PVFS2 filesystem at /mnt/pvfs2 appears to be correctly > > > configured. > > > > > > Now command, % pvfs2-ls /mnt/pvfs2 -V > > > and it entered in loop and recorded this following message several > > > times in log > > > > > > [E 01/12 18:28] TROVE:DBPF:Berkeley DB: keyval_db->get (handle > > > info): DB_BUFFER_SMALL: User memory too small for return value > > > > > > > > > Thanks. > > > > > > Luiz Mendes > > > > > > > > > 2007/1/12, Murali Vilayannur < [EMAIL PROTECTED]>:Hi Luiz, > > > Are you using it over TCP or any of the other supported BMI > > networks? > > > Something is definitely wrong with some of the most recent releases > > > (or even HEAD) > > > since this is the 2nd (or 3rd?) report of infinite looping on the > > > client-side.. > > > Can you turn on verbose event logging on the servers...you can do > > this > > > by running.. > > > % pvfs2-setdebugmask -m "pvfs mount point from pvfs2tab file" > > verbose > > > > > > I haven't had the chance to reproduce this yet.. > > > If noone else beats me to it, I guess I can take a stab at this > > > tonight. > > > Sam, Pete, RobL, RobR: any clues on what is happening? > > > thanks, > > > Murali > > > > > > On 1/12/07, Luiz Mendes <[EMAIL PROTECTED]> wrote: > > > > Hi, > > > > > > > > I got PVFS-2.6.1 and i did begin installation procedures > > > according to pvfs2 > > > > official website. > > > > > > > > It works until testing. pvfs2-ping command worked correctly, but > > > pvfs2-ls > > > > didnt return anything and it was in loop state, running > > indefinitly. > > > > > > > > I stop pvfs2-ls process and i did try pvfs-cp example, and it > > > didnt work > > > > too, return the following message: > > > > > > > > PVFS_sys_create: File exists > > > > Could not open /mnt/pvfs3/testfile2 > > > > > > > > * pvfs3 is the other name that i choose, it didnt work > > previously in > > > > /mnt/pvfs2 too. > > > > > > > > i am using SUSE 10.1. > > > > > > > > Could you help me? > > > > > > > > _______________________________________________ > > > > Pvfs2-users mailing list > > > > [email protected] > > > > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > > > > > > > > > > > > > > > > > > _______________________________________________ > > > Pvfs2-users mailing list > > > [email protected] > > > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > > > > > > > > _______________________________________________ > > Pvfs2-users mailing list > > [email protected] > > http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users > >
_______________________________________________ Pvfs2-users mailing list [email protected] http://www.beowulf-underground.org/mailman/listinfo/pvfs2-users
